D-Link DGS-1008G 8-Port Gigabit Ethernet Switch Instruction Manual

1. Introduction

The D-Link DGS-1008G 8-Port Gigabit Ethernet Switch provides an excellent solution for expanding your Gigabit network. This plug-and-play device offers 8 Gigabit ports, enabling high-speed data transfer up to 10 times faster than a 100Mbps Fast Ethernet connection. It is designed for quiet operation with a fanless desktop form factor and incorporates D-Link Green technology for energy conservation. Quality of Service (QoS) support ensures clear VoIP calls and smooth online gaming by prioritizing network traffic.

Figure 1: D-Link DGS-1008G 8-Port Gigabit Ethernet Switch, compact black design.

2. What's in the Box

Upon opening the package, you should find the following items:

• DGS-1008G Device: The 8-Port Gigabit Ethernet Switch unit.
• Power Adapter: For connecting the switch to an electrical outlet.
• Quick Start Guide: Provides basic setup instructions.
• Wall Mount Kit: Includes screws and anchors for optional wall mounting.
• Rubber Feet: For desktop placement to prevent slipping and protect surfaces.

3. Setup

The DGS-1008G switch is designed for plug-and-play installation, requiring no software configuration. Follow these steps to set up your switch:

1. Placement: Choose a suitable location for your switch. Ensure it is on a stable surface or mounted securely to a wall.
2. Connect Power: Plug the power adapter into the switch's power input port and then into a standard electrical outlet. The Power LED on the switch will illuminate.
3. Connect to Network: Connect an Ethernet cable from your router or modem to any of the 8 Gigabit ports on the DGS-1008G switch. The corresponding Link/Act LED for that port will light up, indicating a successful connection.
4. Connect Devices: Connect your network devices (e.g., computers, network-attached storage, gaming consoles, smart TVs) to the remaining Ethernet ports on the switch using standard Ethernet cables. The Link/Act LEDs for these ports will also illuminate.

The switch automatically detects the network speed (10/100/1000 Mbps) and adjusts accordingly. If the Link/Act LED is blinking, it indicates active data transmission.

4. Operating

The DGS-1008G is an unmanaged switch, meaning it operates automatically without requiring user configuration for basic network functions. Key operational features include:

• Gigabit Speed: All 8 ports support Gigabit Ethernet (1000 Mbps), providing high-speed connectivity for bandwidth-intensive tasks.
• Plug-and-Play: No software or complex setup is required. Simply connect your devices, and the switch will automatically detect and configure the optimal connection speed.
• D-Link Green Technology: This feature helps conserve energy by automatically detecting link status and cable length, adjusting power usage accordingly.
• Quality of Service (QoS): Prioritizes network traffic to ensure smooth performance for critical applications like VoIP calls and online gaming.
• Fanless Design: Ensures silent operation, making it suitable for quiet environments like homes and small offices.

5. Maintenance

To ensure optimal performance and longevity of your D-Link DGS-1008G switch, consider the following maintenance tips:

• Keep it Clean: Periodically wipe the exterior of the switch with a soft, dry cloth to remove dust. Ensure ventilation holes are not obstructed.
• Proper Ventilation: Place the switch in a location with adequate airflow to prevent overheating, especially given its fanless design.
• Cable Management: Keep Ethernet cables organized and free from kinks or excessive bending to prevent signal degradation.
• Power Cycle (if needed): If you experience network issues, try power cycling the switch by unplugging it from the power source for 10-15 seconds and then plugging it back in.

6. Troubleshooting

If you encounter issues with your DGS-1008G switch, refer to the following common troubleshooting steps:

• No Power: Ensure the power adapter is securely connected to both the switch and a working electrical outlet. Check if the Power LED is illuminated.
• No Link/Activity: Verify that Ethernet cables are securely plugged into both the switch and the connected device. Try using a different Ethernet cable or port. Ensure the connected device is powered on and functioning correctly.
• Slow Network Speed: Confirm that all connected devices and cables support Gigabit Ethernet (Cat5e or Cat6 cables are recommended for Gigabit speeds). Check for excessive network traffic or interference.
• Intermittent Connection: Inspect all cable connections for looseness or damage. Try restarting the switch and connected devices.
• Device Not Detected: Ensure the device's network adapter is enabled and configured correctly.

7. Specifications

8. Warranty and Support

For warranty information and technical support, please refer to the documentation included in your product package or visit the official D-Link website. D-Link provides resources and customer service to assist with any product-related inquiries or issues.