Memorex MI4703

Memorex MI4703 Dual Alarm Clock Radio for iPod and iPhone

Instruction Manual

Introduction

This manual provides comprehensive instructions for the operation and maintenance of your Memorex MI4703 Dual Alarm Clock Radio. This device features a dual alarm system, an integrated docking station for iPod and iPhone, and an FM/AM radio. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.

Important Safety Information

  • Power Source: Use only the specified power adapter. Do not expose the unit to water or moisture.
  • Ventilation: Ensure adequate ventilation. Do not block ventilation openings.
  • Cleaning: Unplug the unit before cleaning. Use a soft, dry cloth. Do not use liquid cleaners.
  • Batteries: For time backup, install 2 AAA batteries (not included). Do not mix old and new batteries or different types of batteries. Remove batteries if the unit is not used for extended periods.
  • Placement: Place the unit on a stable, flat surface. Avoid direct sunlight, heat sources, and excessive dust.
  • Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.

Package Contents

Verify that all items are present in the package:

  • Memorex MI4703 Dual Alarm Clock Radio Unit
  • AC Power Adapter
  • User Manual (this document)

Product Features

  • Dual alarm settings for separate wake-up times.
  • Integrated docking station for iPod and iPhone charging and playback.
  • FM/AM digital radio tuner.
  • Six-option display dimmer for adjustable brightness.
  • Sleep timer and nap functions.
  • Auxiliary input for connecting other audio devices.

Setup

1. Power Connection

Connect the AC power adapter to the DC IN jack on the back of the unit, then plug the adapter into a standard wall outlet. The unit will power on and the display will illuminate.

2. Battery Installation (for Time Backup)

For backup power to maintain time settings during a power outage, install 2 AAA batteries (not included) into the battery compartment located on the bottom of the unit. Ensure correct polarity (+/-) as indicated inside the compartment. These batteries do not power the unit for operation, only for time memory.

3. Initial Time Setting

When first powered on, the time display may flash. To set the time:

  1. Press and hold the TIME SET button until the hour digits flash.
  2. Use the HOUR and MINUTE buttons to adjust the time.
  3. Press TIME SET again to confirm and exit time setting mode.
Memorex MI4703 Dual Alarm Clock Radio with an iPod docked

Image: The Memorex MI4703 Dual Alarm Clock Radio, showcasing its sleek black design and the integrated docking station. An iPod is shown docked in the lay-flat cradle, illustrating how devices are positioned for charging and playback.

Operating Instructions

1. Setting Alarms

The unit features two independent alarms (Alarm 1 and Alarm 2).

  1. Press and hold the ALARM 1 or ALARM 2 button until the alarm time flashes.
  2. Use the HOUR and MINUTE buttons to set the desired alarm time.
  3. Press the corresponding ALARM button again to select the alarm source: Buzzer, Radio, or iPod/iPhone. The selected icon will appear on the display.
  4. Press the ALARM button one more time to confirm and activate the alarm.
  5. To turn off an active alarm, press the corresponding ALARM button. To temporarily silence, press SNOOZE.

2. Using the iPod/iPhone Dock

The integrated dock allows you to play audio from and charge your compatible iPod or iPhone device.

  1. Carefully place your iPod or iPhone onto the docking connector. Ensure it is seated properly. The unique lay-flat design helps protect your device.
  2. The device will begin charging automatically.
  3. Press the MODE button repeatedly until "iPod" or "iPhone" is selected as the audio source.
  4. Use the controls on your device or the unit's VOLUME knob to adjust playback.
  5. To remove your device, gently lift it from the dock.

Note: Some protective cases may prevent proper docking. It may be necessary to remove the case before docking your device.

3. Radio Operation

To listen to the radio:

  1. Press the MODE button repeatedly until "FM" or "AM" is selected.
  2. Use the TUNE + or TUNE - buttons to manually adjust the frequency.
  3. Press and hold TUNE + or TUNE - to automatically scan for the next available station.
  4. To save a station as a preset:
    1. Tune to the desired station.
    2. Press and hold the PRESET button until the preset number flashes.
    3. Use the TUNE + or TUNE - buttons to select the desired preset number (1-10).
    4. Press PRESET again to save.
  5. To recall a preset station, press the PRESET button repeatedly to cycle through saved stations.

4. Display Dimmer

Press the DIMMER button repeatedly to cycle through the six brightness levels of the display. Select the level most comfortable for your environment.

5. Sleep Timer and Nap Function

The sleep timer allows you to fall asleep to music, and the nap function provides a short alarm.

  • Sleep Timer: Press the SLEEP button repeatedly to set the duration (e.g., 90, 60, 30, 15 minutes, or OFF). The unit will automatically turn off after the selected time.
  • Nap Function: Press the NAP button repeatedly to set a short alarm duration (e.g., 10, 20, 30 minutes, or OFF). The buzzer will sound after the selected time.

Maintenance

  • Cleaning: Wipe the unit with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
  • Dust: Keep the docking connector free of dust and debris to ensure proper connection with your device.
  • Battery Replacement: Replace the AAA backup batteries annually or if the time resets frequently during power interruptions.

Troubleshooting

Problem Possible Cause Solution
Unit does not power on. Power adapter not connected or faulty outlet. Ensure AC adapter is securely plugged into the unit and a working wall outlet.
Time resets after power outage. Backup batteries are dead or not installed. Install 2 new AAA batteries or replace existing ones in the battery compartment.
iPod/iPhone not charging or playing. Device not properly docked; protective case interfering; device compatibility issue. Ensure device is firmly seated on the connector. Remove any protective cases. Verify device compatibility with the dock.
Alarm volume is too loud/soft. Alarm volume is fixed and not user-adjustable. This model has a fixed alarm volume. Consider using a different alarm source (e.g., buzzer if radio is too loud).
Radio reception is poor. Antenna not extended; interference. Fully extend the FM wire antenna. Reposition the unit for better reception. Avoid placing near other electronic devices that may cause interference.

Specifications

  • Model: MI4703
  • Power Source: AC 120V ~ 60Hz (via included adapter)
  • Battery Backup: 2 x AAA batteries (not included)
  • Radio Frequencies: FM, AM
  • Features: Dual Alarm, iPod/iPhone Docking, FM/AM Radio, Aux-in, Sleep Timer, Nap Function, Dimmer
  • Dimensions: Approximately 2 lbs (Weight)

Warranty and Support

Memorex products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Memorex website. For technical support or service inquiries, please contact Memorex customer service through their official channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.