Introduction
This manual provides essential instructions for the proper setup, operation, and maintenance of your Sony PSP GO!Cam 450x Camera. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
The GO!Cam 450x is designed to enhance your PlayStation Portable (PSP) experience by enabling photo and video capture directly through your device.
Compatibility
The Sony PSP GO!Cam 450x Camera is compatible with the following PlayStation Portable models:
- PSP-1000 series
- PSP-2000 series
- PSP-3000 series
Important: This camera is not compatible with the PSP Go (PSP-N1000 series) system.
Setup
1. Connecting the Camera
- Ensure your PSP system is powered off or in standby mode.
- Locate the USB port on the top of your compatible PSP model.
- Carefully align the GO!Cam 450x connector with the PSP's USB port.
- Gently push the camera into the port until it is firmly seated. Avoid excessive force.
Image: The Sony PSP GO!Cam 450x Camera connected to the top of a PSP system.
2. Firmware Requirements
For the GO!Cam 450x to function correctly, your PSP system must be running firmware version 6.0 or higher. It is recommended to update your PSP to the latest official firmware version available from Sony.
- To check your PSP's firmware version: Go to Settings > System Settings > System Information.
- If an update is required, connect your PSP to the internet and navigate to Settings > System Update.
Operating the Camera
1. Accessing the Camera Application
- With the GO!Cam 450x connected, power on your PSP.
- Navigate to the Photo icon on the PSP's XrossMediaBar (XMB).
- Select the Camera option. The camera application should launch, displaying a live feed from the GO!Cam 450x.
Image: Illustrative view of the PSP XMB with the 'Camera' option highlighted under the 'Photo' menu.
2. Capturing Photos and Videos
The GO!Cam 450x supports both still image capture and video recording. The specific controls for these functions will be displayed within the camera application on your PSP screen.
- Typically, the X button is used to take a photo or start/stop video recording.
- Use the directional pad or analog stick to navigate menu options within the camera application.
- Captured media is saved to your PSP's Memory Stick Duo.
Maintenance
1. Cleaning the Camera and PSP Port
To ensure reliable connection and clear image quality, keep the camera lens and the PSP's USB port clean.
- Use a soft, lint-free cloth to gently wipe the camera lens. Avoid abrasive materials or harsh chemicals.
- If the PSP's USB port accumulates dust or debris, carefully use a small, non-metallic tool (like a plastic toothpick or compressed air) to clean it. Ensure the PSP is powered off before cleaning the port.
Image: A close-up of the GO!Cam 450x, illustrating the lens area for cleaning.
2. Storage
When not in use, store the GO!Cam 450x in a clean, dry place, away from direct sunlight and extreme temperatures. Consider using a protective case to prevent scratches or damage.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Camera not recognized by PSP. |
|
| Camera light does not turn on. |
|
| Poor image or video quality. |
|
| Camera does not work with Skype. |
The Sony PSP GO!Cam 450x Camera is not designed to be compatible with Skype on the PSP platform. |
Specifications
| Feature | Detail |
|---|---|
| Model | GO!Cam 450x |
| Manufacturer | Sony |
| Compatibility | PSP-1000, PSP-2000, PSP-3000 series |
| Functions | Still image capture, Video recording |
| Item Weight | 1.76 ounces (approximately 50 grams) |
| Package Dimensions | 6.97 x 4.13 x 0.94 inches (17.7 x 10.5 x 2.4 cm) |
| Date First Available | April 29, 2011 |
Warranty and Support
For information regarding product warranty, please refer to the documentation included with your original purchase or visit the official Sony support website. If you encounter issues not covered in this manual, or require further assistance, please contact Sony customer support.
Sony Support Website: https://www.playstation.com/support/
