Stoves Belling Cooker Oven and Grill Wire Shelf
User Manual
Introduction
This manual provides essential information for the proper installation, use, and maintenance of your Stoves Belling Cooker Oven and Grill Wire Shelf. This is an original manufacturer's replacement part designed to fit specific Stoves and Belling oven and grill models. Please read this manual carefully before use.
Important: Always verify the dimensions of your existing shelf and oven/grill cavity to ensure compatibility before installation. The dimensions of this shelf are 365mm x 397mm.
Product Overview
The Stoves Belling Cooker Oven and Grill Wire Shelf is a genuine replacement component for various Stoves and Belling cooking appliances. It is constructed from durable wire, designed to withstand the high temperatures of ovens and grills.
Image: The Stoves Belling Cooker Oven and Grill Wire Shelf, showing its rectangular wire construction.
Key Features:
- Original Manufacturer's Part: Ensures perfect fit and performance.
- Durable Construction: Designed for longevity in high-temperature environments.
- Standard Dimensions: Measures 365mm (width) x 397mm (depth).
Compatible Models (Partial List):
This shelf is compatible with a range of Stoves and Belling cooker, oven, and grill models, including but not limited to:
- Belling: 317 AN, 317 WH, 327 GR, 327 WH, 329 GR, 329 WH, 331 WH, 332 GR, 332 WH, 333 GR, 333 WH, 335 AN, 335 SI, 335 WH, 350 GR, 350 WH, 351 AN, 351 SI, 351 WH, 371 WH, 852 GR, 852 SI, 852 WH, 924 CH
- Stoves: EC500DOA BL, EC500DOA SI, EC500DOA WH, ES50DOA BL, ES50DOA SI, ES50DOA WH
Always cross-reference the dimensions (365mm x 397mm) with your appliance's requirements.
Installation (Setup)
Installing the wire shelf is a straightforward process. Ensure your oven or grill is cool and switched off before proceeding.
- Prepare the Appliance: Open the oven or grill door. If replacing an old shelf, carefully remove it.
- Identify Shelf Runners: Locate the shelf runners or grooves inside the oven/grill cavity where the shelf will slide in. These are typically on the side walls.
- Insert the Shelf: Hold the new wire shelf horizontally. Carefully slide the shelf into the desired set of runners, ensuring it is level and fully inserted into the cavity.
- Verify Stability: Gently push down on the shelf to ensure it is securely seated and stable before placing any items on it.
No tools are required for installation.
Operating Instructions
Once installed, the wire shelf functions as a standard component within your oven or grill. It is designed to support cookware, baking trays, and food items during cooking or grilling processes.
- Placement: Position the shelf at the appropriate height within your oven or grill based on your recipe's requirements.
- Loading: Place food items or cookware evenly on the shelf to ensure balanced cooking and prevent tipping.
- Heat Resistance: The shelf is designed to withstand typical oven and grill temperatures.
Always use oven mitts when handling the shelf or items on it when the appliance is hot.
Care and Maintenance
Regular cleaning of your wire shelf will help maintain its condition and hygiene.
- Daily Cleaning: After each use, allow the shelf to cool. Wipe away any food spills or grease with a damp cloth and mild detergent.
- Deep Cleaning: For stubborn baked-on food, the shelf can be removed and soaked in warm, soapy water. Use a non-abrasive brush or sponge to scrub away residue.
- Rinsing and Drying: Rinse thoroughly with clean water and dry completely before re-inserting into the oven or grill to prevent water spots or rust.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the shelf's finish.
Troubleshooting
Most issues related to a wire shelf are simple to resolve.
| Problem | Possible Cause | Solution |
|---|---|---|
| Shelf does not fit into the oven/grill. | Incorrect size or incompatible model. | Verify the dimensions (365mm x 397mm) against your appliance's requirements. Confirm your appliance model is listed as compatible. If not, this shelf is not suitable for your appliance. |
| Shelf is wobbly or unstable. | Not fully inserted into runners; damaged runners; incorrect shelf. | Ensure the shelf is fully pushed into the runners on both sides. Inspect the oven/grill runners for any damage. If the shelf is the correct size and runners are fine, contact appliance support. |
| Food residue is difficult to remove. | Baked-on food; insufficient cleaning. | Soak the shelf in warm, soapy water for several hours or overnight. Use a non-abrasive brush or sponge. For very stubborn stains, specialized oven cleaner (safe for metal surfaces) may be used, following product instructions carefully. |
Specifications
| Attribute | Detail |
|---|---|
| Product Type | Cooker Oven and Grill Wire Shelf (Replacement Part) |
| Brand | Stoves / Belling |
| Dimensions (W x D) | 365mm x 397mm |
| Material | Metal Wire |
| Colour | Silver |
| ASIN | B003W4VGLI |
| Compatible Models | Belling: 317 AN, 317 WH, 327 GR, 327 WH, 329 GR, 329 WH, 331 WH, 332 GR, 332 WH, 333 GR, 333 WH, 335 AN, 335 SI, 335 WH, 350 GR, 350 WH, 351 AN, 351 SI, 351 WH, 371 WH, 852 GR, 852 SI, 852 WH, 924 CH; Stoves: EC500DOA BL, EC500DOA SI, EC500DOA WH, ES50DOA BL, ES50DOA SI, ES50DOA WH, and others requiring 365mm x 397mm shelf. |
Warranty and Support
As an original manufacturer's part, this wire shelf is typically covered by the standard warranty terms for genuine replacement parts from Stoves or Belling. Please refer to the documentation provided with your original appliance or contact the manufacturer directly for specific warranty details regarding replacement components.
For further assistance, technical support, or to inquire about other genuine replacement parts, please visit the official Stoves or Belling website or contact their customer service department. Ensure you have your appliance's model number and the shelf's dimensions ready when contacting support.
Note: This manual provides general guidance. Specific appliance models may have unique features or requirements.
