Product Overview
The Tech Lighting FJ-Scania Head 6IN metal spotlight is a European-inspired low-voltage lighting head designed for directional illumination. It features a clean design with a satin nickel finish, making it suitable for various indoor applications.
Key features include:
- Designed for Free Jack low-voltage systems.
- Accepts an MR16 lamp of up to 50 watts (lamp not included).
- Head rotates 360 degrees and pivots 180 degrees for precise beam direction.
- Includes a Snap Louver Lens Holder for optional lenses or louvers (sold separately).
- Satin Nickel finish.
Figure 1: The FJ-Scania Head 6IN metal spotlight, showcasing its sleek design and satin nickel finish. This image illustrates the main body of the spotlight and its connection point.
Setup and Installation
This product is designed for use with a compatible low-voltage Free Jack system. Professional installation is recommended. Ensure power is disconnected before beginning installation.
1. Lamp Installation (MR16)
- Ensure the power to the lighting system is turned off at the circuit breaker.
- Carefully insert the MR16 lamp (up to 50 watts, 12 volts) into the lamp holder within the spotlight head. Ensure the pins align correctly with the socket.
- Do not touch the glass of the MR16 lamp directly with bare hands, as oils can reduce lamp life. Use a clean cloth or gloves.
2. Attaching to Free Jack System
- Refer to your Free Jack system's instruction manual for specific attachment procedures.
- Securely connect the spotlight head to the Free Jack connector. Ensure a firm connection to prevent flickering or power loss.
- Once installed, restore power to the system and test the light.
Operating Instructions
The FJ-Scania Head is designed for flexible light direction.
Adjusting Light Direction
- Rotation: The entire head can be rotated 360 degrees around its axis to direct light horizontally. Gently turn the head to the desired position.
- Pivot: The head can pivot 180 degrees vertically, allowing you to aim the light up or down. Carefully adjust the angle of the head.
Avoid excessive force when adjusting to prevent damage to the fixture or its connection.
Maintenance
Regular maintenance ensures optimal performance and longevity of your spotlight.
Cleaning
- Ensure the fixture is cool and power is off before cleaning.
- Wipe the exterior surfaces with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
Lamp Replacement
- Turn off power to the fixture and allow the lamp to cool completely.
- Carefully remove the old MR16 lamp by pulling it straight out from its socket.
- Insert a new MR16 lamp (up to 50 watts, 12 volts) by aligning the pins with the socket and pushing gently until seated.
- Avoid touching the new lamp's glass with bare hands.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Lamp is faulty or not seated correctly. Loose connection to Free Jack system. | Check circuit breaker and wall switch. Replace MR16 lamp or ensure it is fully inserted. Verify secure connection to the Free Jack system. |
| Light flickers. | Loose lamp connection. Incompatible dimmer (if applicable). Faulty lamp. | Ensure lamp is fully seated. Consult Free Jack system manual for dimmer compatibility. Replace lamp. |
| Light is dim. | Incorrect lamp wattage. Voltage drop in system. Lamp nearing end of life. | Ensure correct 50-watt MR16 lamp is used. Consult an electrician for system voltage check. Replace lamp. |
If troubleshooting steps do not resolve the issue, contact a qualified electrician or customer support.
Specifications
| Brand | Tech Lighting |
| Model Number | 700FJSCAN06MS |
| Material | Metal |
| Finish | Satin Nickel |
| Light Source Type | Halogen (MR16) |
| Maximum Wattage | 50 watts |
| Voltage | 12 Volts |
| Mounting Type | Wall Mount (via Free Jack system) |
| Specific Uses | Indoor use only |
| Certifications | UL Listed |
| Item Weight | 1 Pound |
Warranty Information
This Tech Lighting product is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation provided with your purchase or visit the official Tech Lighting website.
Customer Support
For technical assistance, replacement parts, or any questions not covered in this manual, please contact Tech Lighting customer support. You can find contact information on the official Tech Lighting website or through your authorized dealer.
Online Resources: Visit the Tech Lighting Store on Amazon