Hamilton Beach Ice Shaver 68506 Instruction Manual

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions.
• Do not touch moving parts.
• To protect against risk of electrical shock, do not immerse cord, plugs, or appliance in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact Hamilton Beach Customer Service for examination, repair, or adjustment.
• The use of attachments not recommended or sold by Hamilton Beach may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Do not use appliance for other than intended use.
• Blades are sharp. Handle carefully.

Parts and Features

Familiarize yourself with the components of your Hamilton Beach Ice Shaver:

• Lid with Plunger: Secures ice and applies pressure during shaving.
• Ice Chute: Where ice is fed into the shaving mechanism.
• Shaving Blade: Stainless steel blade for creating shaved ice.
• Shaving Mechanism: The internal components that shave the ice.
• Control Dial: Allows selection between 'Slushie' (finer ice) and 'Snow Cone' (coarser ice) settings.
• Collection Bowl: Included container to collect shaved ice.
• Base Unit: Houses the motor and provides stability.

Image: Hamilton Beach Ice Shaver 68506. This image displays the complete ice shaver unit in black, with a clear lid and a collection bowl filled with green slushie, alongside two filled margarita glasses.

Setup

1. Unpack and Clean: Carefully remove all packaging materials. Wash the lid, collection bowl, and any other removable parts in warm, soapy water. Rinse thoroughly and dry. The removable parts are dishwasher safe.
2. Assemble: Place the collection bowl securely under the ice chute on the base unit.
3. Prepare Ice: Ensure you have solid ice cubes ready. For best results, use ice cubes that are not too large to fit comfortably into the ice chute.

Operating Instructions

Follow these steps to create delicious shaved ice:

1. Place Collection Bowl: Ensure the included mixing bowl or your own suitable dish is positioned correctly beneath the ice shaver's output.
2. Add Ice: Open the lid and place ice cubes into the ice chute. Do not overfill.
3. Secure Lid: Close the lid firmly. The unit will not operate unless the lid is properly secured.
4. Select Ice Consistency: Use the control dial to choose your desired ice consistency: 'Slushie' for finer ice, or 'Snow Cone' for slightly coarser ice.
5. Activate Shaver: Plug the unit into a standard electrical outlet. Press down on the lid/plunger to activate the shaving mechanism. Apply gentle, consistent pressure.
6. Collect Shaved Ice: The shaved ice will dispense into the collection bowl. Continue until you have the desired amount.
7. Add Flavor: Once shaved, add your favorite syrups, juices, or other ingredients to create snow cones, slushies, margaritas, or other frozen cocktails. Recipes are included with the product for inspiration.

Image: Hamilton Beach Ice Shaver preparing snow cones. The image shows the ice shaver with a bowl of shaved ice and several colorful snow cones in paper cups.

Image: Hamilton Beach Ice Shaver preparing slushies. The image features the ice shaver with its mixing bowl filled with green slushie, ready for serving.

Cleaning and Maintenance

Regular cleaning ensures optimal performance and longevity of your ice shaver:

1. Unplug: Always unplug the appliance from the electrical outlet before cleaning.
2. Disassemble: Remove the lid and collection bowl.
3. Wash Removable Parts: The lid, plunger, and collection bowl are dishwasher safe. Alternatively, wash them in warm, soapy water, rinse, and dry thoroughly.
4. Clean Base Unit: Wipe the exterior of the base unit with a damp cloth. Do not immerse the base unit in water or any other liquid.
5. Storage: Ensure all parts are completely dry before reassembling and storing the appliance.

Troubleshooting

If your ice shaver is not operating as expected, refer to these common issues and solutions:

• Unit does not turn on:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Check that the lid is properly secured and the plunger is pressed down to activate the safety switch.
• Ice is not shaving properly or is too coarse/fine:
  • Verify that the control dial is set to the desired consistency (Slushie for finer, Snow Cone for coarser).
  • Ensure ice cubes are not too large or too small for the chute.
  • Apply consistent pressure on the plunger.
• Unit is excessively loud or vibrates:
  • This is normal during ice shaving. Ensure the unit is on a stable, flat surface.
  • Check that the lid and collection bowl are correctly assembled.

Specifications

Warranty and Support

This Hamilton Beach Ice Shaver includes a 5-year limited warranty from Hamilton Beach.

For warranty claims, technical support, or replacement parts, please contact Hamilton Beach Customer Service directly. Refer to the contact information provided in your product packaging or visit the official Hamilton Beach website.