1. Product Overview
The iGaging EZ-View Pro Digital Read Out (DRO) is a high-precision measuring system designed for accurate linear measurements. It utilizes advanced absolute memory technology, ensuring that the display always shows the true position without needing to reset zero after power cycles. The system features an industrial-grade aluminum body for durability and a large, easy-to-read LCD display for clear readings.
Key features include:
- Easy-view x-large LCD display for clear readings.
- Industrial-grade aluminum body for robust construction.
- Combinable readout panel for flexible installation.
- Supports X, Y, and Z 3-axis installation with magnetic back for versatile mounting.
- Provides readings in inch, metric, and interchangeable fractional units (32nd, 64th, 128th).
- Unlimited measuring speed for efficient operation.
This image displays the complete iGaging EZ-View Pro Digital Read Out system. It includes the digital display unit with an LCD screen and control buttons, the long sensor bar (610mm length), and various mounting brackets for installation. A power cable is also visible, connecting to the display unit.
2. Setup and Installation
Before operating your iGaging EZ-View Pro DRO, ensure proper installation to achieve accurate measurements.
2.1 Unpacking and Inspection
- Carefully remove all components from the packaging.
- Verify that all included components are present: Digital Readout unit, 610mm sensor bar, and various mounting brackets.
- Inspect all parts for any signs of damage during shipping. If any damage is found, contact your supplier immediately.
2.2 Mounting the Sensor Bar and Readout Unit
The system is designed for X, Y, and Z 3-axis installation. The readout unit features a magnetic back for convenient attachment to ferrous surfaces, or it can be mounted using the provided brackets.
- Identify the desired axis for measurement (X, Y, or Z) on your machine or workbench.
- Securely mount the 610mm sensor bar to a stable, flat surface using appropriate fasteners through the mounting holes at each end of the bar. Ensure the bar is parallel to the intended direction of travel.
- Attach the sensor head (the moving part connected to the display unit) to the moving component of your machine. Ensure the sensor head slides smoothly along the sensor bar without binding.
- Mount the digital readout unit in a convenient location where the display is easily visible. Use the magnetic back for quick attachment or secure it with the provided brackets.
- Connect the sensor cable from the sensor head to the digital readout unit.
2.3 Powering the Unit
The iGaging EZ-View Pro DRO is battery-powered. It comes with lithium batteries included.
- Ensure batteries are correctly installed in the readout unit.
- The unit is ready for use once powered on.
3. Operating Instructions
The EZ-View Pro DRO features absolute memory technology, meaning it retains its origin position once set, even after being turned off. When powered on, the display will show the actual sensor position.
3.1 Power On/Off
- Press the ON/OFF button to turn the unit on or off.
3.2 Setting Zero
- Move the sensor head to the desired starting point for your measurement.
- Press the ZERO button to set the current position as zero. The display will show "0.000" (or equivalent in selected units).
3.3 Changing Measurement Units
The DRO supports inch, metric, and fractional readings.
- Press the IN/MM button to toggle between inch and metric units.
- Press the FRAC button to cycle through fractional display modes (e.g., 32nd, 64th, 128th).
3.4 Taking Measurements
- Once zero is set and units are selected, move the sensor head along the sensor bar.
- The display will show the real-time measurement from the set zero point.
- The measuring speed is unlimited, allowing for quick and continuous readings.
4. Maintenance
Proper maintenance ensures the longevity and accuracy of your iGaging EZ-View Pro DRO.
4.1 Cleaning
- Wipe the sensor bar and display unit with a soft, dry, lint-free cloth.
- For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by immediate drying.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the display or the aluminum finish.
4.2 Battery Replacement
When the display becomes dim or erratic, it may be time to replace the batteries.
- Locate the battery compartment on the back of the digital readout unit.
- Open the compartment and remove the old lithium batteries.
- Insert new batteries, ensuring correct polarity.
- Close the battery compartment securely.
4.3 Storage
- Store the DRO in a clean, dry environment, away from direct sunlight and extreme temperatures.
- If storing for extended periods, it is advisable to remove the batteries to prevent leakage.
5. Troubleshooting
This section addresses common issues you might encounter with your iGaging EZ-View Pro DRO.
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low or dead batteries; Incorrect battery installation. | Replace batteries; Ensure batteries are inserted with correct polarity. |
| Readings are erratic or inaccurate. | Sensor bar or sensor head is dirty; Sensor cable is loose or damaged; Mechanical binding of sensor head. | Clean sensor bar and head; Check cable connection, re-seat if necessary; Ensure smooth movement of sensor head along the bar. |
| Unit does not turn on. | No batteries; Completely dead batteries; Faulty unit. | Install new batteries; If problem persists, contact customer support. |
6. Specifications
| Manufacturer | iGaging |
| Part Number | T23013 |
| Item Model Number | T23013 |
| Product Dimensions | 6.35 x 81.92 x 4.45 cm |
| Length (Size) | 610 mm |
| Material | Aluminium |
| Power Source | Battery Powered |
| Battery Type | Lithium |
| Batteries Included | Yes |
| Item Package Quantity | 1 |
| Usage | Professional |
| Item Weight | 900 g |
| Country of Origin | USA |
7. Warranty and Support
For specific warranty information and details regarding product support, please refer to the documentation provided at the time of purchase or contact the manufacturer directly. Warranty terms typically cover defects in materials and workmanship under normal use.
For technical assistance or service inquiries, please contact iGaging customer support through their official website or the contact information provided with your product.