1. Introduction
Thank you for purchasing the Sangean WR-2CL FM-Stereo RBDS/AM Digital Tuning Portable Receiver. This receiver features a clear, transparent polyurethane cabinet, offering a unique aesthetic while delivering high-quality audio. It is equipped with a PLL Synthesized Tuning System for precise station selection and an easy-to-read LCD display.
This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use to ensure optimal performance and longevity.
Key Features:
- Transparent Polyurethane Cabinet
- 10 Memory Preset Stations (5 FM/5 AM)
- Easy-to-Read LCD Display
- PLL Synthesized Tuning System
- Clock Function
- Adjustable Sleep Timer and Snooze Function
- Bass Compensation for Richer Bass
- Rotary Bass and Treble Control
- 3" 7W Full Range Speaker with Enlarged Magnet
- 9-15 Voltage Power Adapter Jack for Vehicle Power
- External AM Antenna Terminal
- Stereo Headphone Jack
- REC-Out
2. Setup
2.1 Power Connection
Connect the supplied AC power cord to the AC INPUT jack on the rear of the receiver and then plug it into a standard 120V 60Hz wall outlet. The unit can also be powered by a 9-15V DC power adapter (not included) via the DC IN jack for vehicle use.
2.2 Antenna Connection
For optimal reception, connect the included FM antenna to the FM ANTENNA terminal on the rear panel. For AM reception, connect the included AM antenna to the AM EXT. terminals. Ensure the INTERNAL/EXTERNAL antenna switch is set to the appropriate position.
2.3 Audio Connections
- Aux-in: Connect external audio devices (e.g., MP3 player) to the AUX IN jack using a 3.5mm audio cable.
- Headphones: For private listening, plug stereo headphones into the STEREO HEADPHONE JACK.
- Subwoofer Out: Connect an external subwoofer to the SUBWOOFER OUT jack for enhanced bass.
- REC-Out: Use the REC-OUT jack to connect to a recording device.
3. Operating Instructions
3.1 Power On/Off and Source Selection
Press the POWER/VOLUME knob to turn the unit on or off. Press the SOURCE button repeatedly to cycle through available audio sources: FM, AM, USB, Bluetooth, and Aux-in.
3.2 Tuning and Volume Control
- Tuning: Rotate the TUNING knob to manually select radio frequencies. For automatic station seeking, press the SEEK/SELECT button.
- Volume: Rotate the POWER/VOLUME knob to adjust the audio output level.
3.3 Preset Stations
The receiver allows you to store up to 10 favorite stations (5 FM, 5 AM). To store a station, tune to the desired frequency, then press and hold one of the preset number buttons (1-5) until the display confirms storage. To recall a preset station, simply press the corresponding preset number button.
3.4 Tone Control and Dimmer
- Bass and Treble: Use the dedicated ROTARY BASS AND TREBLE CONTROL knobs to fine-tune the audio's bass and treble levels according to your preference.
- Dimmer: Rotate the DIMMER knob to adjust the brightness of the LCD display.
3.5 Bluetooth Pairing
To pair a Bluetooth device, select the Bluetooth source mode. The display will indicate 'Pairing'. On your mobile device, search for 'SANGEAN WR-2CL' and select it to connect. Once paired, you can stream audio wirelessly to the receiver.
4. Specifications
| Feature | Detail |
|---|---|
| Display | LCD, Graphic 128 x 64 |
| View Area | 3.5" x 2.16" |
| Earphones Output | 5 + 5 mW |
| Power Supply | 120V 60 Hz (AC) / 9-15V (DC) |
| Dimensions (WxHxD) | 9.45" x 4.41" x 7.61" |
| Weight | 5 lbs 10.6 oz |
| Tuner Technology | AM/FM (PLL Synthesized) |
| Connectivity Technology | Auxiliary, Bluetooth |
| Speaker | 3" 7W Full Range Speaker |
5. Maintenance
To ensure the longevity and optimal performance of your Sangean WR-2CL receiver, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners, waxes, or solvents as they may damage the cabinet finish.
- Ventilation: Ensure adequate ventilation around the receiver. Do not block any ventilation openings.
- Placement: Place the unit on a stable, level surface away from direct sunlight, heat sources, and excessive moisture.
- Power Cord: Regularly inspect the power cord for any damage. If damaged, discontinue use and replace with an approved cord.
6. Troubleshooting
If you encounter any issues with your Sangean WR-2CL, refer to the following common troubleshooting steps:
- No Power: Ensure the AC power cord is securely plugged into both the receiver and a working wall outlet. If using DC power, verify the adapter is correctly connected and providing the correct voltage.
- Poor Radio Reception: Extend and adjust the FM antenna for better FM reception. For AM, ensure the AM antenna is properly connected and positioned away from electronic devices that may cause interference. Try adjusting the INTERNAL/EXTERNAL antenna switch.
- No Audio from External Device (Aux-in/Bluetooth): Verify that the correct source is selected on the receiver. Check the volume level on both the receiver and the external device. For Bluetooth, ensure the device is properly paired.
- No Sound from Headphones: Ensure headphones are fully inserted into the jack. Adjust the volume.
If problems persist after trying these steps, please contact Sangean customer support.
7. Warranty and Support
7.1 Warranty Information
Your Sangean WR-2CL receiver comes with a limited warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and registration details. Keep your purchase receipt as proof of purchase for warranty claims.
7.2 What's in the Box
- Sangean WR-2CL Receiver
- Owner's Manual
- AC Power Cord
- FM Antenna
- AM Antenna
7.3 Customer Support
For further assistance, technical support, or service inquiries, please visit the official Sangean website or contact their customer service department using the information provided in your warranty documentation.
