Acctim Auric 12342 Superbrite Crescendo Digital Alarm Clock User Manual

Introduction

Thank you for purchasing the Acctim Auric 12342 Superbrite Crescendo Digital Alarm Clock. This manual provides detailed instructions for the setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use and retain it for future reference.

Important Safety Information

Do not expose the unit to extreme temperatures, direct sunlight, or high humidity.
Avoid dropping or subjecting the unit to strong impacts.
Do not attempt to disassemble or modify the unit. This will void the warranty.
Use only the specified battery type (2 x AA batteries).
Dispose of old batteries responsibly according to local regulations.
Keep out of reach of children.

Package Contents

Acctim Auric 12342 Digital Alarm Clock
User Manual (this document)

Note: 2 x AA batteries are required and are not included in the package.

Product Features

Front view of Acctim Auric 12342 digital alarm clock with large LCD display

Image 1: Front view of the Acctim Auric 12342 digital alarm clock, showcasing its large LCD display and compact design.

Large digit LCD display
Battery operated for portability
Superbrite blue backlight for clear visibility
Crescendo alarm with increasing volume
Snooze function
Elegant design
AM/PM indicator

Product Overview

Familiarize yourself with the alarm clock's components before operation.

Top view of Acctim Auric 12342 alarm clock showing buttons and dimensions

Image 2: Top view of the Acctim Auric 12342 alarm clock, illustrating the control buttons and approximate dimensions. The large button at the top is for SNOOZE/LIGHT. Below it are the MIN and HR buttons for setting time and alarm. A slider switch is visible for selecting Time Set (T.SET), Alarm Set (AL.SET), Alarm On (AL.ON), and Alarm Off (AL.OFF) functions.

SNOOZE/LIGHT Button: Activates the backlight and snooze function.
HR Button: Adjusts the hour for time and alarm settings.
MIN Button: Adjusts the minute for time and alarm settings.
Function Slider Switch:
- T.SET: Time Setting mode.
- AL.SET: Alarm Setting mode.
- AL.ON: Alarm On.
- AL.OFF: Alarm Off.
LCD Display: Shows time, AM/PM indicator, and alarm status.

Setup

1. Battery Installation

Locate the battery compartment cover on the back of the alarm clock.
Remove the cover by sliding or lifting it.
Insert 2 new AA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
Replace the battery compartment cover securely.

The clock will power on automatically once batteries are inserted. The display may flash, indicating it's ready for time setting.

Operating Instructions

1. Setting the Time

Slide the Function Switch to the T.SET position. The time digits will start flashing.
Press the HR button repeatedly to set the hour. Observe the AM/PM indicator for correct 12-hour format.
Press the MIN button repeatedly to set the minutes.
Once the desired time is set, slide the Function Switch back to the AL.OFF or AL.ON position to save the time.

2. Setting the Alarm

Slide the Function Switch to the AL.SET position. The alarm time digits will start flashing.
Press the HR button repeatedly to set the alarm hour. Observe the AM/PM indicator.
Press the MIN button repeatedly to set the alarm minutes.
Once the desired alarm time is set, slide the Function Switch back to the AL.ON position to activate the alarm, or AL.OFF to deactivate it.

3. Activating/Deactivating the Alarm

To activate the alarm, slide the Function Switch to the AL.ON position. An alarm icon will appear on the display.
To deactivate the alarm, slide the Function Switch to the AL.OFF position. The alarm icon will disappear.

4. Using the Snooze and Backlight Function

When the alarm sounds, press the large SNOOZE/LIGHT button on top of the clock to temporarily stop the alarm. The alarm will sound again after approximately 4-5 minutes.
To activate the blue backlight at any time, press the large SNOOZE/LIGHT button. The backlight will illuminate for a few seconds.

Maintenance

Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Battery Replacement: When the display dims or the alarm function becomes unreliable, replace both AA batteries with new ones. Follow the battery installation steps in the Setup section.
Storage: If the clock will not be used for an extended period, remove the batteries to prevent leakage.

Troubleshooting

Problem	Possible Cause	Solution
Clock display is blank or dim.	Batteries are low or incorrectly installed.	Replace with new AA batteries, ensuring correct polarity.
Alarm does not sound.	Alarm is not activated (AL.OFF). Alarm time is incorrectly set.	Slide the Function Switch to AL.ON. Check and reset the alarm time.
Time or alarm cannot be set.	Function Switch is not in the correct position.	Ensure the Function Switch is set to T.SET for time or AL.SET for alarm.
Backlight does not work.	Batteries are low.	Replace with new AA batteries.

Specifications

Brand: Acctim
Model Number: 12342
Color: White
Material: Plastic
Display Type: Digital LCD
Power Source: Battery powered (2 x AA batteries, not included)
Product Dimensions (L x W x H): 5.21 x 3.81 x 10.49 cm (approximately 2.05 x 1.5 x 4.13 inches)
Item Weight: 102 grams (approximately 0.22 lbs)
Special Features: Alarm, Snooze, Superbrite Blue Backlight, Crescendo Alarm
Indoor/Outdoor Use: Indoor

Warranty and Support

The Acctim Auric 12342 Digital Alarm Clock comes with a one-year warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any inquiries, please contact Acctim customer service through their official website or the retailer where the product was purchased.

Please retain your proof of purchase for warranty purposes.

	Acctim Juno Smartlite® Alarm Clock 14843 & 14847X Operating Instructions Comprehensive operating instructions for the Acctim Juno Smartlite® alarm clock (models 14843 & 14847X), detailing features, time and alarm setting, backlight, Smartlite® technology, battery care, maintenance, and environmental disposal guidelines.
	Acctim Eclipse Series Smartlite LCD Alarm Clock User Manual User guide for the Acctim Eclipse Series Dual Power Solar Smartlite LCD Alarm Clock, covering setup, time/alarm setting, features, battery replacement, maintenance, and warranty.
	Acctim 71842 Varley RC LCD Alarm Clock: User Manual and Instructions Comprehensive user manual and instructions for the Acctim 71842 Varley Radio Controlled LCD Alarm Clock. Learn how to set the time, alarm, use features, and troubleshoot reception issues.
	Acctim LCD Alarm Clock Operating Instructions User manual for the Acctim LCD Alarm Clock (Model AL5021), providing comprehensive instructions on setup, time and alarm setting, feature usage, battery replacement, maintenance, and warranty information.
	Acctim 74247 Radio Controlled Clock Instruction Manual Comprehensive instruction manual for the Acctim 74247 Radio Controlled Clock, detailing setup, time setting, alarm functions, temperature display, troubleshooting, and maintenance. Features include automatic time adjustment, temperature display, and moon phase.
	Acctim 71851 OTTO RC LCD Alarm Clock - User Manual Comprehensive user manual for the Acctim 71851 OTTO RC LCD Alarm Clock, covering setup, time and alarm settings, battery replacement, MSF signal reception, and maintenance.

Acctim 12342