Lasko 5586 Digital Ceramic Tower Heater User Manual

1. Introduction

Thank you for choosing the Lasko 5586 Digital Ceramic Tower Heater. This manual provides important information for the proper setup, operation, and maintenance of your new heater. Please read it thoroughly before use and keep it for future reference.

The Lasko 5586 is designed to provide efficient and comforting warmth with its 1500 watts of power, elongated heating element, and penetrating air velocity. It features simple electronic controls, a digital display, two quiet settings (high and low heat), an intelligent thermostat for auto mode, and an 8-hour auto-off timer. For added convenience, a multi-function remote control is included and can be stored onboard. Built-in safety features such as a self-regulating ceramic element, overheat protection, and cool-touch housing ensure safe operation.

2. Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.

• Read all instructions before using this heater.
• Do not use this heater in bathrooms, laundry areas, or similar indoor locations where water is present.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating unattended.
• Always unplug heater when not in use.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area where it will not be tripped over.
• This heater has overheat protection. If the heater overheats, it will automatically shut off.
• The exterior of the heater remains cool to the touch during operation.

For comprehensive safety guidelines, please refer to the full user manual PDF provided by the manufacturer.

3. Package Contents

Please check the box for the following items:

• Lasko 5586 Digital Ceramic Tower Heater
• Heater Base (2 halves)
• Hardware (screws)
• Multi-function Remote Control (requires 2 AAA batteries, not included)
• User Manual
• Warranty Information

4. Setup

Assembling the Base

The Lasko 5586 heater requires minimal assembly to attach its sturdy base. Follow these steps:

1. Connect the two halves of the base together. Ensure they fit snugly.
2. Secure the two base halves using the two smaller screws provided.
3. Carefully lay the main heater unit on its side.
4. Pull the power cord through the designated hole in the assembled base.
5. Flip the main unit upside-down. While stabilizing it with one hand, attach the base. Spin the base until it clicks securely into place.
6. Secure the base to the main unit using the four longer screws.
7. Route the power cable through the two plastic clips on the base for cable management.

Image: The Lasko 5586 heater with its base detached, illustrating the two halves of the base and the power cord for assembly.

5. Operating Instructions

Controls and Display

The Lasko 5586 features intuitive electronic controls located on the top panel, along with a clear digital display. All functions can also be controlled via the included remote.

Image: A detailed view of the Lasko 5586 heater's control panel and its remote, pointing out key features like oscillation, comfort settings, and thermostatic control.

Powering On/Off and Heat Settings

• Power: Press the POWER button to turn the heater on or off. A red LED light indicates when the unit is plugged in.
• Heat Settings: The heater offers two quiet settings: HIGH HEAT (1500W) and LOW HEAT. Select your desired heat level using the appropriate button on the control panel or remote.
• Adjustable Thermostat: Use the + and - buttons to set your preferred temperature. The heater will automatically maintain this temperature, turning on and off as needed.

Oscillation and Timer

• Widespread Oscillation: Press the OSC button to activate or deactivate the widespread oscillation feature, which evenly distributes warmth across the room.
• 8-Hour Auto-Off Timer: The timer function allows you to program the heater to automatically turn off after a set period, from 1 to 8 hours, in 1-hour intervals. Press the TIMER button repeatedly to cycle through the desired duration.

Remote Control

The multi-function remote control provides convenient operation from a distance. It allows you to turn the heater on/off, adjust temperature, set the timer, and control oscillation. The remote can be stored in a dedicated slot on the back of the heater.

Image: The remote control for the Lasko 5586 heater, displaying its various function buttons.

Product Demonstrations

Watch these videos for a visual guide on operating your Lasko heater and understanding its features:

6. Maintenance

Proper maintenance ensures the longevity and efficient operation of your Lasko heater. Always unplug the heater before cleaning or performing any maintenance.

• Cleaning: Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use cleaning sprays, harsh chemicals, or abrasives.
• Dust Removal: Periodically vacuum the air intake and exhaust grilles to remove dust and lint buildup. This helps maintain airflow and prevents overheating.
• Storage: When not in use, store the heater in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.

For detailed cleaning instructions, please refer to the full user manual PDF.

7. Troubleshooting

If your Lasko 5586 heater is not operating as expected, please consult the following common issues and solutions:

• Heater does not turn on:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Check if the outlet is receiving power by plugging in another appliance.
  • Verify that the heater's power button is pressed.
  • If the heater has been running and suddenly stops, it might have activated the overheat protection. Unplug the unit, wait 10 minutes for it to cool down, and then plug it back in.
  • Some users have reported issues with the power button not responding after some time. Try unplugging the unit for a few minutes and then plugging it back into a different outlet to reset it.
• No heat output:
  • Ensure the heat setting is selected (High or Low) and the thermostat is set to a temperature higher than the current room temperature.
  • Check for any obstructions around the air intake or exhaust grilles.
• Unusual noise:
  • Ensure the heater is placed on a stable, flat surface.
  • Check for any foreign objects that may have fallen into the grilles.

For more detailed troubleshooting steps, please refer to the official user manual PDF.

Troubleshooting Demonstrations

These videos illustrate common issues and potential solutions:

8. Specifications

9. Warranty and Support

The Lasko 5586 Digital Ceramic Tower Heater comes with a 3-year limited warranty. This warranty covers defects in material or workmanship under normal use and service.

For warranty claims, technical support, or any questions regarding your product, please contact Lasko customer service. Refer to the official user manual for contact details or visit the Lasko website.

You can also download the full user manual in PDF format here: Lasko 5586 User Manual (PDF)