Klipsch RC-62 II

Klipsch RC-62 II Center Speaker Instruction Manual

Introduction

Welcome to the Klipsch RC-62 II Center Speaker instruction manual. This document provides essential information for the proper setup, operation, and maintenance of your Klipsch RC-62 II center channel speaker. The Klipsch RC-62 II is designed to deliver clear and powerful audio for home theater systems, enhancing dialogue and central sound effects.

Product Features

  • High-performance center channel design.
  • Provides realistic and balanced sound reproduction for home theater environments.
  • Efficient design for optimal audio output with reduced power consumption.
  • Magnetically shielded drivers minimize interference with television displays.
  • Equipped with an enhanced 1-inch titanium horn-loaded tweeter and dual 6.5-inch high-output woofers.

Package Contents

The Klipsch RC-62 II Center Speaker package typically includes:

  • One (1) Klipsch RC-62 II Center Speaker
  • Tiltable feet
  • User Manual (this document)

Setup

Placement

For optimal performance, position the Klipsch RC-62 II center speaker directly above or below your television screen, centered horizontally. Ensure the speaker is placed on a stable, level surface. The included tiltable feet can be used to angle the speaker slightly upwards or downwards to direct sound towards the primary listening area.

Klipsch RC-62 II Center Speaker, front view

Figure 1: Front view of the Klipsch RC-62 II Center Speaker. This image shows the speaker's two copper-colored woofers and the central horn-loaded tweeter, all housed within a black woodgrain cabinet.

Connections

Connect the speaker to your audio receiver's center channel output using high-quality speaker wire. Ensure correct polarity (positive to positive, negative to negative) for all connections. Refer to your receiver's manual for specific wiring instructions.

Operating Instructions

Once connected, power on your audio receiver and select the appropriate input. Adjust the volume on your receiver. The Klipsch RC-62 II is designed to integrate seamlessly into a 5.1 surround sound configuration. For detailed audio calibration, consult your audio receiver's user manual for optimal sound settings.

Maintenance

To maintain the appearance and performance of your speaker, follow these guidelines:

  • Cleaning: Gently wipe the cabinet with a dry, soft cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals.
  • Grille Care: The speaker grille can be carefully removed for cleaning. Use a soft brush or a vacuum cleaner with a brush attachment to remove dust and debris.
  • Environmental Conditions: Avoid exposing the speaker to extreme temperatures, high humidity, or direct sunlight, as these can affect its longevity and performance.

Troubleshooting

No Sound

  • Verify all speaker wire connections are secure and correctly polarized (positive to positive, negative to negative).
  • Ensure your audio receiver is powered on and the correct input source is selected.
  • Check the volume level on your receiver and ensure it is not muted.

Distorted Sound

  • Reduce the volume level on your receiver to prevent overdriving the speaker.
  • Check for loose or frayed speaker wire connections at both the speaker and the receiver.
  • Ensure the speaker is not placed too close to other electronic devices that may cause electromagnetic interference.

Uneven Sound or Poor Dialogue Clarity

  • Confirm the speaker is centered horizontally relative to your primary listening position.
  • Check your receiver's balance and center channel level settings. Adjust as needed to achieve balanced sound.

Specifications

Klipsch RC-62 II Center Speaker with dimensions

Figure 2: Dimensions of the Klipsch RC-62 II Center Speaker, showing a depth of 12.8 inches, width of 23.5 inches, and height of 8 inches.

FeatureDetail
Model NameRC-62 II
Speaker TypeCenter Channel
Mounting TypeShelf Mount
Product Dimensions (D x W x H)12.8" x 23.5" x 8"
Item Weight14 Kilograms (30.8 pounds)
Impedance8 Ohm
Speaker Maximum Output Power150 Watts
Woofer Diameter6.5 Inches (Dual)
Tweeter Type1-inch Titanium Horn-Loaded
Connectivity TechnologyWired
ColorBlack
Included ComponentsSpeaker, Tiltable Feet
ManufacturerKlipsch
Item Model Number1011863
UPC743878021943

Warranty and Support

This Klipsch product comes with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Klipsch website. For technical support or service inquiries, please contact Klipsch customer service through their official channels.

Manufacturer: Klipsch
Model: RC-62 II
Item Model Number: 1011863
UPC: 743878021943

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.