Woods L38DB Portable Halogen Work Light User Manual

1. Introduction

Thank you for purchasing the Woods L38DB Portable Halogen Work Light. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your work light. Please read this manual thoroughly before use and retain it for future reference.

The Woods L38DB is a robust, portable halogen work light designed for various applications requiring bright, directed illumination. It features heavy-duty construction, a weatherproof switch, and a design optimized for cooler operation and extended bulb life.

2. Safety Information

WARNING: Halogen bulbs operate at extremely high temperatures. Failure to follow these safety instructions may result in fire, electric shock, or personal injury.

Always ensure the work light is unplugged before performing any assembly, maintenance, or bulb replacement.
Do not touch the halogen bulb or the metal housing immediately after use. Allow sufficient time for the unit to cool down.
Keep flammable materials away from the work light.
Do not operate the light with a damaged cord or plug.
Use only in a dry location. Protect from rain and moisture.
Ensure the light is placed on a stable, level surface to prevent tipping.
Do not look directly into the illuminated bulb.
This product is equipped with a grounded plug. Ensure it is plugged into a properly grounded outlet.
Keep out of reach of children.

3. Package Contents

Woods L38DB Portable Halogen Work Light Unit
300-Watt Halogen Bulbs (3 total: 2 installed, 1 spare in storage tube)
User Manual (this document)

4. Product Overview

Figure 1: Woods L38DB Portable Halogen Work Light. This image displays the red-colored work light with its protective metal cage, foam-padded handle, and stable base. The "POWER LIGHT" logo is visible on the front housing.

The Woods L38DB features a durable metal construction with a red finish. It includes a hinged face frame for easy bulb access, a foam-padded handle for comfortable transport, and foam feet for stability. A weatherproof on/off switch is integrated for reliable operation in various conditions. The unit also includes a dedicated storage tube for a spare halogen bulb.

5. Setup and Assembly

5.1 Unpacking

Carefully remove all components from the packaging.
Inspect the work light for any signs of damage. Do not use if damaged.
Ensure all listed package contents are present.

5.2 Bulb Installation (if not pre-installed)

Your work light comes with two 300-Watt halogen bulbs pre-installed and one spare bulb in a storage tube. If a bulb needs replacement or initial installation:

Ensure the unit is unplugged and cool to the touch.
Unlatch and open the hinged face frame.
Carefully remove the old bulb by gently pulling it straight out from its ceramic sockets. Avoid touching the new halogen bulb with bare hands, as oils can cause premature failure. Use a clean cloth or gloves.
Insert the new 300-Watt T3 halogen bulb by aligning its pins with the sockets and pushing it gently until seated.
Close and latch the face frame securely.

6. Operating Instructions

Place the work light on a stable, non-flammable surface.
Adjust the angle of the light head by loosening the side knobs, tilting the head to the desired position, and then tightening the knobs securely.
Plug the 5-foot 18/3 grounded power cord into a standard 120V AC grounded outlet.
Flip the weatherproof On/Off switch to the "ON" position to illuminate the light.
To turn off, flip the switch to the "OFF" position.
Always unplug the unit when not in use or before moving it.

7. Maintenance

7.1 Cleaning

Ensure the work light is unplugged and completely cool before cleaning.
Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Keep the glass lens clean for optimal light output.

7.2 Bulb Replacement

Refer to Section 5.2 "Bulb Installation" for detailed instructions on replacing the halogen bulb. Always use 300-Watt T3 type halogen bulbs.

7.3 Storage

Store the work light in a cool, dry place when not in use. Ensure the spare bulb is securely stored in its designated tube.

8. Troubleshooting

Problem	Possible Cause	Solution
Light does not turn on.	Not plugged in. Power outlet is not active. Bulb is burnt out. Switch is faulty.	Ensure power cord is securely plugged into a grounded outlet. Test the outlet with another device or check the circuit breaker. Replace the halogen bulb (refer to Section 5.2). Contact customer support if the switch is suspected to be faulty.
Light flickers.	Loose bulb connection. Faulty bulb.	Unplug the unit, allow to cool, and reseat the bulb. Replace the bulb.
Light is dim.	Dirty glass lens. Incorrect bulb wattage.	Clean the glass lens (refer to Section 7.1). Ensure a 300-Watt T3 halogen bulb is installed.

9. Specifications

Model:	L38DB
Brand:	Woods
Light Type:	Halogen
Wattage:	300 Watts
Voltage:	120 Volts
Brightness:	10800 Lumens
Bulb Type:	T3 Halogen
Cord Length:	5-Foot 18/3 Grounded
Material:	Metal
Color:	Red
Product Dimensions (W x H):	10.25" x 7.25"
Item Weight:	5.7 Pounds

10. Warranty and Support

10.1 Warranty Information

This Woods L38DB Portable Halogen Work Light is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accidents, unauthorized repairs, or normal wear and tear.

For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Woods customer support.

10.2 Customer Support

If you have any questions, require assistance, or need to report a problem with your Woods L38DB Portable Halogen Work Light, please contact Woods customer support.

Contact information for Woods customer support can typically be found on the product packaging, the official Woods website, or by searching for "Woods customer service" online.

Woods L38DB