Leviton EL05-50B 5-Degree Ellipsoidal Spotlight User Manual

1. Product Overview

The Leviton 5/50 Ellipsoidal Spotlight is engineered for precise lighting applications, allowing users to frame specific areas, project patterns, and create various dramatic lighting effects. Its robust construction includes thermal insulation, ensuring safe and convenient handling during operation and adjustment. This fixture is supplied with essential accessories for immediate deployment, including a safety cable for secure installation, a C-clamp for mounting, and a color frame for gel insertion.

Image: The Leviton EL05-50B 5-Degree Ellipsoidal Spotlight, shown in black, with its C-clamp and color frame visible. This image illustrates the overall design and key components of the spotlight.

2. Key Features

• Insulated Handle: The spotlight features an insulated handle designed to center the lamp precisely within the reflector, optimizing light output and distribution.
• Adjustable Lens Tube: The lens tube can be moved externally from the shroud and is securely fastened by a top-mounted insulated handle, allowing for precise focus adjustments.
• Yoke with Clutch Disk: The yoke hardware incorporates a positive locking clutch disk, providing reliable and precise control over the fixture's tilt angle.
• Versatile Beam Angles: This model is part of a series available in various beam angles, including 5, 10, 15, 20, 30, 40, or 50-degree versions, catering to diverse lighting requirements.
• 5-Degree Specifics: The 5-degree version is equipped with a rugged lens tube capable of mounting a 1 to 10-inch diameter lens and includes an integral color frame holder for gels.

3. Setup and Installation

Proper setup is crucial for the safe and effective operation of your Leviton Ellipsoidal Spotlight. Always ensure the fixture is securely mounted and all connections are made correctly.

3.1 Mounting with C-Clamp

1. Identify a suitable mounting point, such as a lighting truss or pipe, capable of supporting the fixture's weight (approximately 28 pounds).
2. Attach the provided C-clamp to the mounting point. Ensure the clamp is tightened securely to prevent any movement.
3. Connect the spotlight's yoke to the C-clamp using the appropriate hardware. Verify that the connection is firm and stable.

3.2 Attaching Safety Cable

A safety cable is a critical component for preventing accidental falls and ensuring safety.

• Loop the safety cable through a secure part of the fixture's body and around the mounting structure (e.g., truss or pipe).
• Securely fasten the safety cable, ensuring there is minimal slack. The safety cable should be able to hold the full weight of the fixture independently.

3.3 Electrical Connection

This fixture uses bare wire for electrical connection. Professional installation by a qualified electrician is recommended.

• Ensure power is disconnected before making any electrical connections.
• Connect the bare wires to a compatible power source according to local electrical codes and standards.
• Verify all connections are secure and properly insulated.

4. Operating Instructions

Once installed, the Leviton Ellipsoidal Spotlight offers various adjustments for precise light control.

4.1 Adjusting Focus and Beam

• To adjust the focus of the light beam, gently slide the lens tube in or out of the shroud using the top insulated handle.
• Once the desired focus is achieved, ensure the insulated handle is tightened to secure the lens tube in place.

4.2 Adjusting Tilt

• The yoke hardware includes a positive locking clutch disk for tilt control. Loosen the clutch disk to adjust the vertical angle of the spotlight.
• Once the desired tilt angle is set, tighten the clutch disk firmly to lock the fixture in position.

4.3 Using Color Frames

• Insert standard color gels or gobos into the integral color frame holder located at the front of the fixture.
• Ensure the color frame is securely seated to prevent it from falling out during operation.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Leviton Ellipsoidal Spotlight.

5.1 Cleaning

• Disconnect power before cleaning.
• Wipe the exterior of the fixture with a soft, dry cloth.
• For lenses and reflectors, use a specialized lens cleaning solution and a microfiber cloth to avoid scratches.
• Do not use abrasive cleaners or solvents.

5.2 Inspection

• Periodically inspect the safety cable, C-clamp, and all mounting hardware for signs of wear or damage.
• Check electrical connections for any fraying or loose wiring.
• Ensure all moving parts, such as the lens tube and yoke, operate smoothly.

6. Troubleshooting

This section provides solutions to common issues you might encounter with your spotlight.

7. Specifications

8. Warranty and Support

Specific warranty details for the Leviton EL05-50B Ellipsoidal Spotlight are not provided in this manual. For warranty information, technical support, or service inquiries, please contact Leviton customer service directly or visit their official website.

Leviton Official Website: www.leviton.com

Please have your model number (EL05-50B) and purchase date available when contacting support.