Introduction
This manual provides comprehensive instructions for the Pro Co Sound 5' Analog Multi Track Recording Cable, designed for seamless integration with Tascam DA88 Recorders and various compatible mixing consoles. Understanding the proper setup and care of this cable will ensure optimal audio signal transfer and longevity.
Product Overview
Key Features
- Pro Co Sound 5' Analog Multi Track Recording Cable - Pro Co Sound 20 Year Warranty
- Compatibility: Tascam DA88 digital audio tape recorders to various mixing consoles including Mackie, Otari, Radar, and Pro Tools DB25 In/Out protocols
- Cable Type: Tascam DA88 style DB25 multitrack analog recording cable
- Length: 5' (1.52m)
- Gauge: 2x 24 Gauge
Product Image
This image displays the Pro Co Sound 5' Analog Multi Track Recording Cable, featuring a D-Sub DB25 connector on one end and eight individual XLR male connectors on the other. The cable is white with black connector housings.
Setup Instructions
Connecting to Tascam DA88
1. Locate the DB25 (D-Sub 25-pin) input/output port on your Tascam DA88 digital audio tape recorder.
2. Connect the DB25 end of the Pro Co Sound cable firmly into the corresponding port on the DA88. Ensure the screws on the DB25 connector are tightened to secure the connection.
Connecting to Mixing Consoles
1. Identify the 8 individual XLR input channels on your mixing console (e.g., Mackie, Otari, Radar, or Pro Tools compatible mixers).
2. Connect each of the eight XLR male connectors from the Pro Co Sound cable into the respective XLR input channels on your mixing console. Ensure each connection is secure.
3. For proper channel assignment, refer to the documentation of your Tascam DA88 and mixing console to match the DB25 pinout to the desired XLR channels.
Operating Guidelines
Once the cable is securely connected between your Tascam DA88 and the mixing console, you can begin routing audio signals.
The cable facilitates the transfer of 8 discrete analog audio channels. Use your mixing console's input gain controls and routing options to manage the audio signals from the DA88.
Always ensure all equipment is powered off before making or breaking connections to prevent damage to the devices or the cable.
Maintenance
To ensure the longevity and optimal performance of your Pro Co Sound cable, follow these maintenance guidelines:
- Store the cable coiled loosely to prevent kinks and damage to the internal wiring. Avoid tight coiling.
- Keep connectors clean and free from dust and debris. Use a soft, dry cloth to wipe them if necessary.
- Avoid placing heavy objects on the cable, which can cause internal damage.
- Do not expose the cable to extreme temperatures or moisture.
- When disconnecting, always pull from the connector housing, not the cable itself, to prevent strain on the connections.
Troubleshooting
No Signal or Intermittent Signal
- Verify all connections: Ensure the DB25 connector is fully seated and secured, and all 8 XLR connectors are properly plugged into their respective inputs.
- Check equipment power: Confirm that both the Tascam DA88 and the mixing console are powered on.
- Test individual channels: If possible, test each channel individually to isolate a potential faulty connection or channel on either the DA88 or the mixer.
- Inspect cable for visible damage: Look for cuts, kinks, or bent pins on the connectors.
Poor Audio Quality (Noise, Distortion)
- Check gain staging: Ensure input gain levels on your mixer are set appropriately to avoid clipping or low signal-to-noise ratio.
- Environmental interference: Keep the cable away from strong electromagnetic fields (e.g., power transformers, unshielded power cables) that could induce hum or noise.
- Grounding issues: Ensure all connected equipment is properly grounded.
Specifications
| Feature | Detail |
|---|---|
| Brand | Proco |
| Connector Type | XLR, DB25 |
| Cable Type | Tascam DA88 style DB25 multitrack analog recording cable |
| Compatible Devices | Tascam DA88 Recorder, Compatible Mixers (Mackie, Otari, Radar, Pro Tools DB25 In/Out protocols) |
| Special Feature | Tangle Free |
| Color | Black |
| Connector Gender | Male-to-Male (XLRs) |
| Length | 5' (1.52m) |
| Gauge | 24 Gauge |
| Item Weight | 1.5 Pounds |
| Product Dimensions | 2.1 x 2.1 x 1.5 inches |
| Model Number | Cable |
| UPC | 703272014316 |
| ASIN | B003Y5BGGK |
| Manufacturer | Pro Co Sound |
| First Available | September 28, 2011 |
Warranty and Support
Warranty Information
This Pro Co Sound cable is backed by a 20-year warranty from Pro Co Sound, ensuring long-term reliability and performance. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Pro Co Sound customer support through their official website or designated support channels.
