Power4Laptops 1621111
Power4Laptops DC Adapter Laptop Car Charger User Manual
Model: 1621111
1. Introduction
This manual provides essential instructions for the safe and effective use of your Power4Laptops DC Adapter Laptop Car Charger. This device is designed to power your laptop or charge its battery directly from a vehicle's cigarette lighter socket. It ensures your laptop remains operational and its battery charged while on the go.
2. Safety Information
- Do not expose the charger to moisture, rain, or extreme temperatures.
- Avoid dropping or subjecting the charger to severe impacts.
- Ensure the car's cigarette lighter socket is clean and free of debris before insertion.
- Do not attempt to disassemble or modify the charger. Refer all servicing to qualified personnel.
- Keep out of reach of children.
- Disconnect the charger from the car socket when not in use or when leaving the vehicle.
- Verify that the charger's output specifications match your laptop's power requirements before connecting.
3. Package Contents
The package should contain the following item:
- 1 x Power4Laptops DC Adapter Laptop Car Charger
4. Product Overview
The Power4Laptops DC Adapter Laptop Car Charger consists of a car cigarette lighter plug, an adapter unit, and a DC output cable with a connector designed for compatible laptops.

Figure 1: Power4Laptops DC Adapter Laptop Car Charger. This image displays the complete car charger unit, including the car cigarette lighter plug, the central adapter block with ventilation, and the output cable terminating in a 5.5mm x 2.5mm DC connector for the laptop.
5. Specifications
| Brand | Power4Laptops |
| Model Number | 1621111 |
| Input Voltage | 12V DC |
| Output Voltage | 19V |
| Output Amperage | 3.42A |
| Wattage | 65.00W |
| Plug Size | 5.5mm X 2.5mm |
| Item Weight | 250 g |
6. Setup Instructions
- Verify Compatibility: Ensure your laptop requires a 19V output and has a 5.5mm x 2.5mm DC input jack.
- Connect to Laptop: Insert the DC output connector of the car charger firmly into your laptop's power input jack.
- Connect to Vehicle: Insert the car cigarette lighter plug into your vehicle's 12V accessory power socket (cigarette lighter socket). Ensure it is fully seated.
- Power Indicator: A small LED indicator on the car plug may illuminate, indicating that the charger is receiving power from the vehicle.
7. Operating Instructions
Once properly connected, the car charger will begin to supply power to your laptop. If your laptop's battery is installed, the charger will automatically charge the battery (if needed) and then maintain its charge. If the laptop is off, the charger will still charge the battery.
- Powering Laptop: The charger provides continuous DC power to operate your laptop.
- Battery Charging: The charger will detect the laptop's battery status and initiate charging if the battery level is low. Once fully charged, it will switch to a maintenance charge mode.
- Disconnection: To disconnect, first remove the car plug from the vehicle's socket, then disconnect the DC connector from your laptop.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the charger. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Coil the cables loosely to prevent damage.
- Inspection: Periodically inspect the cables and connectors for any signs of wear, fraying, or damage. Discontinue use if any damage is observed.
9. Troubleshooting
- Problem: Laptop is not receiving power or charging.
- Solution 1: Ensure the car charger's plug is fully inserted into the vehicle's 12V accessory socket. Check if the indicator light on the car plug is illuminated.
- Solution 2: Verify that the DC connector is securely plugged into your laptop's power input jack.
- Solution 3: Check your vehicle's fuse for the 12V accessory socket. If blown, replace it according to your vehicle's manual.
- Solution 4: Confirm that the charger's specifications (voltage, amperage, plug size) are compatible with your laptop.
- Problem: Charger feels excessively hot.
- Solution 1: Ensure the adapter unit has adequate ventilation and is not covered. Overheating can occur if airflow is restricted.
- Solution 2: Disconnect the charger and allow it to cool down. If the issue persists, discontinue use and contact support.
10. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Power4Laptops website. Keep your proof of purchase for warranty claims.
For further assistance, you may contact Power4Laptops customer service through their official channels.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.