Introduction
This manual provides essential instructions for the safe and efficient use of your PWR+ USB-C Laptop Car Charger Power Adapter. Please read this manual thoroughly before using the product and retain it for future reference.
Image: The PWR+ USB-C Laptop Car Charger Power Adapter, featuring the main charging unit, a car cigarette lighter plug, and a USB-C connector. A blue indicator light is visible on the main unit.
Product Overview
The PWR+ USB-C Laptop Car Charger is designed to provide reliable power to a wide range of USB-C compatible devices, including laptops, tablets, and smartphones, directly from your vehicle's 12V-24V power outlet.
Key Features:
- Output Max: 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 4.5A (30W, 45W, 61W, 65W, 85W, 90W)
- Input Voltage: 12V-24V DC
- Cable Length: Extra long 10 ft power cord for flexible placement.
- Safety Certifications: UL Listed, ensuring tested and approved safety standards.
- Built-in Safety Protections: Includes Short Circuit Protection (SCP), Over Current Protection (OCP), Over Voltage Protection (OVP), and Over Temperature Protection (OTP).
Image: Diagram illustrating the internal construction of the power cable with high-grade copper, aluminum foil shield, PVC jacket, and wire insulation. Also shown are icons representing built-in safety protections: Short Circuit Protection (SCP), Over Current Protection (OCP), Over Voltage Protection (OVP), and Over Temperature Protection (OTP).
Setup Instructions
- Vehicle Power Outlet: Ensure your vehicle's 12V-24V power outlet (cigarette lighter socket) is clean and free from debris.
- Connect to Vehicle: Insert the car charger plug firmly into your vehicle's 12V-24V power outlet. The charger's indicator light should illuminate, confirming power connection.
- Connect to Device: Plug the USB-C connector into the USB-C charging port of your laptop, tablet, or other compatible device.
- Verify Charging: Confirm that your device indicates it is receiving power and charging.
Image: A person operating a laptop in a car, with the PWR+ car charger connected to the vehicle's power outlet and the laptop, demonstrating typical usage.
Operating Instructions
Once connected, the PWR+ USB-C Laptop Car Charger will automatically begin charging your compatible device. The charger is designed for continuous use during vehicle operation.
- For optimal charging, ensure your vehicle's engine is running.
- Avoid disconnecting the charger abruptly from the device during critical operations.
- The charger's intelligent design automatically adjusts power output (30W to 90W) based on the connected device's requirements.
Safety Information
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT INTERCONNECT OUTPUT TERMINATIONS.
- Use this product only with compatible USB-C devices that require 90W or less.
- Do not expose the charger to moisture, extreme temperatures, or direct sunlight.
- Do not disassemble, modify, or attempt to repair the charger. Refer servicing to qualified personnel.
- Keep out of reach of children.
- Ensure proper ventilation around the charger during use to prevent overheating.
- If the charger shows signs of damage (e.g., frayed cables, cracked casing), discontinue use immediately.
Image: A close-up of the product label, displaying model number PWR-CE90PD, input/output specifications, and a prominent safety warning regarding interconnecting output terminations.
Maintenance
- Cleaning: Disconnect the charger from both the vehicle and the device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and moisture.
- Cable Care: Avoid sharp bends or kinks in the cable. Do not pull the cable to disconnect; always grasp the plug.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger indicator light is off. | No power from vehicle outlet; loose connection; vehicle engine off. | Ensure vehicle engine is running. Check connection to vehicle outlet. Test outlet with another device. |
| Device not charging. | Loose USB-C connection; incompatible device; device requires more power than charger provides. | Ensure USB-C cable is firmly connected to both charger and device. Verify device compatibility and power requirements. |
| Slow charging. | Device drawing maximum power; background applications running; cable issue. | Close unnecessary applications on your device. Ensure the cable is not damaged. |
| Charger feels warm. | Normal operation; insufficient ventilation. | It is normal for the charger to feel warm during operation. Ensure it is not covered and has adequate airflow. If it becomes excessively hot, disconnect immediately. |
Specifications
- Model Number: PWR-CE90PD
- Input: 12V-24V DC
- Output: 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 4.5A (Max 90W)
- Connector Type: USB Type C
- Cable Length: 10 feet (approx. 3 meters)
- Weight: 11.7 ounces (approx. 331 grams)
- Color: Black
- Special Features: UL Listed, Fast Charger, Charging Indicator
- Compatible Devices: Dell Latitude Precision XPS Inspiron, Lenovo IdeaPad Yoga, ThinkPad X1 Carbon, MacBook Pro, Razer Blade Stealth, Microsoft Surface Go, Huawei MateBook X Pro, Google Pixelbook, Samsung Notebook, Asus Zenbook, Acer Chromebook, Steam Deck, Oculus Quest 1/2, LG Gram (2021-2022 models), and other USB-C laptops, tablets, and smartphones.
Warranty and Support
This PWR+ product is backed by a 24-month exchange warranty and a 30-day refund policy. For warranty claims or technical support, please contact PWR+ customer service.
Image: A red circular stamp indicating a "2 Year Warranty" from PWR+.
PWR+ is a Washington, USA-based company committed to providing reliable products and customer support.
