Product Overview
Red Devil Pre-Mixed Tile Grout is an acrylic-based white grout specifically formulated for use on ceramic and mosaic tile. This unique grouting composition offers professional quality with do-it-yourself ease, formulated to a user-friendly consistency for improved durability. It is designed for both new installations and repair work.
Image: Red Devil Pre-Mixed Tile Grout in a 1/2 Pint container.
Key Features:
- Excellent Adhesion: Adheres to all types of ceramic and mosaic tile.
- Versatile Use: Suitable for use on walls and floors, adhering to tile, masonry, wood, and wallboard.
- Easy to Use: Formulated to a user-friendly consistency for straightforward application.
- Water Cleanup: Cleans up easily with soap and water.
- Stain and Water Resistant: Provides a durable finish that resists stains and water.
- Made in the USA: Proudly manufactured in Pryor, Oklahoma.
Setup and Surface Preparation
Proper surface preparation is crucial for optimal adhesion and longevity of the grout. Ensure the area is clean, dry, and free of loose debris.
For New Tile Installations:
- Ensure all tiles are securely set and the adhesive has fully cured according to its manufacturer's instructions.
- Clean any excess adhesive from the grout lines.
- The grout lines should be clean and dry before application.
For Existing Tile (Regrouting/Repairs):
- Remove approximately 1/16 inch of the old grout using a grout rake or appropriate tool.
- Thoroughly scrub the surface of the tile and grout lines with a tile cleaner to remove any dirt, mildew, or residue.
- Rinse the area thoroughly with clean water and allow it to dry completely before applying new grout.
Video: Official Red Devil "Pre-Mixed Tile Grout" application guide. This video demonstrates the process of applying the pre-mixed grout for both new installations and repairs, including surface preparation, application techniques, and cleanup.
Application Instructions
Red Devil Pre-Mixed Tile Grout is ready to use directly from the container. No mixing is required.
- Apply Grout: Using a grout float or a suitable applicator, apply the grout to the tile surface, working it into each joint thoroughly. Ensure all gaps are filled completely.
- Work In and Finish: Work the grout into the joints with a sponge or grout float. For new installations, finish the joints with a grout float to achieve a smooth, uniform appearance.
- Initial Cleanup (15 minutes): After approximately 15 minutes, once the grout has begun to set up, remove any excess grout from the top of the tiles with a damp sponge. Wipe diagonally across the tiles to avoid pulling grout from the joints.
- Final Polish (1 hour): Wait about one hour after initial cleanup, then polish and buff the tiles with a clean, dry cloth to remove any remaining haze and achieve a clean finish.
- Curing Time: Allow the grout to cure for 48 hours before applying any grout sealer or exposing the area to heavy moisture or traffic.
Image: Red Devil Pre-Mixed Tile Grout shown with common application tools like a grout float and sponge.
Maintenance
To maintain the appearance and performance of your grouted surfaces:
- Cleaning: For routine cleaning, use mild soap and water. Avoid harsh abrasive cleaners or strong chemicals that could damage the grout.
- Spills: Wipe up spills promptly to prevent staining, especially with acidic or colored liquids.
- Storage: Store any unused grout in its original, tightly sealed container in a cool, dry place to prevent it from drying out.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Grout is too thick/hard to work with. | Container not sealed properly, or stored in a warm environment. | Ensure container is tightly sealed after each use. Store in a cool, dry place. For slightly stiff grout, try stirring it thoroughly. If it's too dry, it may not be usable. |
| Grout appears off-white or discolored after drying. | Incomplete cleaning of tile surface or old grout residue; environmental factors. | Ensure thorough cleaning of the surface and grout lines before application. Allow adequate drying time. Some environmental factors or underlying surface colors can subtly affect the final appearance. |
| Grout cracking or crumbling. | Insufficient application, movement in substrate, or improper curing. | Ensure grout lines are completely filled. Verify substrate stability. Allow full 48-hour cure time before exposing to stress. Reapply grout to affected areas if necessary. |
Product Specifications
| Specification | Detail |
|---|---|
| Brand | Red Devil |
| Model Number | 0422 |
| Material | Acrylic |
| Color | White |
| Size | 1/2 Pint (236 mL) |
| Product Dimensions (L x W x H) | 3 x 3 x 3.25 inches |
| Item Weight | 1.6 ounces |
| Manufacturer | Red Devil Inc. |
| First Available Date | April 27, 2012 |
Warranty and Support
Red Devil, Inc. is a privately-owned family business committed to providing quality, innovative, and valuable products. For many years, Red Devil has offered a lifetime guarantee on its products, standing behind every single one.
For further support, product information, or to explore other Red Devil products, please visit the official Red Devil Brand Store:
Visit the Red Devil Brand Store
Video: "About Red Devil" - This video provides insight into Red Devil's commitment to quality, innovation, and value, highlighting their manufacturing processes and dedication to customer satisfaction.