Winco WKCS-18 Stainless Steel Wok Cover, 17-3/4-Inch User Manual

1. Product Overview

The Winco WKCS-18 is a durable stainless steel wok cover designed to fit woks with a diameter of approximately 17-3/4 inches. This cover helps to retain heat, steam food, and prevent splattering during cooking, enhancing the efficiency and cleanliness of your culinary tasks. Its robust construction ensures longevity and ease of maintenance.

Figure 1.1: The Winco WKCS-18 Stainless Steel Wok Cover. This image shows the round, domed stainless steel cover with a handle on top, designed for use with woks.

2. Safety Instructions

• Always use oven mitts or a heat-resistant cloth when handling the wok cover during or immediately after cooking, as it can become very hot.
• Ensure the wok cover is properly seated on the wok to prevent steam from escaping unexpectedly, which could cause burns.
• Do not use the wok cover in a microwave oven.
• Keep out of reach of children when hot.
• Inspect the cover for any damage before each use. Discontinue use if significant damage is observed.

3. Setup

1. Unpacking: Carefully remove the wok cover from its packaging.
2. Initial Cleaning: Before first use, wash the wok cover thoroughly with warm, soapy water. Rinse completely and dry with a soft cloth to prevent water spots.
3. Inspection: Check the cover for any manufacturing defects or shipping damage.

4. Operating Instructions

The Winco WKCS-18 wok cover is designed for straightforward use to enhance your cooking experience.

• Placement: Position the wok cover directly over your wok, ensuring it sits securely on the rim. The 17-3/4-inch diameter is designed for a snug fit on compatible woks.
• Heat Retention: Use the cover to trap heat and steam inside the wok, which is ideal for simmering, braising, or keeping food warm.
• Splatter Prevention: The cover effectively contains oil and food splatters, keeping your stovetop clean.
• Lifting: Always use the handle provided to lift the cover. Be cautious of accumulated steam and hot condensation when removing the cover.

5. Care and Maintenance

Proper care will ensure the longevity and performance of your Winco wok cover.

• Cleaning: The wok cover is dishwasher safe. For hand washing, use warm water and a mild dish soap. Avoid abrasive cleaners or scouring pads that could scratch the stainless steel surface.
• Drying: Dry the cover immediately after washing to prevent water spots and maintain its luster.
• Storage: Store the wok cover in a dry place, away from excessive moisture, to prevent corrosion.

6. Troubleshooting

• Cover does not fit: Ensure your wok's diameter is compatible with a 17-3/4-inch cover. Measure your wok's opening carefully.
• Water spots after washing: This is common with stainless steel. To prevent, dry immediately after washing or use a stainless steel cleaner/polish.
• Discoloration: High heat can sometimes cause slight discoloration on stainless steel. This is typically cosmetic and does not affect performance.

7. Specifications

8. Warranty and Support

Winco products are manufactured to high standards. For specific warranty information or customer support, please refer to the official Winco website or contact their customer service department. Keep your purchase receipt for any warranty claims.

Note: This manual provides general instructions. Product specifications and features are subject to change without notice.