Cal 12V MR-16, 50W Track Fixture Instruction Manual

1. Introduction

Thank you for choosing the Cal 12V MR-16, 50W Track Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new track lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

2. Safety Information

• Electrical Safety: Always disconnect power at the circuit breaker before installing, servicing, or cleaning this fixture. Improper installation can result in electric shock or fire.
• Qualified Installation: Installation should be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
• Bulb Type: Use only 12V MR-16 bulbs with a maximum wattage of 50W. Exceeding the specified wattage can cause overheating and damage to the fixture or create a fire hazard.
• Fixture Compatibility: This fixture is designed for use with HT Three Wire, Once Circuit Track systems. Do not attempt to connect it to incompatible track systems.
• Heat: The fixture and bulb can become hot during operation. Allow sufficient time for cooling before handling.
• Glass Shade: The fixture features a hand-blown glass shade. Handle with care to prevent breakage.

3. Package Contents

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the fixture. Contact your retailer for assistance.

• 1 x Cal 12V MR-16, 50W Track Fixture (Model HT-954-DB/RDS)
• 1 x Hand Blown Glass Shade (pre-installed or separate)

Note: MR-16 bulb is typically sold separately unless specified by your retailer.

4. Setup and Installation

Follow these steps carefully for proper installation:

1. Power Disconnection: Ensure the power to the track lighting circuit is turned OFF at the main circuit breaker before beginning installation.
2. Track Head Insertion: Align the track head adapter with the track slot. Push the adapter into the track and twist it 90 degrees to lock it into place. Ensure the polarity tab on the adapter aligns correctly with the track's polarity groove.
3. Bulb Installation: Carefully insert a 12V MR-16 bulb (max 50W) into the socket of the fixture. Do not touch the glass of the bulb with bare hands; use a clean cloth or gloves to avoid oil residue that can shorten bulb life.
4. Shade Adjustment (if separate): If the glass shade is not pre-installed, carefully attach it to the fixture according to the design. The shade is removable and interchangeable.
5. Aiming: Adjust the direction of the fixture to illuminate the desired area. The fixture typically allows for vertical and horizontal rotation.
6. Power Restoration: Once installation is complete and all connections are secure, restore power at the circuit breaker.

5. Operating Instructions

Operating your Cal track fixture is straightforward:

• Turning On/Off: Use the wall switch connected to your track lighting system to turn the fixture on or off.
• Adjusting Direction: Gently pivot the fixture head to direct light as needed. Avoid excessive force.
• Shade Removal/Interchange: The hand-blown glass shade can be removed for cleaning or replacement. Refer to the design for specific removal instructions, typically involving a twist or clip mechanism.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your track fixture.

• Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. For the glass shade, a mild glass cleaner can be used on a soft cloth, ensuring no liquid enters the electrical components.
• Bulb Replacement: Disconnect power and allow the bulb to cool completely. Carefully remove the old MR-16 bulb and insert a new 12V MR-16 (max 50W) bulb. Avoid touching the new bulb's glass with bare hands.
• Inspection: Periodically inspect the fixture and track for any signs of wear, loose connections, or damage. If any issues are found, disconnect power and consult a qualified electrician.

7. Troubleshooting

If your track fixture is not functioning correctly, refer to the following common issues and solutions:

• Light does not turn on:
  • Check if the power switch is ON.
  • Verify the circuit breaker for the track lighting is not tripped.
  • Ensure the bulb is properly seated and not burnt out. Replace if necessary.
  • Confirm the track head is securely connected to the track and making proper electrical contact.
• Light flickers:
  • Check for a loose bulb.
  • Ensure the track head is firmly seated in the track.
  • Inspect the bulb for damage or a loose filament.
• Fixture is hot to the touch:
  • This is normal during operation, but ensure the correct wattage bulb (max 50W MR-16) is installed. Over-wattage bulbs can cause excessive heat.

If troubleshooting steps do not resolve the issue, contact a qualified electrician or the manufacturer for further assistance.

8. Specifications

Image: Cal 12V MR-16, 50W Track Fixture in Dark Bronze finish, showing dimensions of 3.5 inches in length, 3.5 inches in width, and 3 inches in height. The fixture features a hand-blown glass shade and is designed for track mounting.

9. Warranty and Support

Warranty: This Cal track fixture comes with a manufacturer's warranty of one year from the purchased date. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, or acts of nature.

Customer Support: For technical assistance, warranty claims, or to inquire about replacement parts, please contact your retailer or the manufacturer directly. Please have your model number (HT-954-DB/RDS) and proof of purchase available when contacting support.