Introduction
This manual provides essential information for the Transformers Hunt for the Decepticons Hasbro Legends Mini Action Figure Prowl. This action figure allows fans to engage in battles between AUTOBOTS and DECEPTICONS, offering both robot and vehicle modes for dynamic play.

Image: The Transformers Legends Mini Action Figure Prowl, still sealed in its original packaging, showcasing the robot mode and "Reveal the Shield" branding.
Setup
Your Prowl action figure comes ready for play. No assembly is required beyond removing it from its packaging.
- Carefully remove the figure from its blister packaging.
- Inspect the figure for any visible damage or missing parts.
- Retain packaging for future reference or storage, if desired.
Operating Instructions
Prowl can transform between robot mode and vehicle mode. The transformation process is designed to be straightforward for this Legends class figure.
Transforming from Robot Mode to Vehicle Mode:
- Position Arms: Fold the robot's arms inward towards the body.
- Adjust Legs: Straighten the legs and bring them together.
- Rotate Torso: Rotate the upper torso or waist as needed to align with the vehicle's front.
- Form Vehicle Shell: Collapse or fold panels to form the vehicle's exterior, ensuring all tabs and slots are securely connected.
- Final Alignment: Ensure all parts are flush and the vehicle mode is compact and stable.
Transforming from Vehicle Mode to Robot Mode:
- Separate Panels: Carefully unclip or unfold the vehicle panels to begin revealing the robot parts.
- Extend Legs: Separate and extend the vehicle's rear section to form the robot's legs.
- Unfold Arms: Unfold the side panels or front section to reveal and extend the robot's arms.
- Reveal Head: Position the head, which may pop up or need to be manually rotated into place.
- Pose: Adjust limbs and joints to achieve desired robot poses.
Always apply gentle pressure during transformation to avoid damaging the figure's joints or plastic components.
Maintenance
Proper care will ensure the longevity of your Prowl action figure.
- Cleaning: Wipe the figure with a soft, dry cloth to remove dust. For stubborn dirt, use a slightly damp cloth and dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the figure away from direct sunlight and extreme temperatures to prevent discoloration or warping of plastic.
- Handling: Handle the figure by its main body parts rather than small, delicate accessories or thin joints.
Troubleshooting
If you encounter any issues with your Prowl figure, consider the following:
- Stiff Joints: If a joint is stiff, gently work it back and forth. Do not force it, as this may cause breakage.
- Transformation Difficulty: Refer to the operating instructions. Ensure all parts are aligned correctly and tabs are fully engaged or disengaged.
- Loose Parts: Small parts may become loose over time. If a part detaches, check if it can be reattached securely. For persistent issues, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 7 x 4.25 x 1.5 inches |
| Item Weight | 0.32 ounces |
| ASIN | B0045WKBLM |
| Item Model Number | 653569565376 |
| Manufacturer Recommended Age | 4 years and up |
| Manufacturer | Hasbro Toys |
Warranty and Support
This product is manufactured by Hasbro Toys. For any inquiries regarding product defects, missing parts, or general support, please refer to the manufacturer's official website or contact their customer service department.
Specific warranty details may vary by region and retailer. Please retain your proof of purchase for any warranty claims.
For more information, you may visit the official Transformers store: Transformers Store on Amazon.





