Introduction
The San Jamar Oceans Twin 9-inch Jumbo Bath Tissue Dispenser (Model R4090TBL) is engineered for commercial washrooms, providing a compact and versatile solution for efficient tissue dispensing. This dispenser incorporates a slider mechanism to ensure that the first roll is completely utilized before the second roll becomes accessible, thereby minimizing waste and reducing maintenance requirements. It is designed for universal compatibility, accommodating any brand or quality of jumbo bath tissue, and ensures continuous paper availability through its infinity system. Constructed from durable, impact-resistant plastic, this unit is built for longevity and reliable performance in high-traffic environments.
Key Features
- Slider Mechanism: Prevents access to the spare roll until the first roll is completely empty, eliminating the need for manual resetting.
- Universal Compatibility: Dispenses any brand or quality of jumbo bath tissue.
- Infinity System: Ensures continuous paper availability, effectively eliminating stub roll waste.
- Durable Construction: Made from impact-resistant plastic for enhanced longevity.
- Capacity: Accommodates two (2) 9-inch jumbo bath tissue rolls.
- Dimensions: Measures 19 inches width by 12 inches height by 5-1/4 inches depth.
Setup
Installation
Follow these steps for proper installation of your San Jamar R4090 dispenser:
- Unpack: Carefully remove the dispenser from its packaging and verify that all components are present and undamaged.
- Select Location: Choose a suitable wall location that allows for easy access, operation, and future maintenance. Ensure adequate clearance around the dispenser.
- Mark Drilling Points: Hold the dispenser against the chosen wall location. Use a pencil to mark the positions for drilling through the dispenser's mounting holes.
- Drill Pilot Holes: Using an appropriate drill bit for your wall material, drill pilot holes at the marked positions.
- Secure Dispenser: Align the dispenser with the drilled holes and secure it firmly to the wall using suitable fasteners (fasteners are not included and should be chosen based on wall type). Ensure the dispenser is level and stable.
Angled view of the San Jamar R4090 Oceans Twin 9-inch Jumbo Bath Tissue Dispenser, highlighting its sleek design and the San Jamar logo. This view is useful for identifying mounting points during installation.
Operating
Loading Tissue Rolls
To load or replace the jumbo bath tissue rolls:
- Open Cover: Insert the provided key into the lock mechanism and turn to open the front cover of the dispenser.
- Insert Rolls: Place two 9-inch jumbo bath tissue rolls onto the internal spindles. Ensure the paper unwinds from the bottom of each roll.
- Close and Lock: Close the front cover securely until it latches. Turn the key to lock the dispenser.
- Dispensing: The slider mechanism will automatically engage, allowing access to only one roll at a time. Once the first roll is fully depleted, the slider will shift, making the second roll available for use.
Front view of the San Jamar R4090 Oceans Twin 9-inch Jumbo Bath Tissue Dispenser in Arctic Blue, showing its translucent cover and dual roll capacity. This illustrates the dispenser in its operational, loaded state.
A San Jamar Classic Twin 9-inch Jumbo Bath Tissue Dispenser, a similar model, mounted on a tiled wall. This image demonstrates typical installation and the compact size suitable for various restroom layouts, highlighting the dual roll functionality.
Maintenance
Cleaning and Care
To ensure the longevity and hygienic operation of your dispenser, follow these maintenance guidelines:
- Exterior Cleaning: Regularly wipe down the exterior surfaces of the dispenser with a mild, non-abrasive cleaner and a soft, damp cloth. Avoid using harsh chemicals, abrasive pads, or solvents, as these can damage the plastic finish.
- Interior Inspection: Periodically open the dispenser and inspect the interior for any dust, debris, or paper fragments that may accumulate. Remove any obstructions to ensure smooth operation.
- Mechanism Check: Verify that the internal slider mechanism moves freely and without resistance. Ensure the spindles for the tissue rolls are clean and allow rolls to rotate smoothly.
- Lock Functionality: Ensure the lock mechanism operates correctly. If it becomes stiff, a small amount of graphite lubricant can be applied to the keyhole.
- Damage Assessment: Inspect the dispenser for any signs of damage, such as cracks or broken parts. Replace damaged components promptly to maintain functionality and appearance.
Troubleshooting
Common Issues and Solutions
| Issue | Solution |
|---|---|
| Paper does not dispense smoothly. | Check for obstructions inside the dispenser. Ensure the tissue rolls are properly seated on the spindles and are not jammed. Verify that the paper is feeding from the bottom of the roll. |
| Dispenser cover does not close or lock. | Ensure no part of the tissue roll or any debris is obstructing the closing mechanism. Check if the key mechanism is clean and functional. |
| Second roll is accessible before the first is empty. | Inspect the slider mechanism for damage or obstruction. Ensure the first roll is fully depleted before expecting the slider to shift to the second roll. |
| Dispenser is loose on the wall. | Tighten mounting screws. If the wall anchors are stripped, consider relocating the dispenser or using new, more robust anchors. |
Specifications
Product Specifications
| Feature | Detail |
|---|---|
| Brand | San Jamar |
| Model Number | R4090TBL |
| Material | Impact-resistant Plastic |
| Color | Arctic Blue |
| Style | Oceans |
| Capacity | Two (2) 9-inch jumbo bath tissue rolls |
| Dimensions (W x H x D) | 19 inches x 12 inches x 5-1/4 inches |
| Minimum Core Diameter | 3-1/4 inches |
Warranty and Support
This instruction manual provides operational and maintenance guidance for your San Jamar R4090 Oceans Twin 9-inch Jumbo Bath Tissue Dispenser. For specific warranty information, details on product guarantees, or technical support, please refer to the official San Jamar website or contact their customer service department directly. Contact information is typically available on the manufacturer's packaging or website.
