Tork 653008 W2 Maxi Centerfeed Dispenser Instruction Manual

Product Overview

The Tork 653008 W2 Maxi Centerfeed Dispenser is designed for efficient, single-hand paper towel dispensing. Its robust construction and smart design make it suitable for various professional environments, improving workflow and productivity.

Image: Front view of the Tork 653008 W2 Maxi Centerfeed Dispenser.

Key Features:

• Easy Refilling: Side-opening lid for quick and simple paper roll replacement.
• Durable Construction: Robust hinges ensure longevity and resistance to wear.
• Paper Protection: Splash-proof cover keeps paper dry and hygienic.
• Space-Saving Design: Wall-mounted installation frees up valuable counter space.
• Optimized Dispensing: Allows users to take as much paper as needed, or single sheets, with one hand.
• Compatibility: Designed for W2 centerfeed rolls, including Tork references 129262, 151203, 130041, 130052, 530237.

Setup and Installation

The Tork 653008 dispenser is designed for wall mounting. Ensure you have the necessary tools before beginning installation.

Required Tools:

• Drill
• Screwdriver
• Measuring tape
• Pencil
• Level
• Appropriate wall anchors and screws (not included)

Installation Steps:

1. Choose Location: Select a suitable wall location, ensuring sufficient clearance for refilling and use. The recommended height for installation is typically between 120-130 cm (47-51 inches) from the floor to the bottom of the dispenser, but adjust as needed for accessibility.
2. Mark Drilling Points: Hold the dispenser against the wall at the desired height. Use a level to ensure it is straight. Mark the positions for the mounting screws through the pre-drilled holes on the back of the dispenser.
3. Drill Holes: Drill holes at the marked points. Use a drill bit appropriate for your wall type and the chosen wall anchors.
4. Insert Anchors: Insert the wall anchors into the drilled holes.
5. Mount Dispenser: Align the dispenser with the anchors and secure it to the wall using screws. Ensure the dispenser is firmly attached and does not wobble.
6. Load Paper Roll: Open the side cover of the dispenser. Place a compatible Tork W2 centerfeed roll inside. Pull the leading edge of the paper through the dispensing opening at the bottom. Close the cover securely.

Operating Instructions

The Tork 653008 dispenser provides easy, single-hand access to paper towels.

Dispensing Paper:

1. Locate the paper towel emerging from the bottom center of the dispenser.
2. Grasp the end of the paper towel firmly with one hand.
3. Pull the paper towel downwards and slightly away from the dispenser to tear off the desired length. The dispenser's design allows for controlled dispensing, whether you need a small sheet or a longer piece.

Image: Diagram illustrating the process of pulling paper from a centerfeed dispenser.

Image: Tork dispenser highlighting its ease of use, approved by the Swedish Rheumatism Association.

Maintenance

Regular maintenance ensures optimal performance and hygiene of your Tork dispenser.

Refilling the Dispenser:

1. When the paper roll is empty or nearly empty, open the side cover of the dispenser.
2. Remove any remaining paper core or scraps.
3. Place a new, compatible Tork W2 centerfeed roll into the dispenser.
4. Pull the leading edge of the paper from the center of the roll and thread it through the dispensing opening at the bottom of the dispenser.
5. Close the side cover securely until it clicks into place.

Cleaning the Dispenser:

• Wipe the exterior of the dispenser regularly with a damp cloth and a mild, non-abrasive cleaning solution.
• Avoid using harsh chemicals or abrasive scrubbers, as these can damage the plastic surface.
• Ensure the dispenser is dry after cleaning to maintain hygiene. The splash-proof cover helps protect the internal paper roll from moisture.

Troubleshooting

If you encounter issues with your Tork 653008 dispenser, refer to the following common solutions:

Specifications

Warranty and Support

For information regarding product warranty, please refer to the documentation provided at the time of purchase or visit the official Tork website.

For further assistance, technical support, or to inquire about spare parts, please contact Tork customer service or visit the Tork brand store:

Tork Official Brand Store