Trend Tool & Bit Cleaner User Manual

Introduction

The Trend Tool & Bit Cleaner is an industrial-strength solution designed to effectively remove wood and resin buildup from various cutting tools. This product helps restore tool performance and extends their lifespan by providing cleaning, lubrication, and protection against rust and corrosion. It is formulated to be non-flammable, non-toxic, and biodegradable, offering a safer alternative to harsh chemical cleaners.

Safety Information

Always prioritize safety when handling cleaning agents and tools.

• Non-Flammable & Non-Toxic: The cleaner is designed to be non-flammable and non-toxic, making it safer for use in various environments.
• Biodegradable: This product is biodegradable, reducing environmental impact.
• Ventilation: Use in a well-ventilated area.
• Eye Protection: Wear appropriate eye protection to prevent accidental splashes.
• Skin Protection: Wear gloves to protect skin from prolonged contact.
• Storage: Store in a cool, dry place, away from direct sunlight and out of reach of children and pets.
• Disposal: Dispose of empty containers and any unused product according to local regulations.

Product Overview

The Trend Tool & Bit Cleaner comes in a convenient pump-action dispenser bottle, making application straightforward. Its unique formula targets and breaks down the molecular bond of foreign materials like wood resin and grime, lifting them from the tool surface without harsh abrasives.

Key Features:

• Industrial-strength cleaning for wood and resin removal.
• Non-flammable, non-toxic, and biodegradable formulation.
• Provides rust and corrosion protection.
• Acts as an excellent lubricant for tools.
• Increases the operational life of tools.
• Suitable for a wide range of tools including saw blades, router bits, planer blades, files, wrenches, and drill bits.

Image: The Trend Tool & Bit Cleaner in its 18 fl oz bottle with the spray nozzle attached, ready for use.

Setup

The Trend Tool & Bit Cleaner is supplied with a pump-action dispenser bottle.

1. Unpack: Carefully remove the cleaner bottle and spray nozzle from its packaging.
2. Attach Nozzle: If the spray nozzle is not already attached, screw it securely onto the bottle opening until hand-tight. Ensure the dip tube is properly inserted into the liquid.
3. Prepare Work Area: Lay down a protective mat or old newspapers on your work surface to catch any drips or residue. Ensure the area is well-ventilated.

Image: The cleaner bottle and its separate spray nozzle before assembly.

Operating Instructions

Follow these steps for effective cleaning of your tools. Always ensure tools are disconnected from power sources and are cool before cleaning.

Cleaning Saw Blades:

1. Apply Cleaner: Place the saw blade on a flat, protected surface. Spray the Trend Tool & Bit Cleaner generously onto both sides of the blade, ensuring full coverage of the teeth and body where resin buildup is present.


Image: Applying the cleaner to a saw blade to loosen resin and grime.

2. Allow to Soak: Let the cleaner sit on the blade for a few minutes (e.g., 2-3 minutes) to allow it to penetrate and break down the hardened resin.
3. Scrub: Use a stiff brush (e.g., a brass brush or an old toothbrush) to gently scrub the blade, focusing on areas with heavy buildup. The resin should come off with minimal effort.

Image: Scrubbing the saw blade with a brush to remove loosened debris.
4. Wipe Clean: Wipe the blade thoroughly with a clean, dry cloth or paper towel. No rinsing is typically required as the cleaner also provides lubrication and rust protection.


Image: Wiping the saw blade clean after scrubbing, revealing a polished surface.

Cleaning Router Bits and Drill Bits:

1. Apply Cleaner: Hold the router bit or drill bit over a protected surface. Spray the cleaner directly onto the cutting edges and flutes where resin and wood residue accumulate.

Image: Applying the cleaner to a router bit to dissolve accumulated resin.
2. Soak and Scrub: Allow the cleaner to soak for a short period. Use a small brush (like an old toothbrush) to scrub away the softened residue.


Image: Scrubbing the router bit with a toothbrush to remove stubborn residue.

3. Wipe Clean: Wipe the bit clean with a dry cloth. The tool should now be free of resin and ready for optimal performance.


Image: Wiping the router bit clean, leaving it ready for use.

This cleaner is also effective on planer blades, files, and wrenches. The process remains similar: spray, allow to soak, scrub if necessary, and wipe clean.

Maintenance

Regular use of Trend Tool & Bit Cleaner contributes significantly to the longevity and performance of your tools.

• Rust and Corrosion Protection: Beyond cleaning, the formula leaves a protective layer that helps prevent rust and corrosion, which is crucial for maintaining the sharpness and integrity of metal tools.
• Lubrication: The cleaner also acts as a lubricant, which can improve the cutting efficiency of blades and bits and reduce friction during operation.
• Increased Tool Life: By regularly removing resin and providing protection, the cleaner helps to maintain the original cutting geometry of the tools, reducing the need for frequent sharpening or replacement.

Troubleshooting

The Trend Tool & Bit Cleaner is designed for straightforward use. If you encounter any issues, consider the following:

• Stubborn Buildup: For very heavy or old resin buildup, a longer soaking time (e.g., 5-10 minutes) may be beneficial. Multiple applications and scrubbing might be required.
• Insufficient Cleaning: Ensure the tool surface is adequately saturated with the cleaner. Use a suitable brush to agitate the residue.
• Spray Nozzle Issues: If the spray nozzle is not functioning correctly, ensure it is securely attached and not clogged. Clean the nozzle by spraying warm water through it if necessary.

If problems persist or for specific concerns not addressed here, please contact Trend customer support for assistance.

Specifications

Warranty and Support

For information regarding product warranty, returns, or technical support, please contact the manufacturer directly.

Manufacturer: TREND
Please refer to the official TREND website or product packaging for the most current contact information and warranty details.