1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of the Datavideo SE-800DV-NTSC Digital Video Switcher. The SE-800DV-NTSC is a professional-grade digital video switcher designed for various video production environments, offering advanced features for seamless video mixing and effects.
2. Safety Information
Please read and understand all safety instructions before operating the Datavideo SE-800DV-NTSC. Retain this manual for future reference.
- Power Supply: Use only the specified power adapter. Ensure the voltage matches the requirements of your region.
- Ventilation: Do not block ventilation openings. Ensure adequate airflow around the unit to prevent overheating.
- Moisture: Keep the unit away from water or excessive moisture. Do not operate in wet conditions.
- Servicing: Refer all servicing to qualified service personnel. Do not attempt to open or repair the unit yourself.
- Placement: Place the unit on a stable, level surface. Avoid placing it near heat sources or in direct sunlight.
3. Package Contents
Upon unpacking, verify that all items listed below are present and in good condition. The Datavideo SE-800DV-NTSC typically includes:
- Datavideo SE-800DV-NTSC Digital Video Switcher unit
- Instruction Manual
- Power Adapter and Cable
- Necessary connection cables (e.g., FireWire, SDI, S-Video, RCA)
- Protective carrying case (as shown in product images)
Figure 3.1: The Datavideo SE-800DV-NTSC Digital Video Switcher, instruction manual, and accessories neatly arranged within its dedicated protective carrying case.
4. Setup
Follow these steps to set up your Datavideo SE-800DV-NTSC Digital Video Switcher:
- Placement: Position the switcher on a stable, flat surface, ensuring adequate ventilation around the unit.
- Power Connection: Connect the power adapter to the switcher's power input and then to a suitable power outlet. Do not power on the unit yet.
- Video Input Connections:
The SE-800DV-NTSC features four DV (i-LINK/FireWire/IEEE-1394) inputs. Additionally, it supports S-Video and RCA (composite) inputs. Connect your video sources (cameras, playback devices) to the appropriate input ports on the rear panel.
Figure 4.1: Detailed view of the rear panel connections, including multiple video inputs (DV, S-Video, RCA), audio inputs, and various output options.
- Audio Input Connections: Connect your audio sources to the dedicated audio input ports (e.g., RCA L/R) on the rear panel.
- Video Output Connections:
Connect your program monitors or recording devices to the DV and SDI output ports. Monitor outputs are also available for previewing individual sources.
Figure 4.2: The SE-800DV-NTSC switcher integrated with external monitors, demonstrating a typical setup for video production.
- Power On: Once all connections are secure, power on the switcher using the main power switch.
5. Operating Instructions
The Datavideo SE-800DV-NTSC offers a range of features for professional video switching and effects. This section outlines key operational aspects.
5.1. Basic Switching
- Source Selection: Use the input selection buttons on the control panel to choose your desired video sources for Program (output) and Preview.
- Transition Control: Utilize the T-bar fader or auto-transition buttons to execute cuts, dissolves, and wipes between selected sources.
5.2. Special Effects and Color Processing
The switcher includes capabilities for special effects and color processing:
- Effects: Access various built-in special effects via dedicated buttons or menus on the control surface.
- Color Processing: Adjust color parameters for inputs or outputs using the color processing controls to achieve desired visual aesthetics.
- Chroma Key: The unit supports chroma keying for green/blue screen applications. Refer to the detailed manual for specific setup and calibration.
5.3. Audio Mixer
An integrated audio mixer allows for control over audio levels from connected sources. Adjust individual channel volumes and master output levels as needed.
5.4. Programmable Playback and External Triggering
The SE-800DV-NTSC supports programmable playback sequences and can trigger effects from external devices, enhancing automation and integration within a production workflow.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Datavideo SE-800DV-NTSC.
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. For stubborn dirt, a slightly damp cloth with mild detergent can be used, followed by a dry cloth. Avoid abrasive cleaners or solvents.
- Ventilation: Regularly check that ventilation openings are clear of dust and debris.
- Storage: When not in use for extended periods, store the switcher in its protective case in a cool, dry environment.
7. Troubleshooting
This section addresses common issues you might encounter with the Datavideo SE-800DV-NTSC.
- No Power:
Ensure the power cable is securely connected to both the unit and the power outlet. Verify the power outlet is functional. Check the power switch position.
- No Video Output:
Confirm that video sources are properly connected and active. Check the selected input on the switcher. Verify that output cables are securely connected to monitors/recorders and that these devices are powered on and set to the correct input.
- No Audio Output:
Ensure audio sources are connected and active. Check audio levels on the switcher's audio mixer. Verify output cables and monitor/recorder settings.
- Effects Not Working:
Ensure the effect is correctly selected and parameters are set. Refer to the detailed manual for specific effect activation procedures.
If issues persist, consult the full instruction manual or contact Datavideo customer support.
8. Specifications
Key technical specifications for the Datavideo SE-800DV-NTSC Digital Video Switcher:
| Feature | Detail |
|---|---|
| Model | SE-800DV-NTSC |
| Processing | Full Digital Processing |
| Video Inputs | 4 x DV (i-LINK/FireWire/IEEE-1394), S-Video, RCA (Composite) |
| Video Outputs | DV, SDI, Monitor Outputs |
| Audio Mixer | Integrated |
| Special Features | Programmable Playback, Trigger Effects From External Device, Special Effects, Color Processing, Chroma Key |
| Item Weight | 15.77 pounds |
| Package Dimensions | 17.48 x 17.24 x 7 inches |
| Date First Available | June 17, 2003 |
| Manufacturer | Datavideo |
9. Warranty and Support
Datavideo products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Datavideo website.
For technical support, troubleshooting assistance, or service inquiries, please contact Datavideo customer support through their official channels. When contacting support, please have your product model (SE-800DV-NTSC) and serial number available.
