1. Introduction
The ALM OL120 is a semi-synthetic low smoke 2-stroke engine oil, specifically formulated for use in various garden machinery. This product is designed to ensure proper lubrication of your engine and simplify the fuel mixing process.
Image 1.1: The ALM OL120 100ml bottle of semi-synthetic low smoke 2-stroke oil. The label indicates it is suitable for 2-stroke engines and features images of a grass trimmer and a chainsaw, highlighting its use in garden machinery.
This manual provides essential information on the proper use, mixing, and general care of the ALM OL120 oil to ensure optimal performance and longevity of your equipment.
2. Setup and Mixing Instructions
The ALM OL120 oil is designed for a precise 50:1 fuel mixture ratio, eliminating guesswork. This ratio is crucial for the correct operation and lubrication of 2-stroke engines.
2.1. Required Materials
- ALM OL120 100ml Low Smoke 2-Stroke Oil bottle
- 5-litre fuel can (clean and suitable for fuel storage)
- Unleaded gasoline (petrol)
2.2. Mixing Procedure
- Ensure the 5-litre fuel can is clean and free from contaminants.
- Carefully pour the entire contents of the 100ml ALM OL120 bottle into the 5-litre fuel can.
- Add 5 litres of unleaded gasoline to the can.
- Securely close the fuel can and gently shake it to ensure the oil and gasoline are thoroughly mixed.
- The mixed fuel is now ready for use in your 2-stroke garden machinery.
Important Safety Note: Always mix fuel in a well-ventilated area, away from open flames or ignition sources. Wear appropriate personal protective equipment, such as gloves and eye protection.
3. Operating Guidelines
Once the fuel mixture is prepared according to the instructions in Section 2, it can be used in compatible 2-stroke garden machinery.
3.1. Compatible Machinery
ALM OL120 oil is specially formulated for a range of 2-stroke garden machinery, including but not limited to:
- Hover Mowers
- Grass Trimmers
- Brushcutters
- Chainsaws
- Hedge Trimmers
- Garden Vacuums
3.2. Fueling Your Equipment
- Ensure your equipment's engine is cool before refueling.
- Carefully pour the pre-mixed fuel into the fuel tank of your 2-stroke machinery. Avoid overfilling.
- Securely close the fuel cap.
- Refer to your specific equipment's instruction manual for starting and operating procedures.
Caution: Never use unmixed gasoline or an incorrect fuel-to-oil ratio in 2-stroke engines, as this can lead to severe engine damage.
4. Maintenance and Storage
Proper storage of the ALM OL120 oil and the mixed fuel is essential for maintaining their quality and ensuring safe operation.
4.1. Oil Storage
- Store the ALM OL120 oil in its original, sealed container in a cool, dry place.
- Keep out of reach of children and pets.
- Avoid prolonged exposure to direct sunlight or extreme temperatures.
4.2. Mixed Fuel Storage
- Store mixed fuel in an approved, clearly labeled fuel can.
- Do not store mixed fuel for extended periods (typically beyond 30 days), as gasoline can degrade and cause engine issues.
- Always store fuel in a well-ventilated area, away from living spaces and ignition sources.
4.3. Engine Maintenance
While the ALM OL120 oil provides excellent lubrication, regular maintenance of your garden machinery is still necessary. Refer to your equipment's manual for specific maintenance schedules, including spark plug checks, air filter cleaning, and general engine inspections.
5. Troubleshooting
Most issues related to 2-stroke engines and fuel are often due to incorrect fuel mixture or old fuel.
5.1. Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine not starting or running poorly | Incorrect fuel-to-oil ratio; old or stale fuel; clogged fuel filter | Drain old fuel, prepare a fresh 50:1 mixture using ALM OL120, and refill. Check/replace fuel filter if necessary. |
| Excessive smoke from exhaust | Too much oil in the mixture; engine running too rich | Ensure the 50:1 ratio is strictly followed (100ml ALM OL120 per 5 litres of gasoline). If using a different oil, verify its recommended ratio. |
| Engine overheating | Insufficient oil in the mixture; engine running too lean | Immediately stop the engine. Drain fuel and prepare a fresh, accurate 50:1 mixture. Ensure cooling fins are clean. |
If problems persist after troubleshooting, consult a qualified service technician or refer to your equipment's specific service manual.
6. Specifications
Key specifications for the ALM OL120 100ml Low Smoke 2-Stroke Oil:
- Model Number: OL120
- Part Number: 6041-1
- Type: Semi Synthetic Low Smoke 2-Stroke Oil
- Volume: 100ml (designed for 5 litres of fuel)
- Recommended Mixture Ratio: 50:1 (Oil:Gasoline)
- Item Weight: Approximately 3.67 ounces (104 grams)
- Product Dimensions: Approximately 1.97 x 1.97 x 3.94 inches (5 x 5 x 10 cm)
- Manufacturer: Curtis Holt NW
- Date First Available: May 10, 2012
7. Warranty and Support
For specific warranty information regarding the ALM OL120 100ml Low Smoke 2-Stroke Oil, please refer to the product packaging or contact the retailer from whom the product was purchased. Warranty terms and conditions are typically provided by the manufacturer or seller at the point of sale.
For technical support or further inquiries about the ALM OL120 oil, it is recommended to contact ALM directly through their official website or customer service channels. Please have your product details, including the model number (OL120), ready when contacting support.
