Numark Mixtrack Pro DJ Controller

Introduction

The Numark Mixtrack Pro is a comprehensive DJ system designed for use with music on your Mac or PC. This controller features a classic two-turntables-and-a-mixer setup, allowing you to scratch, mix, loop, and perform with ease. It includes all necessary inputs and outputs for headphones, speakers, and a microphone, making it a portable and versatile solution for any DJ. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Mixtrack Pro.

Figure 1: Numark Mixtrack Pro DJ Controller Overview

Setup

1. Package Contents

• Numark Mixtrack Pro DJ Controller
• USB Cable
• Serato DJ Intro Software (download or disc, depending on version)

2. Connecting the Hardware

1. Connect to Computer: Use the supplied USB cable to connect the Mixtrack Pro's USB port to an available USB port on your computer. The Mixtrack Pro is USB-powered and does not require an external power adapter.
2. Connect Audio Output:
   • Connect your main speakers to the RCA outputs on the rear panel of the Mixtrack Pro.
   • Connect your headphones to the 1/4-inch or 1/8-inch headphone output on the front panel for monitoring.
3. Connect Microphone (Optional): If using a microphone, connect it to the 1/4-inch microphone input on the rear panel.

3. Software Installation

The Mixtrack Pro comes with Serato DJ Intro software. Follow these steps to install:

1. Download/Install Serato DJ Intro: If a disc is provided, insert it and follow the on-screen instructions. Otherwise, visit the Serato website to download the latest version of Serato DJ Intro.
2. Install Drivers (if necessary): The Mixtrack Pro is class-compliant for most operating systems, meaning no specific drivers are usually required. However, if prompted, install any necessary drivers provided with the software or from the Numark website.
3. Launch Software: Once installed, launch Serato DJ Intro. The software should automatically detect the Mixtrack Pro.

Operating Instructions

The Mixtrack Pro is designed for intuitive control over your DJ software. Familiarize yourself with the main sections:

1. Deck Controls (Left and Right)

• Jog Wheels: Large, touch-sensitive platters for scratching, nudging, and searching within tracks. (Refer to Figure 1, the large circular controls on either side).
• Pitch Faders: Adjust the tempo of the track. (Refer to Figure 1, the vertical sliders next to each jog wheel).
• Sync Button: Automatically matches the tempo of the current track to the other deck.
• Cue/Play/Pause Buttons: Standard transport controls for each deck.
• Performance Pads: Illuminated pads (red in Figure 1) for triggering cues, loops, samples, and effects.

2. Mixer Section (Center)

• Channel Faders: Control the volume of each deck. (Refer to Figure 1, the two vertical sliders in the center).
• Crossfader: Blends audio between the left and right decks. (Refer to Figure 1, the horizontal slider at the bottom center).
• EQ Knobs: Adjust Bass, Mid, and Treble frequencies for each channel. (Refer to Figure 1, the three knobs above each channel fader).
• Gain/Level Knobs: Adjust the input level for each channel.
• Browse Knob: Navigate through your music library in the software.
• Load Buttons: Load selected tracks to Deck 1 or Deck 2.

3. Effects and Looping

• FX Controls: Knobs and buttons to select and apply various effects (e.g., Flanger, Phaser, Reverb). (Refer to Figure 1, the section above the mixer with "FX" label).
• Loop Controls: Buttons for setting and adjusting loops (e.g., Auto Loop, Loop In/Out, Reloop).

4. Audio Interface Functions

• Headphone Cueing: Use the CUE GAIN and CUE MIX knobs to adjust headphone volume and blend between the master output and the cued track.
• Master Output: The main RCA outputs send the mixed audio to your speakers.
• Microphone Input: Adjust microphone volume using the dedicated MIC GAIN knob.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the controller. For stubborn dirt, a slightly damp cloth can be used, but ensure no liquid enters the device. Avoid abrasive cleaners or solvents.
• Dust Protection: When not in use, cover the controller to prevent dust accumulation, which can affect faders and buttons.
• Storage: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. If transporting, use a protective case.
• Cable Management: Ensure all cables are connected securely but without excessive strain. Avoid sharp bends in cables.

Troubleshooting

• No Sound Output:
  • Check all cable connections (USB, RCA to speakers, headphones).
  • Ensure the master volume knob on the Mixtrack Pro is turned up.
  • Verify that the channel faders and crossfader are correctly positioned.
  • In your DJ software, confirm that the Mixtrack Pro is selected as the audio output device.
  • Check your computer's sound settings to ensure the Mixtrack Pro is recognized and selected as the default audio device if applicable.
• Controller Not Recognized by Software:
  • Ensure the USB cable is securely connected to both the controller and the computer.
  • Try a different USB port on your computer.
  • Restart your computer and the DJ software.
  • Check the Numark website for any updated drivers or firmware for the Mixtrack Pro.
• Latency/Audio Dropouts:
  • Close other applications running on your computer to free up system resources.
  • Adjust the buffer size/latency settings within your DJ software (a higher buffer size can reduce dropouts but increase latency).
  • Ensure your computer meets the minimum system requirements for the DJ software.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the documentation included with your product or visit the official Numark website. The website typically provides the most up-to-date information on product registration, warranty terms, software updates, and contact details for customer service.

Online Resources:

• Numark Official Website: www.numark.com
• Serato DJ Intro Support: serato.com/dj/intro/support