1. Product Overview
The Woods 59743WD Indoor Plug-In Wireless Remote Control system provides convenient remote operation for indoor lighting and appliances. This unit includes one wireless remote transmitter and one grounded outlet receiver, allowing you to control devices from a distance of up to 100 feet, even through walls, doors, and glass. It is designed to help save energy by cutting power to devices in the OFF position, eliminating wasteful standby power. Ideal for hard-to-reach lamps, holiday decorations, and various home appliances.
Image: The Woods 59743WD wireless remote control and the grounded outlet receiver. The remote has ON/OFF buttons, and the receiver plugs into a standard wall outlet.
2. Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- For indoor use only. Do not expose to water or moisture.
- Do not exceed the maximum electrical ratings: 125V, 13A, 1625W Resistive (General Purpose), 8A, 500W Tungsten, 1/3 HP.
- Ensure the outlet is properly grounded.
- Unplug the device from the outlet before cleaning or when not in use for extended periods.
- Do not attempt to disassemble or repair the unit. Refer all servicing to qualified personnel.
- Keep out of reach of children.
3. Package Contents
- 1 x Woods Wireless Remote Control Transmitter
- 1 x Woods Grounded Outlet Receiver
- 1 x A23 Battery (pre-installed in remote)
Image: The retail packaging for the Woods 59743WD, showing the remote and outlet receiver, along with product specifications and features.
4. Product Features
- Wireless Control: Operate lighting or home appliances from a distance.
- Extended Range: Remote works up to 100 feet away, even through walls, doors, and glass.
- Energy Saving: Cuts power to devices in the OFF position, eliminating standby power consumption.
- Easy Setup: Fast, tool-free installation.
- Versatile Compatibility: Compatible with CFL, LED, and incandescent bulbs.
- Grounded Outlet: Provides a safe and secure connection for your electronics.
5. Setup and Installation
- Insert Battery (if not pre-installed): The remote control uses one A23 battery. Ensure it is correctly inserted with the positive (+) and negative (-) terminals aligned. (Note: Battery is typically pre-installed).
- Plug in the Receiver: Insert the Woods wireless outlet receiver into any standard 125V grounded wall outlet.
- Connect Your Device: Plug the appliance or lamp you wish to control into the grounded outlet on the receiver unit.
- Test Operation: Press the "ON" button on the remote control to turn on the connected device. Press the "OFF" button to turn it off.
Image: A view of the grounded plug on the Woods outlet receiver and the side profile of the remote control, illustrating their compact design.
6. Operating Instructions
Using the Woods wireless remote control is straightforward:
- To turn on the connected device, press the ON button on the remote control.
- To turn off the connected device, press the OFF button on the remote control.
- The remote can control the outlet from up to 100 feet away, even if there are obstacles like walls or furniture between the remote and the receiver.
Image: A side view of the Woods wireless remote control and the outlet receiver, highlighting their relative sizes and design.
7. Maintenance
- Cleaning: Disconnect the receiver from the power outlet before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: If the remote control's range decreases or it stops responding, the A23 battery may need replacement. To replace, open the battery compartment on the back of the remote, remove the old battery, and insert a new A23 battery, observing polarity.
- Storage: Store the unit in a cool, dry place when not in use for extended periods.
Image: A close-up side view of the Woods wireless remote control, showing its slightly curved back design.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn ON/OFF. | 1. Receiver not plugged in. 2. Device not plugged into receiver. 3. Remote battery is dead or low. 4. Device connected to receiver is faulty. 5. Exceeded maximum wattage. | 1. Ensure receiver is securely plugged into a live wall outlet. 2. Ensure device is securely plugged into the receiver. 3. Replace the A23 battery in the remote control. 4. Test the device by plugging it directly into a wall outlet. 5. Check the wattage of the connected device and ensure it is within the unit's specifications (max 1625W). |
| Reduced remote range. | 1. Low remote battery. 2. Excessive interference or obstacles. | 1. Replace the A23 battery in the remote control. 2. Try operating the remote from a different position or closer to the receiver. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | 59743WD |
| Operating Voltage | 125 Volts |
| Current Rating | 13 Amps |
| Wattage (Resistive) | 1625 Watts |
| Wattage (Tungsten) | 500 Watts |
| Horsepower | 1/3 HP |
| Control Method | Remote |
| Wireless Range | Up to 100 feet (30.5 meters) |
| Usage Environment | Indoor |
| Remote Battery Type | A23 Alkaline (12V) |
| Dimensions (L x W x H) | 7.25 x 5.25 x 2.5 inches |
| Item Weight | 6.1 ounces |
10. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official Woods website. Keep your purchase receipt as proof of purchase for any warranty claims.
A digital version of the user manual may also be available for download from the manufacturer's website or the product's listing page.
Note: This manual provides general instructions. Specific warranty terms and support contact details may vary.
