Quantum QEQ5

Quantum 5-Band Equalizer (Model QEQ5) User Manual

Your guide to optimal audio control.

Product Overview

The Quantum 5-Band Equalizer (Model QEQ5) is designed to provide precise audio control for your car audio system. This unit features five bands of stereo equalization, allowing you to fine-tune your sound for optimal clarity and balance. With a high output voltage and dedicated controls for subwoofer output, it offers versatile integration into various audio setups.

Quantum 5-Band Equalizer QEQ5 front view with illuminated knobs

Figure 1: Front view of the Quantum 5-Band Equalizer (QEQ5) showing the five equalization knobs, master volume, subwoofer volume, and input selector. The knobs are illuminated with a blue light.

Key Features:

  • Five bands of stereo equalization for precise audio tuning.
  • Volume gain with up to 8 volts of output for powerful sound.
  • Variable subwoofer output control for dedicated bass management.
  • Main / DVD input selector for source switching.
  • Gold plated RCA input connectors for optimal signal transfer.
  • Selectable 43Hz-60Hz subwoofer crossover for tailored bass response.
  • Blue power-on illumination for enhanced visibility and aesthetics.

Installation and Setup

Proper installation is crucial for optimal performance and safety. It is recommended that installation be performed by a qualified professional.

Mounting:

Choose a secure, dry location away from direct heat or moisture. Ensure adequate ventilation around the unit. Use the provided mounting hardware to secure the equalizer firmly.

Wiring Connections:

Before making any connections, disconnect the vehicle's negative battery terminal to prevent electrical shorts.

  1. Power Connection: Connect the +12V terminal of the equalizer to a fused +12V constant power source from the vehicle's battery. Connect the GND terminal to a clean chassis ground point. Connect the REM (remote) terminal to the remote turn-on output of your head unit.
  2. Input Connections: Connect the RCA output from your head unit (Main or DVD) to the corresponding RCA input on the equalizer. Ensure correct left and right channel connections.
  3. Output Connections: Connect the RCA output from the equalizer to the RCA input of your amplifier(s). For subwoofer output, connect the dedicated subwoofer RCA output from the equalizer to your subwoofer amplifier's input.

Note: Always use high-quality RCA cables to minimize noise and interference.

Operating Instructions

Once installed and powered on, the Quantum 5-Band Equalizer provides intuitive controls for audio customization.

Front Panel Controls:

  • Master Volume Knob: Adjusts the overall output volume of the system.
  • Subwoofer Volume Knob: Controls the output level of the dedicated subwoofer channel.
  • Input Selector Switch (Main/DVD): Toggles between the main audio input and the DVD/auxiliary input.
  • Equalization Knobs (Bass, Mid-Bass, Mid, Mid-High, High): Each knob controls the gain or cut for its respective frequency band. Adjust these to shape the audio to your preference.
  • Crossover Switch (43Hz-60Hz): Selects the low-pass crossover frequency for the subwoofer output.

Adjusting Audio:

Start with all equalization knobs at their center (flat) position. Play a familiar piece of music and adjust each frequency band incrementally to achieve the desired sound. The blue illumination indicates the unit is powered on.

Maintenance

The Quantum 5-Band Equalizer is designed for durability and requires minimal maintenance.

  • Cleaning: Use a soft, dry cloth to wipe the exterior of the unit. Avoid using harsh chemicals or abrasive cleaners.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
  • Environment: Ensure the unit remains in a dry, well-ventilated area, free from extreme temperatures.

Troubleshooting

If you encounter issues with your Quantum 5-Band Equalizer, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No power / Blue illumination offBlown fuse, loose power connection, no remote signal.Check inline fuse, verify +12V, GND, and REM connections. Ensure head unit is on.
No audio outputIncorrect RCA connections, input selector wrong, amplifier off.Verify all RCA cables are securely connected. Check Main/DVD selector. Ensure amplifier is powered on.
Distorted soundInput signal too high, equalization settings too extreme.Reduce head unit volume. Adjust equalization knobs to a less extreme setting.
Humming or buzzing noiseGround loop, poor RCA shielding, power cable interference.Ensure proper grounding. Use high-quality shielded RCA cables. Route power cables away from audio cables.

If the problem persists after attempting these solutions, contact Quantum customer support or a qualified car audio technician.

Specifications

FeatureDetail
Model NumberQEQ5
Equalization Bands5-Band Stereo
Max Output VoltageUp to 8 Volts
Input ConnectorsGold Plated RCA
Subwoofer CrossoverSelectable 43Hz-60Hz
Dimensions (L x W x H)22.86 x 19.69 x 5.72 cm (9 x 7.75 x 2.25 inches)
Weight499 g (1.1 lbs)

Warranty and Support

For warranty information and technical support, please refer to the official Quantum website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.

Online Resources: www.quantum-audio.com

© 2024 Quantum. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.