1. Introduction
This manual provides comprehensive instructions for the AudioQuest Carbon USB A to B High-Definition Audio Cable (0.75m). Designed for superior digital audio transmission, this cable incorporates advanced materials and construction techniques to deliver clear and accurate sound.
Please read this manual thoroughly to understand the features, proper usage, and maintenance of your AudioQuest Carbon USB cable.
Image 1: AudioQuest Carbon USB A to B High-Definition Audio Cable (0.75m).
2. Key Features
- Solid 5% Silver Conductors: Enhances signal conductivity for improved audio clarity.
- Foamed-Polyethylene Insulation: Minimizes signal distortion and preserves signal integrity.
- Carbon-Based 3-Layer Noise-Dissipation System (NDS): Effectively shields against radio-frequency interference (RFI) to reduce noise and improve sound quality.
- USB A to B Connectors: Standard configuration for connecting audio devices with USB Type A and Type B ports.
- 0.75 Meter Length: Provides a convenient length for various audio setups.
3. Setup Instructions
Follow these steps to properly connect your AudioQuest Carbon USB cable:
- Identify Ports: Locate the USB Type A port on your source device (e.g., computer, streamer) and the USB Type B port on your audio device (e.g., DAC, audio interface).
- Connect USB A: Gently insert the USB Type A end of the AudioQuest Carbon cable into the corresponding port on your source device. Ensure it is fully seated.
- Connect USB B: Gently insert the USB Type B end of the AudioQuest Carbon cable into the corresponding port on your audio device. Ensure a firm connection.
- Power On Devices: Once the cable is securely connected, power on your audio devices and source device.
- Driver Installation (if necessary): If your audio device requires specific drivers, install them according to the device manufacturer's instructions.
Note: Always ensure devices are powered off before connecting or disconnecting cables to prevent potential damage.
4. Operating Instructions
The AudioQuest Carbon USB cable is designed for plug-and-play operation once connected. Here are general operating guidelines:
- Source Selection: On your audio device (DAC, amplifier), select the correct USB input source.
- Audio Playback: Begin playing audio from your source device. The signal will be transmitted digitally through the AudioQuest Carbon cable to your audio device.
- Volume Control: Adjust the volume using your audio device's controls or your source device's software.
- Optimal Performance: For best audio quality, ensure your source device is configured to output audio at its native resolution and sample rate, and that your audio device is set to receive it.
5. Maintenance
Proper care will extend the life and performance of your AudioQuest Carbon USB cable:
- Cleaning: Use a soft, dry, lint-free cloth to gently wipe the cable and connectors. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use, store the cable coiled loosely to prevent kinks or damage. Avoid tight bends or knots.
- Handling: Always grasp the connector housing when plugging or unplugging the cable, not the cable itself, to prevent strain on the connections.
- Environment: Keep the cable away from extreme temperatures, direct sunlight, and excessive moisture.
6. Troubleshooting
If you encounter issues with your AudioQuest Carbon USB cable, try the following solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No audio output | Incorrect input selection on audio device; loose connection; driver issue. | Verify correct input is selected. Re-seat both ends of the USB cable. Check device manager for driver status and reinstall if necessary. |
| Intermittent audio | Loose connection; interference; faulty port. | Ensure connections are secure. Move cable away from power cords or other electronics. Try a different USB port. |
| Poor audio quality (static, dropouts) | Interference; damaged cable; incompatible settings. | Check for sources of electromagnetic interference. Inspect cable for visible damage. Verify audio settings (sample rate, bit depth) are compatible with both devices. |
If the problem persists after trying these steps, consult the support section or contact AudioQuest customer service.
7. Specifications
- Brand: AudioQuest
- Model Name: 0.75m Carbon USB A-B
- Item Model Number: 65-089-12
- UPC: 092592086609
- Connector Type: USB Type A to USB Type B
- Cable Type: USB
- Length: 0.75 meters
- Conductors: Solid 5% Silver
- Insulation: Foamed-Polyethylene
- Noise-Dissipation System: Carbon-Based 3-Layer NDS
- Data Transfer Rate: 480 Megabits Per Second (USB 2.0 standard)
- Maximum Voltage: 5 Volts
- Compatible Devices: Computer (Personal Computer), Audio Devices (DACs, etc.)
- Indoor/Outdoor Usage: Indoor
- Color: Black
- Item Weight: 0.01 Ounces (approx. 0.28 grams)
- Product Dimensions: 21 x 15.5 x 4 cm (packaging)
8. Related Product Videos
Monosaudio 4N OFC Copper Type A to Type B HiFi Data Cable
Video 1: This video showcases a Monosaudio 4N OFC Copper Type A to Type B HiFi Data Cable, highlighting its features and design. While not the exact AudioQuest product, it demonstrates a similar product type and connection.
TODN Hifi Usb A to B Cable with OFC Core
Video 2: This video presents a TODN Hifi USB A to B cable, focusing on its OFC core and build quality. It offers a visual reference for the type of cable and its application.
USB A to USB B Cable
Video 3: This video provides a general overview of a USB A to USB B cable, demonstrating its physical characteristics and connection points. It serves as a visual aid for understanding USB cable types.
Audiocrast A53 USB2.0 Cable Type A Male to Type B Male
Video 4: This video showcases an Audiocrast A53 USB 2.0 cable with Type A and Type B male connectors, illustrating its design and how it connects to devices. It provides a visual example of a high-quality USB audio cable.
9. Warranty and Support
Warranty Information:
The AudioQuest Carbon USB A to B High-Definition Audio Cable is backed by a Limited Lifetime Warranty. This non-transferable warranty ensures that AudioQuest cables are precisely manufactured to ensure a high level of reliability. Please retain your proof of purchase for warranty claims.
Customer Support:
For technical assistance, warranty inquiries, or any other support needs, please contact AudioQuest directly:
- Manufacturer: AudioQuest
- Address: 2621 White Rd Irvine, CA 92614, USA
- Telephone: 1 (800) 747-2770