GoPro HD Hero 960 Action Camera User Manual

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your GoPro HD Hero 960 action camera. Please read these instructions carefully before using your device to ensure optimal performance and longevity.

Image: The GoPro HD Hero 960 camera, enclosed in its clear waterproof housing, ready for use.

Package Contents

Verify that all items are present in your package:

• GoPro HD Hero 960 Camera
• Waterproof Housing
• Rechargeable Lithium-Ion Battery
• Curved Adhesive Mount
• Flat Adhesive Mount
• Helmet Front Mount
• Headlamp-Style Head Strap
• Quick-Release Buckle
• USB Cable
• Composite Video Cable (RCA)
• Component Video Cable
• Mini Tripod
• Remote Control

Image: A comprehensive view of the GoPro HD Hero 960 camera and its various included accessories, such as cables, mounts, and a mini tripod, spread out on a white surface.

Setup

1. Battery Installation and Charging

1. Open the camera's rear door.
2. Insert the included Lithium-Ion battery, ensuring correct orientation.
3. Close the rear door securely.
4. Connect the camera to a USB power source using the provided USB cable to charge the battery. A full charge provides approximately 2.5 hours of recording time.

2. SD Card Insertion

1. With the camera powered off, open the rear door.
2. Insert a standard SD card (up to 32GB recommended for 9 hours of storage) into the SD card slot until it clicks into place.
3. Close the rear door.
4. Note: Use a Class 4 or higher SD card for optimal video recording performance.

3. Attaching Mounts

The GoPro HD Hero 960 comes with several mounting options:

• Adhesive Mounts (Curved/Flat): These mounts are designed for semi-permanent attachment to surfaces like helmets or vehicles. Ensure the surface is clean and dry before applying. Press firmly for 30 seconds and allow 24 hours for the adhesive to cure before use.
• Helmet Front Mount: Attaches to the front of a helmet, allowing for a forward-facing perspective.
• Headlamp-Style Head Strap: Worn directly on the head or over a helmet for a head-level point-of-view.

Image: The GoPro HD Hero 960 camera securely attached to the side of a white helmet, demonstrating a common mounting configuration for action sports.

Image: The GoPro HD Hero 960 camera attached to a red baseball cap with a head strap, illustrating another versatile mounting option for hands-free recording.

Operating Instructions

1. Powering On/Off

• To power on, press and hold the Power/Mode button until the camera turns on.
• To power off, press and hold the Power/Mode button until the camera turns off.

2. Video Recording

• Press the Power/Mode button repeatedly to cycle through modes until the video icon is displayed.
• Press the Shutter/Select button to start recording. The red LED will flash.
• Press the Shutter/Select button again to stop recording.
• The camera supports 960p (1280x960) and 720p video resolutions, recorded in H.264 (MPEG-4) format.

3. Photo Capture

• Press the Power/Mode button repeatedly to cycle through modes until the photo icon is displayed.
• Press the Shutter/Select button to take a single 5-megapixel photo.
• The camera also supports interval shooting (2 to 60 seconds for up to 2.5 hours), self-timer, and 'triple shot' modes. Refer to the on-screen menu for selecting these options.

4. Underwater Use

The included waterproof housing allows the camera to be used safely up to a depth of 180 feet (55 meters). Ensure the housing is properly sealed before submerging the camera.

Image: The GoPro HD Hero 960 camera, encased in its waterproof housing, attached to the side of an aquarium, demonstrating its capability for underwater or water-adjacent recording.

Maintenance

• Cleaning: After use, especially in saltwater, rinse the camera and housing with fresh water and dry thoroughly. Use a soft, lint-free cloth for cleaning the lens.
• Housing Care: Regularly inspect the waterproof housing's O-ring for dirt, sand, or damage. Clean the O-ring and apply a thin layer of silicone grease if necessary to maintain the seal.
• Storage: Store the camera and accessories in a cool, dry place away from direct sunlight.
• Battery Care: For long-term storage, charge the battery to approximately 50% and remove it from the camera.

Troubleshooting

• Camera Not Turning On: Ensure the battery is charged and correctly inserted. Try connecting to a power source to see if it powers on.
• Poor Video/Photo Quality:
  • Low Light: The HD Hero 960 performs best in bright, daylight conditions. Footage in low light may appear grainy or noisy.
  • Blurry Photos: Hold the camera very still for a second after pressing the shutter button to avoid blur, especially in challenging lighting.
  • Underwater Blur: The standard waterproof housing has a curved lens which can cause blur underwater. For clearer underwater footage, consider purchasing an aftermarket housing with a flat lens.
  • Water Spots: Always wipe the waterproof lens clean and dry before recording or taking photos, especially after being in water, to prevent water spots on your media.
• Vibration Noise in Recordings: If you experience rattling or vibration noises, ensure the camera is securely fastened in its housing and mount. Sometimes, inserting a small piece of paper or foam into the housing can help dampen vibrations.
• SD Card Errors: Ensure the SD card is properly inserted and formatted. Use a high-speed SD card (Class 4 or higher) for reliable recording.

Specifications

Warranty Information

Specific warranty details for the GoPro HD Hero 960 are not provided in this manual. Please refer to the original product packaging or visit the official GoPro website for the most current warranty information.

Support

For further assistance, technical support, or to explore additional accessories, please visit the official GoPro support website:

GoPro Support Website

Official Product Videos

No official product videos from the seller were found in the provided data for direct embedding in this manual.