Product Overview
This DIRECTV Universal Remote Control is designed to manage up to four components, including a DIRECTV Receiver, a television, and two additional stereo or video devices such as a DVD player or a second TV. Its advanced design allows for the consolidation of multiple original remote controls into a single, user-friendly unit. Key features include a four-position mode slide switch for easy component selection, an extensive code library for various video and stereo components, a code search function for older or discontinued devices, and memory protection to retain programming even when batteries are replaced.
Image: A light grey universal remote control with a black base, featuring a central yellow 'SELECT' button, various function buttons, a numeric keypad, and the DirecTV logo at the bottom right. This remote is designed for intuitive control of multiple entertainment devices.
Key Features
- Works with all DIRECTV receivers.
- Operates all features of the DIRECTV Receiver.
- Updated, extensive universal code library ensures compatibility with most audio/video devices.
- Replaces lost or broken remotes.
- Uses 2 AA batteries (not included).
Setup Guide
Battery Installation
The RC65 remote control requires two (2) AA batteries for operation. Ensure correct polarity when inserting the batteries.
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover off.
- Insert two (2) AA batteries, matching the (+) and (-) terminals as indicated inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Programming Your Remote
To control your devices (TV, DVD, etc.), the remote must be programmed with the correct codes. The RC65 supports direct code entry and code search methods.
- Direct Code Entry: Consult your DIRECTV receiver's on-screen menu or the Audiovox website for a list of programming codes specific to your device brands.
- Code Search: If a direct code is not found, the remote can search for the correct code. This process typically involves holding down a specific button combination (e.g., MUTE and SELECT) until an indicator light flashes, then entering a search code or repeatedly pressing the POWER button until the device turns off.
Always ensure the mode slide switch at the top of the remote is set to the correct device (e.g., TV, AV1, AV2) before attempting to program or operate that device.
Operating Your Remote
Component Selection
Use the four-position mode slide switch located at the top of the remote to select the component you wish to control:
- DIRECTV: For controlling your DIRECTV receiver.
- TV: For controlling your television.
- AV1: For controlling the first auxiliary audio/video component (e.g., DVD player, VCR).
- AV2: For controlling the second auxiliary audio/video component.
Basic Functions
Once the desired component is selected, use the corresponding buttons for control:
- PWR (Power): Turns the selected component on or off.
- VOL +/- (Volume): Adjusts the volume of the selected component.
- CHAN PAGE +/- (Channel/Page): Changes channels or navigates pages.
- GUIDE: Displays the program guide for the DIRECTV receiver.
- MENU: Accesses the menu of the selected component.
- INFO: Displays information about the current program or selection.
- SELECT: Confirms a selection or enters a menu item.
- Navigation Arrows (Up, Down, Left, Right): Navigates through menus and options.
- Numeric Keypad (0-9, DASH, ENTER): Enters channel numbers or other numerical inputs.
- REC (Record): Initiates recording on compatible DIRECTV receivers.
- LIST: Displays recorded programs or a list of options.
- EXIT: Exits current menu or screen.
- BACK: Returns to the previous screen or menu.
- PREV: Returns to the previous channel.
Maintenance
Battery Replacement
When the remote's performance degrades or buttons become unresponsive, it is likely time to replace the batteries. Follow the battery installation steps outlined in the Setup Guide.
Cleaning
To clean your remote control, gently wipe the surface with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these can damage the remote's finish or internal components.
Troubleshooting
- Remote not responding: Ensure the mode slide switch is set to the correct component. Check if the batteries are inserted correctly and have sufficient charge. Ensure there is a clear line of sight between the remote and the device's infrared sensor.
- Cannot control a specific device: The remote may not be programmed correctly for that device. Attempt to re-program the remote using a different code from the code library or by performing a code search.
- Some buttons not working: This could indicate low batteries or dirt/debris under the buttons. Try replacing the batteries. If the issue persists, gently clean around the buttons.
- Remote indicator light not flashing: This usually means the batteries are completely drained or incorrectly inserted. Replace batteries.
Product Specifications
| Specification | Detail |
|---|---|
| Model Number | RC65 |
| Brand | Audiovox |
| Product Dimensions | 10.9 x 1.6 x 4.6 inches |
| Item Weight | 1 ounces |
| Batteries Required | 2 AA batteries (not included) |
| Max Number of Supported Devices | 4 |
| Compatible Devices | Television, DIRECTV Receiver, Stereo/Video Components |
| Special Feature | Universal Infrared (IR) |
| Color | Grey |
Warranty and Support
For information regarding warranty coverage, technical support, or replacement parts for your Audiovox RC65 Universal Remote Control, please refer to the documentation provided at the time of purchase or visit the official Audiovox support website. Contact information for customer service is typically available on the manufacturer's website.
