KERBL 299626

KERBL Agritura Mole Trap VOLEX Wolff Model 299626 Instruction Manual

1. Introduction

This instruction manual provides essential information for the safe and effective use of the KERBL Agritura Mole Trap VOLEX Wolff, Model 299626. Please read this manual thoroughly before operating the trap to ensure proper setup, operation, and maintenance. This trap is designed for the humane capture of moles.

2. Safety Information

WARNING: This product is a trap and can cause injury if not handled correctly. Keep out of reach of children and pets. Always wear protective gloves when handling the trap, especially after it has been set or triggered.

3. Package Contents

Verify that all components are present in the package:

KERBL Agritura Mole Trap VOLEX Wolff

Image 1: The KERBL Agritura Mole Trap VOLEX Wolff, Model 299626. This image shows the trap in its assembled state, constructed from metal and featuring a spring-loaded mechanism.

4. Setup and Assembly

The KERBL Agritura Mole Trap VOLEX Wolff is designed for straightforward setup. No complex assembly is required.

  1. Locate Mole Run: Identify active mole runs by pressing down on tunnels. If the tunnel is repaired within 24-48 hours, it is active.
  2. Prepare Trap Site: Carefully open a section of the active mole run, large enough to insert the trap without disturbing the tunnel structure excessively.
  3. Set the Trap: Follow the specific setting instructions for the VOLEX Wolff trap. This typically involves compressing the spring mechanism and securing the trigger plate. Refer to the diagram below for visual guidance on setting the trap.
  4. Insert Trap: Place the set trap into the mole run, ensuring the trigger mechanism is aligned with the direction of mole travel. Cover the opening with soil or a dark object to block light, as moles are sensitive to light in their tunnels.
Setting the KERBL Agritura Mole Trap

Image 2: Illustrative image of the trap being set. This image demonstrates how to compress the spring and engage the trigger mechanism before placing the trap into a mole tunnel.

5. Operating Instructions

Once the trap is set and placed, regular monitoring is essential.

6. Maintenance

Proper maintenance ensures the longevity and effectiveness of your trap.

7. Troubleshooting

ProblemPossible CauseSolution
Trap not triggeringIncorrect setting; mole avoiding trap; trap mechanism obstructed.Ensure trap is set correctly. Relocate to a more active run. Clear any debris from the mechanism.
No capturesInactive mole run; trap scent; improper placement.Verify mole run activity. Clean trap thoroughly. Ensure trap is placed firmly in the run and covered.
Trap is rustyImproper storage; prolonged exposure to moisture.Store in a dry environment. Lightly oil moving parts if rust is minor. Replace if rust affects functionality.

8. Specifications

9. Warranty and Support

For warranty information or technical support regarding your KERBL Agritura Mole Trap VOLEX Wolff, please refer to the retailer where the product was purchased or visit the official KERBL website. Keep your proof of purchase for any warranty claims.

Note: Warranty terms may vary by region and retailer.