Suncast 175 ft. Wicker Style Resin Hose Hideaway with Hose Guide

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Suncast 175 ft. Wicker Style Resin Hose Hideaway. Designed to keep your outdoor area organized and clutter-free, this hose reel offers a convenient and aesthetically pleasing solution for storing your garden hose.

Key features of your hose hideaway include:

• Outdoor Garden Hose Reel: Features a wicker style java exterior for a stylish and functional addition to your yard.
• Includes Slide Trak Hose Guide: Makes winding and unwinding of the garden hose easy and kink-free with the help of the crank handle.
• Tight Seal: A strong, reinforced system ensures water-tight connection between reel and hose.
• Durable Construction: Sturdy resin construction is resistant to fading, durable, and easy to maintain.
• Ideal Size: Measures 23" x 23" x 18" to keep your yard organized without taking up too much space.

2. Setup Instructions

Follow these steps to properly set up your Suncast Hose Hideaway:

1. Unpack Contents: Carefully remove all components from the packaging. Ensure all parts are present and undamaged.
2. Position the Unit: Place the hose hideaway on a flat, stable surface in your desired outdoor location. For optimal stability, especially on uneven ground, utilize the two metal rods (stakes) provided. Insert these into the designated holes at the bottom rear of the unit and push them into the ground.
3. Connect to Water Source: Attach the short leader hose (included) to your outdoor water spigot. Ensure a tight connection to prevent leaks.
4. Connect to Hose Hideaway: Connect the other end of the leader hose to the inlet connection on the side of the hose hideaway. Hand-tighten the connection.
5. Install Garden Hose: Feed your garden hose into the hose hideaway and connect it to the internal reel mechanism. Ensure the connection is secure and watertight. Important: When connecting the hose to the internal mechanism, ensure both the connector piece and the hose itself are turned to achieve a proper seal and prevent leaks.

Figure 1: The Suncast Hose Hideaway blends seamlessly into your outdoor environment, providing a discreet and organized solution for hose storage.

3. Operating Instructions

Using your Suncast Hose Hideaway is straightforward:

1. Unwinding the Hose: To extend the garden hose, simply pull the hose from the opening. The Slide Trak Hose Guide will automatically adjust to ensure a smooth release.
2. Winding the Hose: After use, ensure the water supply is turned off and the hose is drained. Begin turning the crank handle located on the side of the unit. The Slide Trak Hose Guide will move back and forth, evenly distributing the hose onto the reel and preventing kinks.

Figure 2: The integrated Slide Trak Hose Guide ensures smooth and even winding of the hose onto the reel, preventing kinks and tangles.

Figure 3: The spacious interior accommodates up to 175 feet of standard 5/8-inch vinyl garden hose, keeping it fully concealed and your landscape uncluttered.

4. Maintenance

To ensure the longevity and optimal performance of your hose hideaway:

• Cleaning: The resin construction is easy to clean. Wipe down the exterior with a damp cloth and mild soap as needed. Avoid harsh chemicals that may damage the finish.
• Winter Storage: In colder climates, it is recommended to drain the hose completely and store the unit indoors during winter months to prevent damage from freezing water.
• Inspect Connections: Periodically check all hose connections for tightness to prevent leaks.

Figure 4: Constructed from sturdy resin, the hose hideaway is designed for durability and weather resistance, maintaining its appearance through various seasons.

Figure 5: A reinforced system provides a watertight connection between the hose reel and your garden hose, minimizing leaks.

5. Troubleshooting

• Leaks at Connections: If you experience leaks, ensure all hose connections (to the spigot, to the hideaway inlet, and to the internal reel) are securely tightened. Sometimes, turning both the connector and the hose itself can help achieve a better seal.
• Hose Kinking/Tangling: While the Slide Trak guide is designed to minimize this, ensure the hose is relatively straight before winding. If kinking persists, check the hose for any internal damage or if it's exceeding the recommended capacity.
• Unit Instability: If the unit wobbles or shifts during use, ensure it is placed on a level surface. If provided, use the metal ground stakes by inserting them into the holes at the bottom rear of the unit to secure it.
• Crank Handle Difficulty: If the crank handle is stiff or difficult to turn, check for any obstructions in the hose path or if the hose is improperly wound. Ensure the hose is not excessively tight on the reel.

6. Specifications

7. Warranty and Support

For warranty information, product support, or to order replacement parts, please refer to the contact details provided on the product packaging or visit the official Suncast website. Keep your purchase receipt for warranty claims.