Zurn Z1330-C Moderate Climate Encased Wall Hydrant Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Zurn Z1330-C Moderate Climate Encased Wall Hydrant. The Z1330-C is designed for commercial applications, featuring a durable construction with a chrome-plated brass box and a stainless-steel face plate. It includes a self-draining mechanism and a vandal-resistant integral vacuum breaker, making it suitable for environments such as office buildings, apartment complexes, malls, shopping centers, and schools. Please read these instructions thoroughly before proceeding with installation or operation to ensure proper function and safety.

Figure 1: Zurn Z1330-C Moderate Climate Encased Wall Hydrant. This image shows the compact design of the wall hydrant, featuring its chrome-plated brass box and stainless-steel face plate, ready for installation.

2. Safety Information

Always observe local plumbing codes and regulations during installation. Failure to do so may result in property damage or personal injury.

• Ensure water supply is turned off before beginning any installation or maintenance.
• Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
• If you are unsure about any part of the installation process, consult a qualified plumber.
• Do not modify the product in any way, as this may void the warranty and compromise safety.
• This product is designed for moderate climates. Ensure it is installed in an environment consistent with its design specifications to prevent freezing and damage.

3. Components

The Zurn Z1330-C wall hydrant typically includes the following main components:

• Chrome-Plated Brass Box: Provides protection and aesthetic finish.
• Stainless-Steel Face Plate: Durable and corrosion-resistant exterior.
• Self-Draining Mechanism: Prevents freezing by allowing water to drain from the hydrant body after use.
• Vandal-Resistant Integral Vacuum Breaker: Protects against back-siphonage and tampering.
• Operating Key/Handle: For turning the water supply on and off. (Note: May be sold separately or included depending on specific model variant.)
• Standard Inlet Connection: For connecting to the building's water supply.

4. Setup and Installation

Proper installation is crucial for the performance and longevity of your Zurn Z1330-C wall hydrant.

1. Site Preparation: Choose a suitable location on an exterior wall, ensuring adequate clearance for operation and maintenance. The hydrant should be positioned to allow for proper drainage away from the building foundation.
2. Wall Opening: Create an opening in the wall appropriate for the hydrant's dimensions, ensuring it is level and plumb.
3. Water Supply Connection: Connect the hydrant's standard inlet connection to the building's water supply line. Use appropriate plumbing fittings and sealants to ensure a watertight connection.
4. Mounting: Secure the hydrant body to the wall structure using appropriate fasteners. Ensure the stainless-steel face plate is flush with the exterior wall surface.
5. Testing: Slowly turn on the main water supply and check for any leaks at all connection points. Operate the hydrant to ensure water flows freely and the self-draining mechanism functions correctly after shut-off.
6. Insulation (if required): While designed for moderate climates, additional insulation around the supply line within the wall cavity may be beneficial in colder parts of moderate climate zones.

5. Operating Instructions

The Zurn Z1330-C wall hydrant is designed for simple and reliable operation.

1. To Turn On: Insert the operating key (if applicable) or turn the handle clockwise until water flows from the spout.
2. To Turn Off: Turn the operating key or handle counter-clockwise until the water flow stops completely. The self-draining feature will then activate, allowing water to drain from the hydrant body.
3. Post-Operation: Ensure the hydrant is fully closed after each use to allow the self-draining mechanism to function and prevent potential freezing or damage.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your wall hydrant.

• Annual Inspection: Annually inspect the hydrant for any signs of wear, leaks, or damage. Check the integrity of the face plate and the operating mechanism.
• Vacuum Breaker Check: Periodically check the integral vacuum breaker for proper function. Ensure it is not obstructed and allows air to enter the system when the water is shut off.
• Cleaning: Clean the exterior of the hydrant with a mild soap and water solution. Avoid abrasive cleaners that could damage the chrome or stainless-steel finish.
• Winterization (Optional for colder moderate climates): While self-draining, in areas experiencing colder temperatures within the moderate climate range, it is advisable to disconnect any hoses and ensure the hydrant is fully drained before the first freeze.

7. Troubleshooting

8. Specifications

• Model Number: Z1330-C
• Product Dimensions: 6.5 x 6.75 x 6.5 inches
• Item Weight: 6 pounds
• Manufacturer: Zurn Industries
• Features: Self-draining, vandal-resistant integral vacuum breaker, chrome-plated rough bronze box, stainless-steel face plate.
• Recommended Applications: Commercial (office buildings, apartment complexes, malls, shopping centers, schools).

9. Warranty and Support

The Zurn Z1330-C Moderate Climate Encased Wall Hydrant is backed by a 1-year warranty from the date of purchase, covering defects in materials and workmanship.

For technical assistance, replacement parts, or warranty claims, please contact Zurn Customer Service.

Zurn Industries LLC
www.zurn.com
(Refer to the official Zurn website for current contact information and support resources.)