Carrera 30356

Carrera Digital 132/124 Pit Lane Instruction Manual

Model: 30356 | Brand: Carrera

1. Product Overview

The Carrera Digital 132/124 Pit Lane is an accessory designed to enhance your digital slot car racing experience by allowing cars to exit the main track for a pit stop. This unit is compatible exclusively with Carrera Digital 124 and Digital 132 sets and requires a Control Unit 30352 or Black Box 30344 (sold separately) for operation. It integrates seamlessly into your existing track layout to add strategic pit stop elements to your races.

Carrera Digital 132/124 Pit Lane track section

Image 1: The Carrera Digital 132/124 Pit Lane track section, featuring the entry and exit points for pit stops.

2. Package Contents

Upon opening the package, verify that all components are present and undamaged.

Note: The Control Unit (30352) or Black Box (30344) is required for operation and is sold separately.

3. Setup and Installation

Proper installation of the Pit Lane is crucial for its functionality within your Carrera Digital track system.

  1. Connect to Control Unit: Ensure your Carrera Digital 132 or 124 track system is equipped with a Control Unit (30352) or a Black Box (30344). The Pit Lane must be connected to one of these units.
  2. Assemble Track Sections: The Pit Lane consists of several components:
    • Pit lane entry switch
    • Pit lane exit switch
    • Standard straight track section
    • Single-track straights
    • Pitstop adapter unit with end pieces
    Assemble these parts according to your desired track layout, ensuring secure connections between all track pieces.
  3. Integrate into Track: Place the assembled Pit Lane section onto your racing track. The design allows for a car to divert from the main track into the pit area and then rejoin the main track. Refer to your overall track layout instructions for optimal placement.
  4. Power Connection: Ensure the Control Unit or Black Box is correctly powered and connected to the entire track system.

Important: For advanced functions like Pace Car and fueling, two complete Pit Stop Lanes may be required. Additionally, a standard straight track section must be placed between the exit of the first Pit Lane and the entrance of a second Pit Lane for proper functionality.

4. Operating the Pit Lane

The Pit Lane adds a strategic dimension to your races, allowing for simulated pit stops for refueling or repairs.

  1. Digital Speed Control: The Pit Lane functionality primarily works with cable digital speed controls. Wireless controls may not fully support all pit lane features.
  2. Initiating a Pit Stop: During a race, when your car requires a pit stop (e.g., indicated by flashing headlights if fuel simulation is active), guide your car into the pit lane entry.
  3. Performing the Pit Stop: Once in the pit lane, press the "Change Lane" button on your digital speed controller. Hold the button for the desired duration of the pit stop (typically 5 to 10 seconds, depending on your race settings and fuel consumption).
  4. Exiting the Pit Lane: After the pit stop duration, release the "Change Lane" button, and your car will rejoin the main track.

Tip: For full utilization of fuel features and enhanced race management, consider integrating the Carrera Driver Display and the Race Control-App with your system.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Carrera Pit Lane.

6. Troubleshooting

If you encounter issues with your Pit Lane, refer to the following common solutions:

ProblemPossible Cause / Solution
Car does not enter/exit Pit Lane correctly.
  • Ensure track connections are secure.
  • Verify the Pit Lane entry/exit switches are properly aligned.
  • Check if the car's guide keel is clean and undamaged.
Pit Lane functions (e.g., refueling) are not working.
  • Confirm the Pit Lane is connected to a Carrera Control Unit (30352) or Black Box (30344).
  • Ensure you are using a cable digital speed control, as some wireless controls may have limited compatibility.
  • Check if the "Change Lane" button on your controller is functioning correctly.
  • Verify that fuel simulation settings are enabled on your Control Unit.
Advanced functions (Pace Car, complex fueling) are not available.
  • These functions may require two complete Pit Stop Lanes.
  • A standard straight track section must be placed between the exit of the first Pit Lane and the entrance of a second Pit Lane.
  • Consider adding a Driver Display for full utilization of fuel features.

7. Technical Specifications

Model Number30356
ASINB003IT5QDQ
Product Dimensions16.22 x 2.36 x 8.15 inches
Item Weight1.32 pounds
ManufacturerCarrera
Recommended Age8 years and up
Release DateFebruary 7, 2017
CompatibilityCarrera Digital 124 and Digital 132 systems
Required Accessories (Sold Separately)Control Unit 30352 or Black Box 30344

8. Warranty and Support

For warranty information, technical support, or replacement parts, please contact Carrera customer service. Refer to the official Carrera website or product packaging for the most current contact details and warranty terms applicable to your region.

You can often find additional resources, FAQs, and support information on the official Carrera website: www.carrera-toys.com