Xantech DL85K IR Receiver Kit Instruction Manual

1. Introduction

The Xantech DL85K IR Receiver Kit is designed to extend infrared (IR) remote control signals to audio/video components that are hidden from view. This kit allows you to control devices such as cable boxes, satellite receivers, and TVs even when they are enclosed in cabinets or located in another room. Its proprietary ambient noise-suppression technology ensures reliable operation in various lighting conditions, including environments with compact fluorescent (CFL) lighting, LED, and LCD displays.

The compact design of the IR receiver, known as the "Dinky Link," allows for discreet placement in small spaces, such as under shelf edges or behind speaker grilles, while maintaining a reception range of up to 80 feet (24 meters).

2. Package Contents

Please verify that all items listed below are present in your package:

• DL85K IR Receiver (Dinky Link)
• Connecting Block (IR Repeater Main Unit)
• IR Emitters (Flashers)
• Power Supply
• Trim Kit (White, Silver, Black) for IR Receiver
• Adhesive pads for mounting

3. Safety Information

• Do not expose the unit to moisture or extreme temperatures.
• Ensure the power supply is connected to a compatible power outlet.
• Do not attempt to open or service the unit yourself. Refer all servicing to qualified personnel.
• Keep out of reach of children.
• Avoid placing the IR receiver in direct sunlight or near strong light sources, as this may interfere with performance.

4. Setup and Installation

Follow these steps to install your Xantech DL85K IR Receiver Kit:

4.1. Identify Components

Familiarize yourself with the IR receiver, connecting block, and IR emitters. The connecting block acts as the central hub, receiving signals from the IR receiver and relaying them to your components via the emitters.

Figure 1: The Xantech DL85K IR Receiver Kit components. This image displays the Dinky Link IR receiver, the central connecting block, several IR emitters, and the power adapter, which are all essential for the system's operation.

4.2. Placement of the IR Receiver (Dinky Link)

1. Choose a discreet location for the IR receiver where it has a clear line of sight to your remote control. Common locations include the edge of a TV frame, under a shelf, or behind a speaker grille.
2. Use the included trim kit (white, silver, or black) to match your decor.
3. Secure the IR receiver using the provided adhesive pad. Ensure the IR eye is facing the area where you will be using your remote control.
4. Route the cable from the IR receiver to the location of your connecting block.

4.3. Connecting the Components

1. Connect IR Receiver to Connecting Block: Plug the cable from the IR receiver into the designated "IR IN" port on the connecting block. This port is typically color-coded (e.g., red).
2. Connect IR Emitters to Connecting Block: Plug the IR emitters into the "IR OUT" ports on the connecting block. These ports are typically color-coded (e.g., yellow). You can connect multiple emitters if you have several components to control.
3. Attach Emitters to A/V Components: Carefully attach each IR emitter directly over the IR sensor window of the A/V component you wish to control. The IR sensor is usually a small, dark window on the front panel of your device. Use the provided adhesive pads to secure the emitters.
4. Connect Power Supply: Plug the power supply into the connecting block's power input, then plug the power supply into a standard electrical outlet. The connecting block should have an indicator light to confirm it is powered on.

Tip: To locate the IR sensor on your A/V component, shine a flashlight at the front panel. The sensor often appears as a small, dark, rectangular or circular window. Alternatively, consult your component's instruction manual.

5. Operating Instructions

Once installed, operating the Xantech DL85K IR Receiver Kit is straightforward:

1. Point your existing remote control at the Xantech DL85K IR Receiver.
2. Press the desired button on your remote.
3. The IR receiver will capture the signal and transmit it to the connecting block.
4. The connecting block will then send the signal through the IR emitters to your hidden A/V components, allowing them to respond as if the remote were pointed directly at them.

The system is designed to work with all standard IR remote controls and a wide range of A/V equipment, including cable boxes, satellite boxes, and various TV types (LED, LCD, Plasma).

6. Maintenance

The Xantech DL85K IR Receiver Kit requires minimal maintenance:

• Cleaning: Use a soft, dry cloth to gently wipe the IR receiver and connecting block. Do not use liquid cleaners or abrasive materials.
• Cable Management: Ensure all cables are neatly routed and not pinched or strained, which could lead to damage.
• Emitter Placement: Periodically check that the IR emitters remain securely attached over the IR sensors of your A/V components.

7. Troubleshooting

If you experience issues with your Xantech DL85K IR Receiver Kit, refer to the following troubleshooting guide:

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the official Xantech website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty claims.

Xantech Official Website: www.xantech.com