1. Introduction
The Behringer Europower PMP6000 is a powerful and versatile 20-channel powered mixer designed for live sound applications. It integrates a mixer, dual multi-effects processor, and a 1600-Watt Class-D amplifier into a single, compact unit. This manual provides essential information for setting up, operating, and maintaining your PMP6000 to ensure optimal performance and longevity.
Figure 1: Front view of the Behringer Europower PMP6000 Powered Mixer, showing all channels, controls, and inputs/outputs.
2. Key Features
- Powerful Amplifier: Ultra-compact 2 x 800-Watt stereo powered mixer (1600 Watt bridged mode) utilizing revolutionary Class-D amplifier technology for enormous power and super-light weight.
- Comprehensive Mixer Section: 20-channel mixer featuring 12 mono and 4 stereo channels, plus separate CD/Tape input/output.
- Dual FX Processors: Two studio-grade 24-bit stereo FX processors with 100 presets including reverb, chorus, flanger, delay, pitch shifter, and various multi-effects.
- FBQ Feedback Detection System: Instantly reveals critical frequencies for easy feedback removal.
- XENYX Mic Preamps: 12 high-quality XENYX Mic Preamps with switchable +48 V phantom power for condenser microphones.
- Channel EQ and Filters: Effective, extremely musical 3-band EQ, switchable Low cut filter, and Clip LEDs on all mono channels.
- Graphic EQ: Stereo 7-band graphic EQ for precise frequency correction of monitor or main outputs.
- Voice Canceller: Function to remove singer's voice from recordings for karaoke applications.
- Flexible Operation Modes: Selectable stereo (main L/R), double mono (main/monitor), or bridged mono amplifier operation mode.
- Speaker Processing: Adjusts frequency response to match professional speaker systems.
- Standby Switch: Mutes all mic input channels during breaks while background music is provided via CD/Tape input.
- XPQ 3D Stereo Surround Effect: For enhanced stereo image.
Figure 2: Angled view of the Behringer Europower PMP6000, highlighting the control panel and side handles.
3. Setup
3.1 Initial Connections
Before powering on the unit, ensure all connections are made correctly. The PMP6000 is designed for easy setup, integrating all necessary components for a complete sound system.
- Microphones: Connect dynamic or condenser microphones to the XLR inputs (channels 1-12). Activate +48V phantom power for condenser microphones using the dedicated switch.
- Instruments/Line Sources: Connect instruments or other line-level sources to the 1/4" inputs on mono channels or the stereo channels (13-20).
- External Audio Playback: Use the CD/TAPE IN RCA inputs to connect external stereo signals from CD players or tape decks for background music or playback.
- Speakers: Connect your passive speakers to the powered outputs using Speakon-compatible cables. Ensure the amplifier operation mode (stereo, double mono, or bridged mono) is set according to your speaker configuration.
- Recording Devices: Use the CD/TAPE OUT RCA outputs to send line-level signals from the mixer to a recording device.
- Monitor Systems: Connect monitor power amps or active monitor speakers to the MON SOUND output for stage monitoring.
3.2 Power Connection
Connect the supplied power cable to the PMP6000's power inlet and then to a suitable AC power outlet. The internal switch-mode power supply ensures noise-free audio and low power consumption.
4. Operating Instructions
4.1 Channel Operation
Each channel on the PMP6000 offers dedicated controls for optimal sound shaping:
- Gain Control: Adjust the input sensitivity for each microphone or instrument. Monitor the Clip LEDs to prevent signal overload.
- EQ Section: Use the 3-band EQ (High, Mid, Low) on mono channels to adjust the tonal characteristics. The Low cut filter can be engaged to eliminate unwanted infrasonics.
- FX Sends: Route signals to the internal effects processors using the FX send controls.
- Faders: Control the individual channel volume levels.
4.2 Effects Processing
The PMP6000 features two independent 24-bit FX processors. Select from 100 digital effect presets (e.g., delay, chorus, reverb) and apply them to any channel, as well as to the monitors and main output. A footswitch jack is available for remote on/off control of the FX processors.
4.3 FBQ Feedback Detection System
To eliminate feedback, press the FBQ button. The red LEDs on the 7-band graphic EQ will illuminate, indicating the frequencies causing feedback. Adjust the corresponding EQ sliders downwards to remove the feedback without compromising overall sound quality.
4.4 Special Functions
- Voice Canceller: Engage this switch when playing music through the CD/TAPE inputs to reduce or remove the lead vocals, ideal for karaoke.
- Standby Switch: Mutes all microphone input channels during breaks, allowing background music to play through the CD/TAPE input without microphone interference.
- XPQ 3D Stereo Surround Effect: Activate this feature for a wider and more immersive stereo image.
5. Maintenance
Proper maintenance ensures the longevity and reliable performance of your Behringer Europower PMP6000.
- Cleaning: Regularly wipe the unit with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or controls.
- Ventilation: Ensure the ventilation openings are clear and unobstructed to prevent overheating. Do not operate the unit in confined spaces without adequate airflow.
- Storage: When not in use, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures.
- Transportation: When transporting the unit, use appropriate cases or packaging to protect it from physical damage.
6. Troubleshooting
This section addresses common issues you might encounter with your PMP6000. For more complex problems, contact Behringer support.
- No Sound Output:
- Check all cable connections (input, output, speaker).
- Ensure channel faders, main faders, and master volume are up.
- Verify that the Standby switch is not engaged.
- Confirm speakers are connected correctly and functioning.
- Feedback (High-pitched Squeal):
- Utilize the FBQ Feedback Detection System to identify and cut problematic frequencies on the graphic EQ.
- Reduce microphone gain or move microphones further from speakers.
- Distorted Sound:
- Check Clip LEDs on channels; reduce gain if they are frequently lighting up.
- Ensure master output levels are not too high, causing amplifier clipping.
- Verify speaker impedance matches the amplifier's requirements.
- Effects Not Working:
- Ensure FX send controls on channels are turned up.
- Check the FX return levels.
- Verify that an effect program is selected and active.
7. Specifications
Figure 3: Dimensions of the Behringer Europower PMP6000, showing a height of approximately 20 inches (50 cm).
| Specification | Value |
|---|---|
| Brand | Behringer |
| Model Number | PMP6000 |
| Item Weight | 35.6 pounds (16.15 kg) |
| Product Dimensions | 23.46 x 19.53 x 4.8 inches (59.6 x 49.6 x 12.2 cm) |
| Mixer Channel Quantity | 20 |
| Output Wattage | 1000 Watts (RMS) / 1600 Watts (Bridged Mode) |
| Power Source | Corded Electric |
| Wattage (Consumption) | 1050 watts |
| Color Name | Black |
| Connectivity Technology | Speakon-compatible |
| First Available Date | April 30, 2010 |
8. Warranty and Support
Information regarding the specific warranty terms and conditions for the Behringer Europower PMP6000 was not available in the provided product data. For detailed warranty information, technical support, or service inquiries, please refer to the official Behringer website or contact their customer support directly.
No official product videos from the seller were found in the provided data.
