Product Overview
The Better Pack 333 Plus Lever Gum Tape Dispenser is a robust, manual device designed for efficient and secure sealing of packages using water-activated gummed tape. This dispenser provides a reliable and strong seal, making it an ideal solution for various packaging needs.
Figure 1: Better Pack 333 Plus Lever Gum Tape Dispenser. This image shows the dispenser from a front-side angle, highlighting the lever, tape length dial, and the tape exit area.
Setup Instructions
- Unpacking: Carefully remove the dispenser from its packaging. Inspect for any damage during transit.
- Placement: Place the dispenser on a stable, flat surface. Ensure there is enough space around it for operation and tape dispensing.
- Loading Tape:
- Open the rear cover of the dispenser.
- Insert a roll of water-activated gummed tape onto the tape spindle, ensuring the gummed side faces down.
- Feed the leading edge of the tape through the guides and over the moistening brushes.
- Close the rear cover securely.
- Filling Water Reservoir:
- Locate the water bottle/reservoir on the side of the dispenser.
- Remove the water bottle and fill it with clean tap water.
- Invert the filled water bottle and place it back into its designated slot, allowing water to flow into the moistening pan.
- Ensure the moistening brushes are adequately saturated with water before first use.
Operating Instructions
The Better Pack 333 Plus is designed for straightforward operation, providing consistent tape lengths and proper moistening for strong seals.
- Adjusting Tape Length:
- Locate the tape length dial on the side of the dispenser.
- Rotate the dial to select the desired tape length in inches. The numbers on the dial correspond to the length of tape that will be dispensed.
- Dispensing Tape:
- Once the desired length is set, pull the operating lever forward. This action will feed the tape over the moistening brushes, activating the adhesive.
- Continue pulling the lever until the tape reaches the selected length.
- Push the lever back to its original position to cut the dispensed tape.
- Applying Tape:
- Immediately apply the moistened tape to the package.
- Press firmly along the entire length of the tape to ensure proper adhesion. The tape will bond with the box as it dries, creating a strong, tamper-evident seal.
Maintenance
Regular maintenance ensures optimal performance and longevity of your tape dispenser.
- Water Reservoir: Regularly check the water level in the reservoir and refill as needed. Use clean water to prevent mineral buildup.
- Moistening Brushes: Periodically remove and clean the moistening brushes to prevent adhesive buildup and ensure proper tape activation. Rinse them with warm water and allow them to dry before reinserting.
- Cutting Blade: Keep the cutting blade clean and free of tape residue. A dull or dirty blade can lead to uneven cuts. Replace the blade if it becomes dull.
- General Cleaning: Wipe down the exterior of the dispenser with a damp cloth to remove dust and debris. Avoid using abrasive cleaners.
Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tape not dispensing smoothly. | Tape roll misaligned; guides obstructed; dry brushes. | Check tape alignment; clear any obstructions; ensure brushes are wet. |
| Tape not sticking. | Insufficient water on brushes; brushes are dirty; old tape. | Refill water reservoir; clean brushes; try a new roll of tape. |
| Uneven tape cuts. | Dull or dirty cutting blade. | Clean or replace the cutting blade. |
| Water not flowing to moistening pan. | Water bottle not properly seated; airlock in bottle. | Re-seat water bottle; briefly remove and reinsert to break airlock. |
Specifications
- Model Number: BET333
- Brand: Better Packages
- Operation Mode: Manual
- Product Dimensions: 1 x 1 x 1 inches (approximate, as per product data)
- Item Weight: 22 Pounds
- Core Size: 2 inches (5cm)
- Material: Blend
- Manufacturer: Better Packages, Inc.
Warranty and Support
For specific warranty information or technical support, please refer to the documentation included with your purchase or contact Better Packages, Inc. directly through their official website or customer service channels. Keep your purchase receipt for warranty claims.
For additional resources and product information, visit the Better Packages Store on Amazon.
