Introduction
Thank you for choosing the Goobay 67140 Satellite Finder. This device is designed to assist you in precisely aligning your satellite antenna for optimal signal reception. Featuring an illuminated LCD display and digital field strength indication, it simplifies the process of satellite dish installation and adjustment.
Please read this manual thoroughly before using the device to ensure safe and correct operation.
Product Overview
Figure 1: Goobay 67140 Satellite Finder and Coaxial Cable. This image shows the main unit of the satellite finder, featuring an LCD screen, control buttons, and F-connectors on both sides. Below it, a short coaxial cable with F-connectors is displayed, which is used for connecting the device.
Figure 2: Goobay 67140 Satellite Finder Product Packaging. The image displays the retail box for the satellite finder, showing the device and its included cable through a clear window. The box highlights key features and branding.
The Goobay 67140 Satellite Finder is a compact and portable device designed for easy use. It includes an illuminated LCD display for clear readings and a built-in buzzer for audible signal strength indication. The device is microprocessor-controlled, ensuring accurate measurements.
Key Features:
- Illuminated LCD display with digital display of the field strength of the satellite signal.
- Microprocessor controlled for precise measurements.
- Damping controller permits optimal adaptation of signal strength.
- Signal amplifier of the buzzer can be switched off and adjusted.
- Simple installation between LNB and receiver.
Setup and Installation
Proper setup is crucial for accurate satellite signal alignment. Follow these steps carefully:
- Power Off: Ensure your satellite receiver is powered off before making any connections.
- Connect to LNB: Connect the cable from your LNB (Low Noise Block, located on the satellite dish arm) to the "LNB" input port on the Goobay 67140 Satellite Finder.
- Connect to Receiver: Connect a short coaxial cable (typically included) from the "RECEIVER" output port on the Satellite Finder to the "LNB IN" input on your satellite receiver.
- Power On: Turn on your satellite receiver. The Satellite Finder will receive power from the receiver via the coaxial cable.
- Initial Check: The LCD display should illuminate and show a signal strength reading. If not, check all connections.
Figure 3: Compact Dimensions and Included F-Connection Cable. This diagram illustrates the physical dimensions of the Goobay 67140 Satellite Finder (128mm x 68mm x 28mm) and the length of the included coaxial F-connection cable (120mm), highlighting its compact size for portability and ease of use.
Operating Instructions
Once connected, the Goobay 67140 Satellite Finder assists in fine-tuning your satellite dish.
Signal Adjustment:
- Adjust Attenuation (ATT): If the signal strength reading is too high (e.g., consistently at 99% or maxed out), use the "ATT" (Attenuation) buttons to decrease the sensitivity. This prevents saturation and allows for more precise adjustments. Conversely, if the signal is too low, decrease attenuation.
- Align Dish: Slowly adjust the azimuth (horizontal) and elevation (vertical) of your satellite dish. Observe the digital signal strength reading on the LCD display and listen to the buzzer.
- Maximize Signal: Continue adjusting until you achieve the highest possible signal strength reading and the most rapid beeping sound. Make small, incremental adjustments.
- Fine-tuning: Once the peak signal is found, slightly reduce the attenuation (increase sensitivity) and make very small adjustments to maximize the signal further.
- Lock Dish: Carefully tighten all bolts on your satellite dish mount, ensuring the dish does not move during the process. Re-check the signal strength after tightening.
Buzzer and Light Functions:
- Buzzer: The buzzer provides an audible indication of signal strength. A faster, higher-pitched sound indicates a stronger signal. The buzzer can be switched off or adjusted using the dedicated buttons.
- Light: The "Light" button activates the backlight for the LCD display, useful in low-light conditions.
- Compass: A small integrated compass can assist with initial directional alignment, though fine-tuning with the signal meter is always required.
Maintenance
The Goobay 67140 Satellite Finder requires minimal maintenance to ensure its longevity and accurate performance.
- Cleaning: Wipe the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Connections: Ensure all coaxial connectors are clean and free of debris. Periodically check for any signs of corrosion.
- Water Exposure: This device is not waterproof. Avoid exposure to rain or excessive moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display/No power | Incorrect connection; Satellite receiver off; Faulty cable. | Ensure all cables are securely connected. Turn on satellite receiver. Test with a different coaxial cable. |
| Signal reading always 99% (maxed out) | Signal too strong; Attenuation not set correctly. | Press the "ATT" button to increase attenuation until the reading is within a usable range (e.g., 50-70%). |
| No signal reading (0%) | Dish not aimed correctly; LNB faulty; Cable issue. | Ensure the dish is roughly aimed at the correct satellite. Check LNB for damage. Verify cable integrity. |
| Buzzer not working | Buzzer switched off or volume too low. | Press the "Buzzer" button to activate or adjust its volume. |
Specifications
- Model: Goobay 67140
- Display Type: LCD (Illuminated)
- Connectivity: Coaxial F-connectors
- Power Supply: Via satellite receiver (DC 13-18V)
- Special Features: Digital signal strength display, adjustable attenuation, adjustable buzzer, integrated compass, backlight.
- Dimensions: Approximately 12.8 x 6.8 x 2.8 cm
- Weight: Approximately 106 g
- Compatible Devices: Satellite Dish, Satellite Receiver
Warranty and Support
Goobay products are designed for reliability and performance. For warranty information and technical support, please refer to the official Goobay website or contact your local distributor.
Please retain your proof of purchase for any warranty claims.
