Waterway Plastics 806105097668 Wide-Mouth Vinyl Liner Trim Plate Instruction Manual

1. Introduction

This manual provides detailed instructions for the proper installation, maintenance, and care of your Waterway Plastics 806105097668 Wide-Mouth Vinyl Liner Trim Plate. Please read these instructions thoroughly before proceeding with installation to ensure correct usage and longevity of the product. This trim plate is designed for wide-mouth vinyl liner skimmers.

2. Product Overview

The Waterway Plastics 806105097668 is a white, wide-mouth vinyl liner trim plate, also known as a skimmer faceplate cover. It is designed to provide a secure and aesthetic finish around the skimmer opening in vinyl liner pools. This component is crucial for maintaining the integrity of the pool liner and ensuring proper skimmer function.

Key Features:

• Type: Skimmer Faceplate Cover
• Compatibility: Wide-Mouth Vinyl Liner Skimmers (e.g., WW Renegade)
• Color: White
• Material: Durable plastic
• Part Number: 519-9540

Figure 1: Waterway Plastics 806105097668 White Wide-Mouth Vinyl Liner Trim Plate. This image shows the white plastic trim plate, designed to fit around a wide-mouth skimmer opening in a vinyl liner pool, providing a finished edge.

3. Installation Instructions

Proper installation of the trim plate is essential for preventing leaks and ensuring the longevity of your pool liner. It is recommended that installation be performed by a qualified pool technician if you are unfamiliar with the process.

Required Tools:

• Screwdriver (appropriate type for skimmer screws)
• New gaskets (if not included with the trim plate, recommended for a watertight seal)
• Sealant (pool-grade, if recommended by skimmer manufacturer)
• Utility knife or razor blade (for trimming liner)

Installation Steps:

1. Drain Water (if necessary): Lower the pool water level below the skimmer opening to allow for dry installation.
2. Remove Old Faceplate: Carefully unscrew and remove the existing skimmer faceplate and gaskets. Dispose of old gaskets.
3. Clean Surface: Thoroughly clean the area around the skimmer opening on both sides of the pool wall to ensure a clean, smooth surface for the new gaskets.
4. Position Gaskets: Place the new gaskets correctly. Typically, one gasket goes between the skimmer body and the pool wall, and another between the pool liner and the new trim plate. Ensure the screw holes align.
5. Position Trim Plate: Align the new Waterway Plastics trim plate over the outer gasket and the pool liner, ensuring all screw holes match up with the skimmer body.
6. Insert Screws: Insert the screws through the trim plate, liner, gaskets, and into the skimmer body. Hand-tighten all screws initially.
7. Tighten Screws: Using a screwdriver, tighten the screws in a crisscross pattern to ensure even pressure and a watertight seal. Do not overtighten, as this can crack the plastic or strip the threads.
8. Trim Liner: Once the trim plate is securely fastened, carefully use a utility knife or razor blade to trim the excess vinyl liner from the inside of the skimmer opening. Be precise to avoid cutting the gasket or the trim plate.
9. Check for Leaks: Refill the pool to the normal operating level and carefully inspect the skimmer area for any signs of leaks.

4. Maintenance

Regular maintenance will help preserve the appearance and function of your trim plate.

• Cleaning: The trim plate should be cleaned periodically. Use a soft cloth and mild, non-abrasive pool-safe cleaner. The manufacturer recommends Hand Wash Only for cleaning. Avoid harsh chemicals or abrasive scrubbers that could damage the finish.
• Inspection: Periodically inspect the trim plate and surrounding area for any signs of cracking, discoloration, or loose screws. Address any issues promptly to prevent further damage or leaks.
• Winterization: During pool winterization, ensure the skimmer area is properly prepared according to your pool's winterization guidelines to prevent freeze damage to the trim plate and skimmer body.

5. Troubleshooting

This section addresses common issues that may arise with your trim plate.

6. Specifications

Note: The product title and description specify "White Wide-Mouth Vinyl Liner Trim Plate", which typically implies a plastic component. While some specifications listed "Metal" for material and "Black" for color, this manual proceeds with the primary product description of a white plastic trim plate. Please verify product details upon receipt.

7. Warranty and Support

Specific warranty information for the Waterway Plastics 806105097668 Wide-Mouth Vinyl Liner Trim Plate is not provided in this document. For details regarding product warranty, technical support, or replacement parts, please contact Waterway Plastics directly or refer to their official website.

Manufacturer: Waterway Plastics

It is recommended to keep your purchase receipt for warranty claims.