Wenko Turbo-Loc Toilet Roll Holder Instruction Manual

1. Product Overview

The Wenko Turbo-Loc Toilet Roll Holder is designed for easy installation without drilling. It features a robust chrome-plated steel construction and utilizes the Turbo-Loc adhesive system for secure mounting on smooth surfaces. This holder is suitable for bathrooms and guest toilets, providing a practical and residue-free removable solution.

Key Features:

• Turbo-Loc Wall Mounting System: Equipped with a special adhesive pad for fast and effortless mounting without screws and drilling.
• Strong Hold: Provides an extremely firm hold on all smooth surfaces.
• Residue-Free Removal: Can be removed without leaving any residue.
• Durable Construction: Made from heavy, solid chrome-plated steel.

Figure 1: Wenko Turbo-Loc Toilet Roll Holder, front view.

Figure 2: Key features of the Turbo-Loc system, highlighting drill-free installation and strong hold.

2. Installation Instructions

The Turbo-Loc system allows for quick and secure installation without the need for drilling. Follow these steps for optimal adhesion:

1. Prepare the Surface: Ensure the mounting surface is clean, dry, and free from dust, grease, or soap residues. The Turbo-Loc system works best on smooth, non-porous surfaces such as tiles, glass, or metal.
2. Remove Protective Film: Carefully peel off the protective film from the back of the adhesive pad.
3. Position and Press: Place the adhesive pad firmly onto the desired location on the wall. Press down very firmly for at least 30 seconds to ensure maximum contact and air removal.
4. Allow to Set: For best results, allow the adhesive pad to set for 24-48 hours before attaching the toilet roll holder and applying any weight. This allows the adhesive to cure fully.
5. Attach Holder: Slide the toilet roll holder onto the mounted adhesive pad until it clicks securely into place.

Figure 3: Visual guide for the Turbo-Loc adhesive pad installation process.

Removal Instructions:

To remove the holder without leaving residue, gently pry the adhesive pad off the surface using a spatula or similar flat tool. Apply steady, even pressure to avoid damaging the surface.

3. Operating Instructions

Using the Wenko Turbo-Loc Toilet Roll Holder is straightforward:

1. Inserting a Toilet Roll: Slide a standard-sized toilet paper roll onto the holder arm from the open side.
2. Removing a Toilet Roll: When the roll is empty, simply slide the cardboard core off the holder arm.

Figure 4: The toilet roll holder with a roll of toilet paper.

4. Care and Maintenance

To maintain the appearance and longevity of your Wenko Turbo-Loc Toilet Roll Holder, follow these simple care instructions:

• Cleaning: Wipe the holder regularly with a soft, damp cloth. For stubborn marks, a mild soap solution can be used.
• Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, or chemical solvents, as these can damage the chrome finish.
• Drying: Dry the holder immediately after cleaning to prevent water spots, especially in hard water areas.

5. Troubleshooting

If you encounter issues with your toilet roll holder, refer to the following common solutions:

• Holder is not sticking firmly:
  • Ensure the surface was thoroughly cleaned and dry before application.
  • Verify the surface is smooth and non-porous (e.g., not textured tiles or painted drywall).
  • Apply firm pressure for the recommended duration during installation.
  • Allow the adhesive to cure for the full 24-48 hours before applying weight.
• Holder appears loose after installation:
  • Re-check that the holder is fully engaged with the adhesive pad.
  • If the adhesive pad itself is loose, it may need to be removed and re-applied to a properly prepared surface, or a new adhesive pad may be required.

6. Product Specifications

Figure 5: Dimensions of the Wenko Turbo-Loc Toilet Roll Holder.

7. Warranty and Support

Specific warranty information for the Wenko Turbo-Loc Toilet Roll Holder is not provided in this manual. Please refer to the product packaging or the official Wenko website for detailed warranty terms and conditions.

For customer support, technical assistance, or to inquire about replacement parts, please contact Wenko customer service through their official website or the retailer from whom the product was purchased.