Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Kichler 5-Light Vanity Light, Model 625NI. This 30-inch brushed nickel fixture is designed for use in bathrooms and powder rooms, offering a transitional style with a classic finish. It accommodates five medium base bulbs, up to 60 watts each (bulbs not included).
Image: Kichler 5-Light Vanity Light in Brushed Nickel, front view. This image shows the Kichler 5-Light Vanity Light, Model 625NI, featuring a brushed nickel finish and five bulb sockets.
Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries. Always follow local electrical codes.
- WARNING: To avoid electric shock, turn off power at the circuit breaker or fuse box before installation or servicing.
- Consult a qualified electrician if you are unsure about the installation process.
- Use only bulbs of the specified type and wattage (E26 medium base, max 60W each). Exceeding the maximum wattage may cause overheating and damage to the fixture.
- This fixture is rated for indoor, dry locations only. Do not install in areas exposed to direct water spray or excessive moisture.
- Wear safety glasses during installation.
Package Contents
Verify that all components are present before beginning installation:
- Kichler 5-Light Vanity Light Fixture (Model 625NI)
- Mounting Hardware Kit
- Instruction Manual
Note: Light bulbs are not included and must be purchased separately.
Setup (Installation)
Follow these steps to properly install your vanity light fixture:
Tools Required:
- Phillips Head Screwdriver
- Wire Strippers
- Electrical Tape
- Safety Glasses
Installation Steps:
- Step 1: Prepare for Installation
Turn off the electrical power at the main circuit breaker or fuse box. Unpack the fixture and its components carefully. Inspect for any damage. - Step 2: Mount the Fixture
Attach the mounting bracket (included in hardware kit) to the electrical junction box in your wall using the provided screws. Ensure the bracket is securely fastened. Connect the fixture's electrical wires to your household wiring: connect the black wire from the fixture to the black (hot) wire from the wall, the white wire from the fixture to the white (neutral) wire from the wall, and the ground wire from the fixture to the bare copper or green ground wire from the wall. Secure connections with wire nuts and electrical tape. Carefully tuck all wires into the junction box. Align the fixture with the mounting bracket and secure it in place with the decorative nuts or screws provided. - Step 3: Install Bulbs
Screw five E26 medium base bulbs (max 60W each) into the sockets. Do not overtighten. - Step 4: Restore Power
Once the fixture is securely installed and bulbs are in place, restore power at the circuit breaker. Test the light fixture.
Operating
The Kichler 5-Light Vanity Light operates via a standard wall switch. If you wish to utilize a dimming function, ensure you use dimmable E26 medium base bulbs and a compatible dimmer switch (sold separately).
Maintenance
Proper maintenance will ensure the longevity and appearance of your vanity light.
Cleaning:
- Always turn off power to the fixture before cleaning.
- Wipe the fixture with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
Bulb Replacement:
- Turn off power to the fixture at the circuit breaker.
- Allow bulbs to cool completely before touching them.
- Carefully unscrew the old bulb from its socket.
- Screw in a new E26 medium base bulb, ensuring it does not exceed 60 watts.
- Restore power at the circuit breaker.
Troubleshooting
If you encounter issues with your vanity light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. Faulty bulb. | Check circuit breaker or fuse. Ensure all wiring connections are secure (turn off power first). Replace bulb with a known working one. |
| Light flickers. | Loose bulb. Incompatible dimmer switch or non-dimmable bulbs. Loose wiring. | Tighten bulb. Ensure dimmable bulbs are used with a compatible dimmer switch. Check wiring connections (turn off power first). |
| Fixture is hot to the touch. | Bulb wattage exceeds maximum rating. | Replace bulbs with ones that do not exceed 60 watts per socket. |
Specifications
| Brand | Kichler |
| Model Number | 625NI |
| Color/Finish | Brushed Nickel |
| Material | Metal |
| Dimensions (L x W x H) | 30" x 2" x 4.25" |
| Item Weight | 2.9 pounds |
| Number of Light Sources | 5 |
| Bulb Base | E26 Medium |
| Max Wattage per Bulb | 60 Watts |
| Voltage | 120V AC |
| Indoor/Outdoor Usage | Indoor |
| Room Type | Bathroom |
| Mounting Type | Wall Mount, Surface-Mounted |
| Water Resistance Level | Moisture Resistant (UL rated for dry locations) |
| Dimmable | Yes (with compatible dimmer switch and bulbs) |
| UPC | 783927029780 |
Warranty
This Kichler vanity light fixture is covered by a 1-year limited manufacturer warranty. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact Kichler customer service.
Support
For technical assistance, replacement parts, or any questions regarding your Kichler 5-Light Vanity Light, please contact Kichler customer service. You can find up-to-date contact information and support resources on the official Kichler website:
