Bruder 02818 Mack Granite Liebherr Crane Truck User Manual

Introduction

This manual provides comprehensive instructions for the Bruder 02818 Mack Granite Liebherr Crane Truck. Designed for realistic play, this model features detailed functions and robust construction. Please read these instructions carefully to ensure proper setup, operation, and longevity of your product.

Image: The Bruder Mack Granite Liebherr Crane Truck, showcasing its detailed design and compact configuration.

Safety Information

WARNING: Choking Hazard - Small parts. Not for children under 3 years.

Always supervise children during play. Ensure all components are securely attached before use. Keep small parts away from young children to prevent choking.

Setup

The Bruder 02818 Mack Granite Liebherr Crane Truck is manufactured in Germany from high-quality ABS plastic, scaled at 1:16. The product dimensions are approximately 26.38 x 12.2 x 7.87 inches. The crane boom can extend to a height of 50 inches with the extension piece.

Counterweight Preparation

The crane includes a counterweight designed to enhance stability during lifting operations. This counterweight can be filled with sand to increase its mass, providing additional balance when handling heavier loads. Ensure the counterweight is securely attached before operating the crane.

Optional Accessories

For enhanced play, the truck can be equipped with the Light and Sound Module 02801 (sold separately). Refer to the module's instructions for installation.

Operating Instructions

Crane Boom Extension and Adjustment

1. To extend the crane boom, carefully pull out the telescopic sections. The boom can reach up to 50 inches in height.
2. An additional extension piece can be snapped onto the end of the boom for maximum reach.
3. The height and angle of the jib are adjustable using the patented adjusting cylinder mechanism.

Image: The crane truck with its main boom fully extended, demonstrating its operational reach.

Hook Operation

The die-cast hook can be lowered and raised using the integrated device, designed for quick and quiet operation. Ensure the hook cable is free from tangles before use.

Image: The crane truck actively lifting a rock, illustrating the hook's functionality.

Stabilizer Legs (Outriggers)

For optimal stability during crane operation, deploy the four outriggers. These legs extend from the chassis to provide a wide, stable base, preventing the truck from tipping over when lifting loads.

Image: A hand demonstrating the adjustment of one of the truck's stabilizer legs.

Cab Access and Rotation

• The driver's cab is constructed from transparent, break-proof polycarbonate and features an opening door for access.
• The crane operator's cab includes a sliding panel door for easy entry and exit.
• The entire crane unit can swivel 360 degrees on its base, allowing for versatile positioning.

Image: The driver's cab door of the truck shown in an open position.

Image: A hand demonstrating the sliding door mechanism of the crane operator's cab.

Engine Compartment Access

The hood of the truck can be unlatched and opened, providing a view of the detailed engine compartment.

Image: The truck's hood is open, showcasing the engine details underneath.

Maintenance

• Cleaning: Wipe the truck with a damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
• Tire Care: The truck features soft, sculptured rubber-like tires. Periodically check for debris or damage.
• Moving Parts: Ensure all moving parts, such as the crane boom, hook mechanism, and doors, operate smoothly. Do not force any parts if they encounter resistance.

Troubleshooting

• Crane not extending/retracting smoothly: Check for any obstructions in the telescopic sections. Ensure the adjusting cylinder is free from debris.
• Hook not lowering/raising: Inspect the cable for tangles or knots. Ensure the winding mechanism is clear.
• Truck instability: Verify that all four stabilizer legs are fully deployed and adjusted to provide maximum support, especially when the crane is extended or lifting objects.

Specifications

Warranty and Support

For information regarding product warranty or to obtain support, please contact Bruder customer service directly. Details can typically be found on the product packaging or the official Bruder website.