Franke MHX720-36

Download PDF
Contents

Franke MHX720-36 Manor House 36-Inch Equal Double Bowl Apron-Front Kitchen Sink User Manual

Model: MHX720-36

1. Introduction

This manual provides essential information for the safe and efficient use, installation, and maintenance of your Franke MHX720-36 Manor House 36-Inch Equal Double Bowl Apron-Front Kitchen Sink. Designed for durability and functionality, this commercial-grade stainless steel sink is a robust addition to any kitchen.

Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Safety Information

Observe the following safety precautions during installation and use to prevent injury or damage to the product.

  • Always wear appropriate personal protective equipment (PPE) such as safety glasses and gloves during installation.
  • The sink is heavy (approximately 50 pounds). Use proper lifting techniques or seek assistance to prevent back injury.
  • Ensure all plumbing connections are secure and leak-free to prevent water damage.
  • Do not use abrasive cleaners or tools that could scratch the stainless steel surface.
  • Keep children away from the installation area.

3. Product Overview

The Franke MHX720-36 Manor House sink is a 36-inch equal double bowl apron-front kitchen sink crafted from commercial-grade stainless steel. Its design is reminiscent of traditional butler's pantry sinks, offering both aesthetic appeal and high functionality.

Franke MHX720-36 Manor House 36-Inch Equal Double Bowl Apron-Front Kitchen Sink, top-down view.

This image displays the Franke MHX720-36 Manor House kitchen sink, featuring two equally sized bowls made from commercial-grade stainless steel. Each bowl includes a central drain opening. The sink has an apron-front design, visible along the bottom edge of the image.

Key Features:

  • Commercial-grade stainless steel construction for durability.
  • Equal double bowl design for versatile use.
  • Apron-front (farmhouse) style for a distinctive look.
  • Brushed finish.

4. Setup and Installation

4.1 Pre-Installation Checklist

  • Verify all components are present and undamaged.
  • Ensure you have all necessary tools for plumbing and carpentry.
  • Confirm compliance with local plumbing codes.

4.2 Installation Requirements

  • A 36-inch Base Cabinet is required for proper installation.
  • Deduct 9 3/16 inches from the cabinet height to allow the apron to fit properly.
  • Sufficient clearance for plumbing connections and drain lines.

4.3 Installation Steps (General Guide)

Installation of an apron-front sink typically involves custom cabinet modifications. It is highly recommended that installation be performed by a qualified professional.

  1. Prepare the Cabinet: Modify the base cabinet to accommodate the apron front of the sink. This usually involves cutting out the front panel and reinforcing the cabinet structure.
  2. Create Template: Use the sink itself or a provided template to mark the countertop cutout area.
  3. Install Sink: Carefully lift and position the sink into the prepared cabinet opening. Ensure it is level and properly supported.
  4. Secure Sink: Use appropriate mounting clips or supports to secure the sink to the cabinet and/or countertop.
  5. Install Countertop: Place the countertop over the sink, ensuring a tight and sealed fit.
  6. Connect Plumbing: Install drain assemblies, garbage disposal (if applicable), and connect to the household plumbing system.
  7. Test for Leaks: Run water into the sink and check all connections for leaks.

5. Operating Instructions

The Franke MHX720-36 sink operates like any standard kitchen sink. Water flows from your faucet into the bowls, and drains through the grid-type drain openings at the bottom of each bowl. Ensure drain stoppers are properly seated to hold water, and removed for drainage.

For optimal performance, avoid pouring harsh chemicals or excessively hot liquids directly into the sink, as this may affect the finish or plumbing over time.

6. Maintenance and Care

6.1 Daily Cleaning

To maintain the appearance of your stainless steel sink, it is recommended to wipe it with a dry cloth after each use. This helps prevent water spots and mineral buildup.

  • Use a soft cloth or sponge with mild dish soap and warm water for general cleaning.
  • Rinse thoroughly with clean water.
  • Dry the sink completely to prevent water spots, especially in hard water areas.

6.2 Preventing Damage

  • Avoid using abrasive cleaners, steel wool, or scouring pads, as these can scratch the brushed finish.
  • Do not leave acidic foods (e.g., citrus juices, vinegar) or harsh chemicals in contact with the sink surface for extended periods.
  • Prevent heavy or sharp objects from falling into the sink to avoid dents or scratches.
  • Consider using a sink grid to protect the bottom of the bowls from scratches and impacts.

7. Troubleshooting

This section addresses common issues you might encounter with your kitchen sink.

ProblemPossible CauseSolution
Water spots/StainsHard water minerals, food residueWipe dry after each use. Use a stainless steel cleaner for stubborn spots.
Slow drainageClogged drain, food particlesClear drain stopper. Use a plunger or a mild drain cleaner. Avoid pouring grease down the drain.
Scratches on surfaceAbrasive cleaning, sharp objectsUse non-abrasive cleaners and soft cloths. Minor scratches may be buffed out with specialized stainless steel scratch removal kits.
Dull finishLack of regular cleaning, residue buildupClean regularly with mild soap and water, then dry thoroughly. Use a stainless steel polish to restore luster.

8. Specifications

Detailed specifications for the Franke MHX720-36 Manor House Kitchen Sink:

FeatureDetail
BrandFranke
Model NumberMHX720-36
MaterialStainless Steel
ColorStainless Steel
Installation TypeFarmhouse-Apron-Front
Finish TypeBrushed
ShapeRectangular
Drain TypeGrid
Item Weight50 Pounds
Product Dimensions (L x W x H)36 x 21 x 9 inches
Required Base Cabinet Size36 inches
Apron Fit Deduction9 3/16 inches from cabinet height
Product Care InstructionsWipe with Dry Cloth
UPC700621611097, 039487151301

9. Warranty and Support

Franke products are manufactured to high-quality standards and are backed by a manufacturer's warranty against defects in materials and workmanship. Specific warranty terms and duration may vary. Please refer to the warranty documentation provided with your purchase or visit the official Franke website for detailed information.

For technical assistance, replacement parts, or warranty claims, please contact Franke customer support through their official channels. Keep your proof of purchase handy when contacting support.

© 2023 Franke. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.