Introduction
This manual provides instructions for the Mad Catz Rock Band 3 Wireless Fender Stratocaster Guitar Controller for Xbox 360. This controller is designed to enhance your Rock Band 3 gaming experience by providing a realistic guitar interface. It features wireless connectivity, improved fret buttons, and an advanced Overdrive deployment system.
Image: The Mad Catz Rock Band 3 Wireless Fender Stratocaster Guitar Controller, featuring a black body, white pickguard, and a light-colored neck with fret buttons.
Setup
- Battery Installation: The controller requires 3 AA Alkaline batteries (included). Locate the battery compartment on the back of the guitar body, open it, insert the batteries according to the polarity indicators, and close the compartment securely.
- Wireless Connection to Xbox 360:
- Ensure your Xbox 360 console is powered on.
- Press and hold the guide button on the guitar controller until it powers on.
- Press the connect button on the Xbox 360 console.
- Within 20 seconds, press the connect button on the guitar controller. The lights around the Xbox Guide button on the controller will flash and then remain solid, indicating a successful connection.
- Auto-Calibration: The controller features an auto-calibration sensor for accurate synchronization with your TV. Follow the on-screen prompts within the Rock Band 3 game to utilize this feature for optimal gameplay timing.
Operating Instructions
Basic Controls
- Fret Buttons: Located on the neck, these buttons correspond to the colored notes on screen. The improved design offers faster, quieter action for a more authentic feel.
- Strum Bar: Use the strum bar to register notes as they pass the strum line on screen. The improved design offers greater precision.
- Whammy Bar: Manipulate sustained notes for expressive effects.
- Tilt Sensor for Overdrive: Tilt the guitar upwards to activate Overdrive when your meter is full.
Advanced Features
- Extra Fret Buttons: An additional set of fret buttons is located on the base of the neck, allowing for finger tapping solos without needing to use the strum bar.
Image: A close-up view of the fretboard, highlighting the colored fret buttons and the additional set of buttons for finger tapping.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the controller. Avoid using abrasive cleaners or solvents.
- Battery Replacement: When the controller's performance degrades or it fails to power on, replace the 3 AA Alkaline batteries with new ones. Dispose of old batteries responsibly.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
Troubleshooting
- Controller Not Connecting:
- Ensure batteries are correctly installed and have sufficient charge.
- Repeat the wireless connection steps outlined in the "Setup" section.
- Ensure no other wireless devices are causing interference.
- Buttons or Strum Bar Unresponsive:
- Check for any physical obstructions or debris around the buttons or strum bar.
- Replace batteries if they are low.
- Overdrive Activates Unintentionally:
- The tilt sensor is sensitive. Ensure you are holding the controller steadily during gameplay to avoid accidental activation.
Specifications
| Feature | Detail |
|---|---|
| Model Number | RB3985610MA1/02/1 |
| Brand | Mad Catz |
| Compatibility | Xbox 360 |
| Connectivity | Wireless |
| Power Source | 3 AA Alkaline batteries (included) |
| Product Dimensions | 29 x 2.5 x 11 inches |
| Item Weight | 10.6 ounces |
| Release Date | October 15, 2010 |
Image: A close-up view of the guitar controller's headstock, showing the "Fender Stratocaster" branding.
Warranty and Support
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Mad Catz website. Keep your proof of purchase for warranty claims.
