Piko 35005 G Power Supply 32 VA Instruction Manual

1. Introduction

This instruction manual provides essential information for the safe and effective use of your Piko 35005 G Power Supply 32 VA. This power supply is specifically designed for use with Piko G drivers, such as model #35002, and is suitable for outdoor applications due to its weatherproof construction.

2. Safety Instructions

Always ensure the power supply is disconnected from the mains before making any connections or disconnections.
Do not expose the power supply to extreme temperatures or direct sunlight for prolonged periods.
Despite its weatherproof (IP67) rating, avoid submerging the unit in water.
Do not attempt to open or repair the power supply. Refer all servicing to qualified personnel.
Ensure the power supply is placed on a stable surface and that cables are routed to prevent tripping hazards or damage.
This product is intended for model railway use and should not be used for other purposes.

3. Product Overview

The Piko 35005 is a robust power supply designed to provide stable DC power for your G-scale model railway drivers. Its IP67 rating ensures protection against dust ingress and temporary immersion in water, making it suitable for outdoor garden railway setups.

Figure 1: Piko 35005 G Power Supply 32 VA unit. This black, rectangular unit features integrated cables and mounting tabs with screw holes on each end. Its surface displays key specifications including 'Netzgerät Nr. 35005', 'PRI: 230 V AC', 'SEC: 22 V DC', '50-60Hz', '32 VA', and 'IP67'.

4. Setup

Placement: Choose a suitable location for the power supply, ensuring it is stable and accessible. While weatherproof, placing it in a sheltered area can extend its lifespan.
Input Connection: Connect the primary (input) cable of the Piko 35005 power supply to a standard 230 V AC mains outlet. Ensure the outlet is properly grounded.
Output Connection: Connect the secondary (output) cable of the power supply to the designated input terminals of your Piko G driver (e.g., Piko 35002). Observe correct polarity if specified by the driver. The output is 22 V DC.
Cable Management: Secure all cables to prevent accidental disconnections or damage. Avoid sharp bends or kinks in the cables.

5. Operation

Once the Piko 35005 G Power Supply is correctly connected to both the mains and your Piko G driver, it is ready for operation. The power supply will provide a stable 22 V DC output to power your model railway system.

Ensure all connections are secure before applying power.
Turn on the mains power to the power supply.
Operate your Piko G driver according to its specific instructions.
If the power supply is not in use for an extended period, it is recommended to disconnect it from the mains.

6. Maintenance

The Piko 35005 G Power Supply requires minimal maintenance. Regular inspection and cleaning will help ensure its longevity and reliable performance.

Cleaning: Periodically wipe the exterior of the power supply with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the unit is disconnected from power before cleaning.
Inspection: Regularly check the cables for any signs of damage, such as cuts, fraying, or exposed wires. Inspect the housing for cracks or other physical damage. If any damage is found, discontinue use immediately and contact Piko support.
Storage: When not in use, store the power supply in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

Problem	Possible Cause	Solution
No power output from the unit.	Power supply not connected to mains. Mains outlet is not active. Damaged cable or unit.	Ensure the primary cable is securely plugged into a live 230 V AC outlet. Test the mains outlet with another device. Inspect cables for damage. If damaged, discontinue use and contact support.
Intermittent power.	Loose connections. Faulty mains outlet.	Check all input and output connections for tightness. Try a different mains outlet.

If troubleshooting steps do not resolve the issue, please contact Piko customer support.

8. Specifications

Model Number: 35005
Brand: Piko
Primary Input: 230 V AC, 50-60 Hz
Secondary Output: 22 V DC
Power Output: 32 VA
Protection Rating: IP67 (Weatherproof)
Compatibility: Designed for Piko G drivers (e.g., Piko 35002)
Recommended Age: 14 years and up
Manufacturer: Piko

9. Warranty and Support

Piko products are manufactured to high-quality standards. This product is covered by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Piko website.

For technical support, spare parts, or further assistance, please contact Piko customer service. Contact information can typically be found on the Piko website or on the product packaging.

Piko Official Website: www.piko.de

	PIKO VT612 Regioswinger Spare Parts List Detailed spare parts list for the PIKO VT612 Regioswinger model train, including part numbers and descriptions for DC and AC versions. This document helps identify and order replacement components for the model.
	PIKO Katalog 2026: Spur N Modelleisenbahn \| Lokomotiven, Wagen & Zubehör Entdecken Sie den PIKO Katalog 2026 für Spur N (1:160) Modellbahnen. Finden Sie detaillierte Lokomotiven, Wagen, Gebäudemodelle und Zubehör für Ihre Modelleisenbahnanlage.
	PIKO Neuheiten 2023: Modellbahn-Highlights im Maßstab H0 PIKO präsentiert sein umfassendes Sortiment an neuen Modelleisenbahnprodukten für 2023 im Maßstab H0. Entdecken Sie detailgetreue Dampf-, Elektro- und Diesellokomotiven sowie eine breite Palette an Personen- und Güterwagen.
	REMS Radialpressen Betriebsanleitung: Mini-Press, Power-Press & Akku-Press Offizielle Betriebsanleitung für REMS Radialpressen. Umfassende Informationen zu Betrieb, Wartung und Sicherheit für REMS Mini-Press, Power-Press und Akku-Press Modelle.
	DJI DB1560/DB800 Intelligent Flight Battery User Guide User guide for the DJI DB1560 and DB800 Intelligent Flight Batteries, detailing features, operation, safety precautions, charging, storage, disposal, and specifications for DJI Agras aircraft.
	DJI T40/T20P Intelligent Flight Battery User Guide Comprehensive user guide for DJI T40 and T20P Intelligent Flight Batteries, covering features, safety, operation, maintenance, and specifications for DJI Agras agricultural drones.

Piko 35005