1. Introduction
This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your Graham-Field Liberty Full Length Bed Rail, Model GF6570B-1. Please read this manual thoroughly before use and retain it for future reference.
The Liberty Full Length Bed Rail is designed to enhance safety for individuals using compatible medical beds by providing a secure barrier and support. It is specifically engineered for use with Patriot™ and WhisperLite™ II full-electric beds, whether used as standard-height or low beds.
2. Safety Information
WARNING: Failure to follow these safety instructions could result in serious injury or death.
- Always ensure the bed rail is securely installed according to the instructions before use.
- This bed rail is designed to reduce the risk of entrapment by decreasing spacing between crossbars. However, regular checks are necessary to ensure proper placement and function.
- Verify that the spring-loaded, self-adjusting crossbraces are properly engaged and their safety tabs prevent accidental disengagement.
- The bed rail must only be used with compatible Patriot™ and WhisperLite™ II full-electric beds. Using it with incompatible beds may compromise safety and stability.
- Regularly inspect the bed rail for any signs of wear, damage, or loose components. Do not use if damaged.
- Keep hands and fingers clear of moving parts during installation and operation.
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is a medical device and should be used under appropriate guidance.
3. Package Contents
Upon unpacking, please verify that all components are present and undamaged. The package should contain:
- One (1) Graham-Field Liberty Full Length Bed Rail (Model GF6570B-1)
- All necessary mounting hardware for attachment to compatible Patriot™ or WhisperLite™ II bed decks.
If any parts are missing or damaged, do not proceed with installation. Contact Graham-Field customer support immediately.
4. Setup and Installation
The Liberty Full Length Bed Rail features a tool-free installation process, designed for ease of use and proper placement.
- Compatibility Check: Ensure your bed is a Patriot™ or WhisperLite™ II full-electric bed. This bed rail is specifically designed for these models.
- Positioning: Identify the fixed, patent-pending rail slots on the bed deck of your Patriot™ or WhisperLite™ II bed. These slots are designed to prevent sliding and ensure proper rail placement.
- Mounting: Align the bed rail's mounting points with the designated slots on the bed deck. Gently lower the bed rail into position, ensuring it seats firmly within the slots.
- Secure Engagement: Confirm that the spring-loaded, self-adjusting crossbraces engage properly. Listen for a click or visually verify that the safety tabs are fully extended and locked, preventing accidental disengagement.
- Final Check: Once installed, gently attempt to move the bed rail to ensure it is securely fixed and does not slide or move independently.
Figure 1: The Graham-Field Liberty Full Length Bed Rail securely installed on a compatible medical bed, demonstrating its full length and robust construction.
5. Operating Instructions
The Liberty Full Length Bed Rail is designed for straightforward operation once installed.
- Raising/Lowering: The bed rail features spring-loaded, self-adjusting crossbraces. To adjust the rail, locate the release mechanism (typically a button or lever) on the crossbraces. Depress the mechanism to disengage the safety tabs, allowing the rail to be moved. Release the mechanism to re-engage the safety tabs and lock the rail in the desired position.
- Full Bed Articulation: The new bed rail length is designed to close open areas that can occur during full bed articulation, maintaining continuous safety. Ensure the rail remains securely attached and functional as the bed adjusts.
6. Maintenance and Care
Proper maintenance ensures the longevity and safe operation of your bed rail.
- Cleaning: Wipe the bed rail with a damp cloth. Use mild soap and water if necessary. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspection: Regularly inspect all components for signs of wear, corrosion, or damage. Pay close attention to the mounting points, crossbraces, and safety tabs.
- Lubrication: No specific lubrication is required for the powder-coated steel construction.
- Storage: If storing the bed rail, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.
7. Troubleshooting
This section addresses common issues you might encounter with your bed rail.
- Rail feels loose after installation:
Ensure the rail is fully seated in the bed deck slots. Verify that the spring-loaded crossbraces are engaged and safety tabs are locked. Re-install if necessary, following Section 4 carefully.
- Difficulty raising or lowering the rail:
Check for any obstructions. Ensure the release mechanism is fully depressed. If the issue persists, inspect the crossbraces and safety tabs for damage or debris.
- Unusual noises during operation:
Inspect all moving parts for wear or damage. Ensure all connections are secure. If noises persist, discontinue use and contact customer support.
If you experience any issues not covered here, or if troubleshooting steps do not resolve the problem, please contact Graham-Field customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | GF6570B-1 |
| Brand | Graham-Field |
| Product Dimensions | 44.5"W x 13.5"H |
| Item Weight | 0.01 ounces (Note: This weight may refer to packaging or a component, actual product weight may vary) |
| Material | Heavy-duty steel construction with powder-coated hammertone finish |
| Compatibility | Patriot™ and WhisperLite™ II full-electric beds |
| Installation | Tool-free |
| Adjustable Length | No |
| Age Range (Description) | Adult |
| Product Care Instructions | Wipe With Damp Cloth |
| UPC | 717076107617 |
9. Warranty Information
The Graham-Field Liberty Full Length Bed Rail (Model GF6570B-1) is covered by a 3 Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service.
For specific terms, conditions, and to make a warranty claim, please refer to the official Graham-Field warranty documentation or contact their customer support directly. Keep your proof of purchase for warranty validation.
10. Support and Contact
For further assistance, technical support, or inquiries regarding your Graham-Field Liberty Full Length Bed Rail, please contact Graham-Field customer service.
You can typically find contact information, including phone numbers and email addresses, on the official Graham-Field website or through the retailer where you purchased the product.
Manufacturer: Graham-Field
Website: Visit the Graham-Field Store on Amazon (for product information)
