1. Introduction
The Leviton 476TM-624 Twist and Mount Patch Panel is designed for efficient data distribution within structured media centers. This 24-port CAT 6 panel supports high-speed data applications, including Gigabit Ethernet, and integrates seamlessly into existing Leviton structured media enclosures.
Key Features:
- Commercial-grade telephone and data patching capabilities.
- Component-rated CAT 6 ports for optimal performance.
- Connectors feature Leviton's patented Retention Force Technology for secure connections.
- Compact design for space-saving installations.
- Meets ANSI/TIA-570-D bend radius requirements.
- Universal T568A and T568B wiring labels for flexible installation.
- IDC termination with Universal 568A and 568B wiring cards.
- Exceeds IEEE 802.3bt standard up to 0.5 amps per conductor (100 watts) continuously.
2. Setup and Installation
Proper installation ensures optimal performance and longevity of your patch panel. Follow these steps carefully.
2.1 Package Contents
Verify that all components are present before beginning installation:
- Leviton 476TM-624 Twist and Mount CAT 6 24-Port Patch Panel
- Mounting hardware (screws, washers)
- Cable ties or management accessories
- Punch-down tool (may be included or sold separately)
- Labeling strips
Figure 1: Included accessories for the Leviton 476TM-624 Patch Panel.
2.2 Mounting the Patch Panel
The Twist and Mount design allows for easy installation into Leviton Structured Media Centers. Align the panel's mounting tabs with the corresponding slots in the enclosure and twist to secure.
Figure 2: Side view of the patch panel illustrating the twist-mount mechanism.
Figure 3: Angled view of the patch panel, showing its structure and mounting tabs.
2.3 Wiring the Ports
Each port on the patch panel features IDC (Insulation Displacement Connector) terminals for terminating CAT 6 cables. The panel supports both T568A and T568B wiring standards. Refer to the color-coded labels on the IDC blocks for correct wire placement.
- Strip approximately 1 inch of the cable jacket from your CAT 6 cable.
- Untwist the wire pairs as little as possible.
- Align each wire with the corresponding color code on the IDC block (T568A or T568B).
- Use a punch-down tool to firmly seat each wire into its terminal. Trim any excess wire.
- Repeat for all 24 ports.
Figure 4: Rear view of the patch panel with IDC terminals and wiring guides.
Figure 5: Front view of the patch panel showing the 24 CAT 6 ports.
3. Operating Instructions
Once installed and wired, the patch panel serves as a central connection point for your network infrastructure.
3.1 Connecting Network Devices
Use standard RJ45 patch cables to connect network devices (computers, printers, access points) to the front ports of the patch panel. Each port corresponds to a terminated cable run from your network outlets.
3.2 Patching Connections
Connect the patch panel to your network switch or router using additional RJ45 patch cables. This creates the necessary connections between your network devices and the active network equipment.
3.3 Labeling Ports
Utilize the provided labeling strips to clearly identify each port's destination (e.g., "Office 1 Desk," "Living Room TV"). This simplifies network management and troubleshooting.
4. Maintenance
Regular maintenance helps ensure reliable network performance.
- Visual Inspection: Periodically inspect all connections for signs of wear, damage, or loose cables.
- Cleaning: Keep the patch panel free of dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners directly on the ports.
- Cable Management: Ensure patch cables are neatly organized and secured to prevent strain on the ports and accidental disconnections.
5. Troubleshooting
If you experience network issues, consider the following troubleshooting steps:
- No Network Connectivity:
- Verify that both ends of the patch cable are securely connected.
- Check the status lights on your network device and switch/router.
- Test the cable run with a network cable tester to ensure proper termination.
- Confirm the correct T568A or T568B wiring standard was used consistently.
- Slow Network Speeds:
- Ensure all cables are CAT 6 rated for optimal performance.
- Check for excessive cable bends or damage that could degrade signal quality.
- Verify that network devices are configured for Gigabit Ethernet if applicable.
- Loose Connections:
- Gently reseat patch cables in the ports.
- For IDC terminations, ensure wires are fully seated using a punch-down tool.
6. Specifications
| Model Number | 476TM-624 |
| Ports | 24 Port(s) |
| Category | CAT 6 |
| Wiring Code | T568A/T568B |
| Dimensions (W x D x H) | 6 inches x 1.5 inches x 7 inches (Approximate, based on description) |
| Item Weight | 1.04 pounds |
| Material | 18 Gauge Steel (main body), Black ABS Plastic (bracket) |
| Mounting | Bracket Mounting (Twist and Mount) |
| Approvals | UL (Canada and US) |
7. Warranty and Support
7.1 Warranty Information
This Leviton product is covered by a manufacturer's warranty. For specific details regarding warranty duration and terms, please refer to the documentation included with your purchase or visit the official Leviton website.
7.2 Customer Support
For technical assistance, installation questions, or warranty claims, please contact Leviton Customer Support. You can find contact information on the official Leviton website or through the retailer where the product was purchased.
Leviton Official Website: www.leviton.com