Revlon Luxury Paraffin Bath RVSP3501 Instruction Manual

Introduction

The Revlon Luxury Paraffin Bath is designed to moisturize dry skin and soothe sore hands, feet, or elbows. This manual provides detailed instructions for safe and effective use, helping you achieve soft and rejuvenated skin from the comfort of your home.

Image: The Revlon Luxury Paraffin Bath unit, featuring a white base and a vibrant pink lid.

Important Safety Instructions

• For external use only.
• Read all instructions thoroughly before using this appliance.
• Keep away from water. Do not immerse the unit in water or other liquids.
• Do not operate if the unit or power cord is damaged. Contact customer support for assistance.
• Always test the wax temperature on a small, sensitive area of your skin (e.g., inner wrist) before full immersion to ensure it is comfortable and not too hot.
• Keep out of reach of children and pets.
• Do not use on open wounds, irritated skin, or if you have any medical conditions that may be aggravated by heat or wax treatments. Consult a physician if unsure.

Package Contents

Your Revlon Luxury Paraffin Bath package includes the following items:

• 1 Revlon Luxury Paraffin Bath unit
• 1 Plastic guard (for the bottom of the bath)
• 3 lbs. of rain-scented paraffin wax
• 20 Plastic hand liners
• 2 Thermal mitts

Setup Guide

1. Placement: Place the paraffin bath unit on a stable, flat, and heat-resistant surface. Ensure it is away from water sources and flammable materials.
2. Prepare the Bath: Ensure the unit is unplugged. Place the plastic guard at the bottom of the wax bath. This guard prevents direct contact with the heating element.
3. Add Wax: Break the paraffin wax blocks into smaller, manageable pieces. Carefully place the wax pieces into the bath, ensuring they are evenly distributed over the plastic guard.


Image: Breaking wax blocks and placing them into the bath for melting.

4. Cover the Unit: Place the lid securely on the unit.
5. Power On: Plug the unit into an appropriate electrical outlet. Turn the control dial to the "High" setting to begin melting the wax. The red indicator light will illuminate, indicating the unit is heating.

Note: Wax melting may take approximately 120 minutes for the first use, depending on the amount of wax and ambient temperature. The green power light will remain on when the unit is plugged in.

Operating Instructions

Follow these steps for a relaxing and moisturizing paraffin treatment:

1. Melt the Wax: Allow the wax to fully melt. Once melted, you can adjust the dial to the "Keep Warm" setting if you prefer a lower temperature, or leave it on "High" if the temperature is comfortable.
2. Test Temperature: Before dipping, carefully test the wax temperature on a small, sensitive area of your skin, such as your inner wrist. The wax should feel warm and comfortable, not unpleasantly hot.
3. Dip Application:
   • Slowly dip your hand, foot, or elbow into the melted paraffin wax.
   • Remove it gently and allow the wax to cool slightly and stop dripping.
   • Repeat this dipping process at least 5 times to build up several layers of wax.


Image: Step-by-step guide for dipping, covering, and removing wax.

4. Retain Heat: Immediately after the final dip, place the waxed hand, foot, or elbow into one of the provided plastic liners. Then, place the lined hand, foot, or elbow into a thermal mitt to help retain the heat and maximize the moisturizing benefits.
5. Relax: Keep the mitt on for 15-20 minutes. This allows the warmth to penetrate and the skin to absorb the moisture.
6. Remove Wax: Gently peel off the cooled wax. The wax should come off easily, often in a single piece, revealing soft, smooth, and rejuvenated skin. Discard the used wax or save it for personal reuse if desired.

Official How-To Video

Maintenance

• Cleaning the Unit: After each use, allow the wax to cool and solidify completely. Unplug the unit from the electrical outlet. The plastic guard can be removed for easier cleaning of the bath. Gently remove the solidified wax. Do not use abrasive cleaners, harsh chemicals, or scrubbers, as these can damage the unit. Wipe the interior and exterior with a soft, damp cloth.
• Wax Replacement: Paraffin wax can be reused if only one person is using the bath. However, it is recommended to replace the wax when it becomes discolored, dirty, or when the quantity is insufficient for proper dipping. Wax refills are available for purchase separately.
• Storage: Store the unit in a cool, dry place with the lid securely on to prevent dust accumulation. Ensure the power cord is neatly wrapped and not kinked.

Troubleshooting

• Wax not melting: Ensure the unit is properly plugged into a working electrical outlet and the control dial is set to "High." Allow sufficient time for the wax to melt (up to 2 hours for initial melt). If the issue persists, check the power outlet with another appliance.
• Wax too hot/cold: The unit features a temperature control dial. Adjust the dial to a comfortable setting. Always test the wax temperature on a small skin area before full immersion. If the wax is consistently too hot or cold despite adjustments, contact customer support.
• Skin not soft after use: Ensure you are building up multiple layers of wax (at least 5 dips) and using the thermal mitts for the recommended 15-20 minutes to retain heat and maximize moisture absorption. For best results, apply a moisturizer after peeling off the wax.

Product Specifications

Warranty and Customer Support

For detailed warranty information, product registration, or to contact customer support for any inquiries or issues, please refer to the warranty card or documentation included with your Revlon Luxury Paraffin Bath. You may also visit the official REVLON website for further assistance and contact details.

Please retain your proof of purchase for warranty claims.