Introduction
The Behringer Pro Mixer DX2000USB is a 7-channel DJ mixer designed for professional audio mixing applications. It features a built-in USB audio interface, allowing seamless integration with computer-based audio setups. This manual provides essential information for the proper setup, operation, and maintenance of your DX2000USB mixer.
Key features include:
- 7-Channel DJ Mixer with USB Audio Interface
- Auto-talkover Function
- Optical Crossfader
- Sub Bass Out
- 3-Band EQ on all channels
Product Overview
The DX2000USB mixer is equipped with a comprehensive set of controls and connections to facilitate versatile DJ performances and audio mixing. Understanding the layout and function of each component is crucial for optimal use.
Figure 1: Top view of the Behringer Pro Mixer DX2000USB, illustrating the full control surface with seven input channels, EQ sections, faders, and master controls.
Figure 2: Angled perspective of the Behringer Pro Mixer DX2000USB, showing its robust construction and various input/output ports on the rear (not fully visible).
Setup
Unpacking and Initial Inspection
Carefully unpack the mixer and inspect it for any signs of damage during transit. Retain the original packaging for future transport or storage.
The package should contain:
- Behringer Pro Mixer DX2000USB unit
- Infinium "Contact Free" VCA Crossfader (pre-installed)
- USB cable for audio interface connection
- Power cord
- Massive Software Bundle (download information or disc)
Power Connection
Connect the supplied power cord to the mixer's power input and then to a suitable AC power outlet. Ensure the mixer's power switch is in the OFF position before connecting to power.
Audio Connections
The DX2000USB offers multiple input and output options:
- Input Channels: Connect your audio sources (turntables, CD players, media players, microphones) to the respective input channels. Channels 1-3 typically support phono inputs for turntables.
- USB Audio Interface: Connect the mixer to your computer using the provided USB cable for audio playback and recording.
- Main Outputs: Connect the main outputs to your amplifier or powered speakers.
- Monitor Outputs: Connect to your monitor speakers for booth monitoring.
- Sub Bass Output: Connect to a subwoofer for enhanced low-frequency reproduction.
Operating Instructions
Basic Operation
- Power On: After all connections are made, switch on the mixer's power.
- Gain Control: Adjust the GAIN knob for each channel to achieve an optimal input level, ensuring the CLIP LED does not illuminate frequently.
- Equalization (EQ): Use the HIGH, MID, and LOW knobs to adjust the tonal characteristics of each channel.
- Channel Faders: Use the vertical faders to control the volume of individual channels.
- Crossfader: The optical crossfader allows for smooth transitions between assigned channels (A and B).
- Master Output: Adjust the MAIN MIX fader to control the overall output volume.
USB Audio Interface Usage
The integrated USB audio interface allows you to play audio from your computer through the mixer and record the mixer's output to your computer. Install any necessary drivers or software provided with the "Massive Software Bundle" before connecting the USB cable to your computer.
Auto-Talkover Function
The auto-talkover function automatically ducks the music level when a signal is detected on the microphone input, making announcements clearer. Refer to the specific controls on the mixer for activation and sensitivity adjustment.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your DX2000USB mixer.
- Cleaning: Use a soft, dry cloth to clean the exterior of the mixer. Avoid abrasive cleaners or solvents. For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth.
- Dust Protection: Keep the mixer covered when not in use to prevent dust accumulation, especially on faders and knobs.
- Ventilation: Ensure proper ventilation around the mixer to prevent overheating. Do not block ventilation openings.
- Cable Management: Organize cables neatly to prevent strain on connectors and accidental disconnections.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output | Power not connected; volume faders down; incorrect input/output connections. | Check power supply; raise channel/master faders; verify all audio cables are correctly connected. |
| Distorted audio | Input gain too high; damaged cables; faulty source device. | Reduce input GAIN; replace cables; test with a different audio source. |
| USB audio not working | Drivers not installed; incorrect USB channel selected; USB cable issue. | Install necessary drivers; ensure USB input is selected on the mixer and computer; try a different USB port/cable. |
| Humming sound | Ground loop; faulty cable; idle subwoofer port (as per user review). | Check grounding; replace cables; if from subwoofer port, insert an XLR plug into the port if not in use. |
If the problem persists after attempting these solutions, please contact Behringer customer support or a qualified service technician.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Behringer |
| Model Number | DX2000USB |
| Number of Channels | 7 |
| Connectivity Technology | USB |
| Hardware Interface | USB |
| Power Source | Corded Electric |
| Voltage | 240 Volts |
| Color | Black |
| Item Weight | 17.65 pounds (8.01 kg) |
| Product Dimensions (L x W x H) | 17.3 x 13.4 x 6.3 inches (43.9 x 34 x 16 cm) |
| First Available Date | October 1, 2010 |
Warranty and Support
For detailed warranty information and technical support, please refer to the official Behringer website or contact their customer service department. Keep your proof of purchase for warranty claims.
Online resources and support contact information can typically be found at the manufacturer's official website: www.behringer.com
